The Container Store 12-Pair Shoe Organizer User manual

12-Pair
Shoe
Organizer
Assembly Instructions
Please read all of the information below before you begin.
Parts and Hardware
Step 1
Position one 24" shelf (A) and both side panels (B) so the finished
edge is facing up. Use the screws (F) to secure them together.
Assembly Tools Required
A. 24" Shelf (2)
B. Side Panel (2)
C. 3-Slot Divider (2)
D. 2-Slot Divider (3)
E. Back Panel (1)
F. Screw (8)
G. Screw Cover (8)
H. Nail (6)
I. Dowel Cover (2)
J. Dowel (2)
Hammer
#2 Phillips head screwdriver
Step 2
Attach the other 24" shelf (A) at the opposite end, using the screws
(F) provided. Cover all holes with screw covers (G).
A
B
B
F
A
F
G
AC
D
B
E
F
G
H
I
J

WARNING CHOKING HAZARD — This unit contains small parts. Not for children under 3 years old.
©2013 The Container Store
®
Inc. All rights reserved. 17652 1/13
Step 3
Slide the 3-slot dividers (C) and 2-slot dividers (D) together as shown.
Step 4
Insert the combined dividers into the frame (fit into grooves).
Step 5
Position the back panel (E) over the center of the back of the unit.
Secure the back panel with a hammer and nails (H), being careful
to drive the nails straight in (not at an angle).
Step 6
If stacking more than one unit, use the dowels (J) to join them.
Insert the dowel covers (I) into the dowel holes on the top unit.
HJ
C
D
E
I