The Container Store TEAK BOOKCASE User manual

x 24
To do efficient assembling:
Check the contents of the plastic bag with hardware and sort out
properly.
Have the necessary tools for assembly ready.
Unpack and sort out the various components of the book case.
Arrange for sufficient free space to do the assembling.
Arrange for a Second Person to assist:
Tools Needed:
The plastic bag contents:
Bolt
Short
screw
Long
screwWasher Locking
device
Safety
bracket
x 8 x 8 x 8 x 24 x 2
Please call 1-800-733-3532 for more information.
TEAK BOOKCASE ASSEMBLY

Various Components:
A - Top & Bottom Shelf B - Side Panels
C - Middle Shelf D - Back Panels
- Each panel has a label.
- When installing panels, label should face the back of the unit.

Screw in the bolts.
Turn until tight.
Do not
overtighten.
Make sure
arrows are
pointing at the
screws before
attaching
Lock gently. One
quarter turn only
to lock.
Step No. 1
Step No. 2
C
Locking
device
Locking
device
Bolt
Add locking
device in slot with
arrow pointing
towards hole on side
LOCKING DEVICE
HOLES FACING
THE BOTTOM
Bottom

Top
Make sure
arrows are
pointing at the
screws before
attaching
Lock
gently.
One
quarter
turn
only to
lock.
Step No. 3
Step No. 4
Install back
panels in order
starting with
D1, D2, D3,
D4, D5
D5
D4
Top
Put pressure on
the back panel
to flatten it

Bottom
Make sure
arrows are
pointing at the
screws before
attaching
Step No. 5
Step No. 6
D1
D5
D4
D3
D2
Top
1
2
3
4
Put in short
screws in
between panels
starting at
bottom (4)
Bottom
IT IS IMPORTANT
TO PUT THE SCREWS IN
BETWEEN PANELS (1,2,3,4)
SO THE BACK PANEL WILL BE FLAT

Safety bracket Option:
To keep the Bookcase in Good Condition:
Don’t use force during assembly.
Tighten the screws after one month.
Keep the assembly tools in a safe place.
Keep the assembly instructions in a safe place.
Please call 1-800-733-3532 for more information.
Use long screws
Use mild furniture polish to clean the bookcase.