Vari 401920 User manual

NOTE: We recommend installing the casters with the desk on a so cloth or debris-free at
surface to reduce any potenal scratches to the desktop.
With assistance, carefully ip over the assembled desk (along its back edge, to avoid damaging
the control panel) so that the legs and leveling footpads are facing up.
Electric Standing Desk Casters
x4
CASTER
x1
14mm WRENCH
VARI©ELECTRIC STANDING DESK
1
2
Rotate the footpads counterclockwise to detach them from the desk’s feet.
Also Needed (Sold Separately)
2 People Required
for Assembly
DESK WEIGHT CAPACITY WITH CASTERS INSTALLED
ESD
72x30
ESD
60x30
ESD
60x24
ESD
48x30
Curve ESD
60x30
Ergo ESD
54x26
Essenal ESD
48x24
Essenal ESD
48x24
Split Top
Up to 180 lb
(81.6 kg)
Up to 200 lb
(90.7 kg)
Up to 200 lb
(90.7 kg)
Up to 220 lb
(99.8 kg)
Up to 200 lb
(90.7 kg)
Up to 200 lb
(90.7 kg)
Up to 150 lb
(68 kg)
Up to 150 lb
(68 kg)

Patent and trademark informaon: vari.com/patents
©2023 Varidesk, LLC All rights reserved.
[phone]
Insert the threaded post of each caster into the now-open holes.
Use the provided 14mm wrench on the caster’s nut to turn the
caster clockwise unl fully ghtened.
3 4
To prevent the desk from sliding, press the brake on each caster unl it locks into place. Then, with assistance, carefully ip
over the assembled desk (along its back edge, to avoid damaging the control panel) so that the desk is again upright.
Before rolling the desk to a dierent locaon, unlock the casters by pulling each brake lever upward. The casters can be
relocked once the desk is in the desired locaon.