Mocka Kennedy Buffet User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
A B C D E F G H
J K L M N O P I
Hardware Supplied
dowel
x12
screw
x30
bolt
x12
locking
nut x12
bracket
x2
bracket
x4
long
bolt x4
hinge
x4
shelf
plug x8 allen
key x1
wedge
x6
bolt
x16
cover
x2
plug
x2
screw
screw
x6
x8
*We recommend using a Flathead screwdriver to tighten
all locking nuts 100% before rst use.
Please clear any loose wood from the locking nut holes
before inserting the nut to ensure it locks 100%.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
x16
washer
Q
Kennedy Buffet
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 6x bolts (B) into the underside of panel [1]. Attach 2x brackets (E)
as shown and secure with 4x screws (D). Tighten with a screwdriver.
Attach 2x covers (F) over the brackets as shown.
Attach panels [3], [4] and [5] to panel [1] using 6x dowels (A) and secure
with 6x locking nuts (C). Tighten with a screwdriver.
B
5
4
3
1
1
E
D
F
B
B
B
B
DD
DB
F
E
C
A
C
A
C
AC
A
C
A
C
Kennedy Buffet
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Insert 6x bolts (B) into the underside of panel [1]. Attach 2x brackets (E)
as shown and secure with 4x screws (D). Tighten with a screwdriver.
Attach 2x covers (F) over the brackets as shown.
Attach panels [3], [4] and [5] to panel [1] using 6x dowels (A) and secure
with 6x locking nuts (C). Tighten with a screwdriver.
B
5
4
3
1
1
E
D
F
B
B
B
B
DD
DB
F
E
C
A
C
A
C
AC
A
C
A
C
3
Slide panel [7] down along the grooves between the side panels to
form the back of the unit.
Insert 6x bolts (B) into panel [2].
4
B
B
B
B
B
B
5
4
3
7
7
2
Kennedy Buffet
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panel [2] to the main unit using 6x dowels (A) and 4x locking
nuts (C). Tighten with a screwdriver.
Attach a leg bracket (I) to each leg [10] using 2x screws (O) and 1x long
bolt (J). Tighten the bolt with the allen key (N) as shown. Attach the legs
[10] to panel [2] as shown using 16x bolts (H) and 16x washers (Q).
Tighten with the allen key (N).
A
2
C
C
C
C
C
C
A
A
AA
A
5
4
3
I
H
N
J
N
O
Ox4
10
210
10
10
Q
H
Q
H
Q
front
Front
back
Kennedy Buffet
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panel [2] to the main unit using 6x dowels (A) and 4x locking
nuts (C). Tighten with a screwdriver.
Attach a leg bracket (I) to each leg [10] using 2x screws (O) and 1x long
bolt (J). Tighten the bolt with the allen key (N) as shown. Attach the legs
[10] to panel [2] as shown using 16x bolts (H) and 16x washers (Q).
Tighten with the allen key (N).
A
2
C
C
C
C
C
C
A
A
AA
A
5
4
3
I
H
N
J
N
O
Ox4
10
210
10
10
Q
H
Q
H
Q
front
Front
back
78
Attach 2x hinges (K) and 1x plug (G) to panel [8] and secure with 5x
screws (D). Attach 2x hinges (K) and 1x plug (G) to panel [9] and
secure with 5x screws (D). Tighten with a screwdriver.
Insert 8x shelf plugs (L) into the cabinet as shown.
G
9
8
D
K
D
D
D
D
D
D
D
D
D
K
K
K
G
L
L
L
L
D
G
Kennedy Buffet
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
insert shelf panels [6] into the cabinet, ensuring they rest level on the
shelf plugs (L).
Attach door panels [8] and [9] to the main unit as shown, using 4x small
screws (D) to secure each hinge (K). Tighten with a screwdriver.
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
D
9
8
6
6
D
D
K
Kennedy Buffet
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
insert shelf panels [6] into the cabinet, ensuring they rest level on the
shelf plugs (L).
Attach door panels [8] and [9] to the main unit as shown, using 4x small
screws (D) to secure each hinge (K). Tighten with a screwdriver.
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
D
9
8
6
6
D
D
K
11
12
Attach 6x wedges (M) to the corners of the back panel and secure with
6x screws (P). Attach 1x safety strap (Y) to the top of the back side of
the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with
a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x wall plug (X), 1x washer (Z) and 1x long screw (Y). Ensure unit
is balanced and steady before use. You’re done, enjoy!
Wall Mount
Z
X
Y
wall
plug
screw
strap
washer
V
W
Z
Z
V
W
P
MP
P
P
P
PM
M
M
M
M
Kennedy Buffet
Assembly Instructions
7
mocka.co.nz | mocka.com.au