The Handy THFST User manual

OPERATOR’S MANUAL & PARTSLIST
MODEL –THFST
FOLDING SACK TRUCK
Spares & Support: 01793 333212
Please read & understand this manual, paying particular attention to the safety
instructions, before use.
The manufacturer reserves the right to change the product specification and
livery according to continued product improvements.
193841002 12/10/2015

CONTENTS
SAFETY INSTRUCTIONS
SPECIFICATIONS
MAINTENANCE
PARTS DIAGRAM
PARTS LIST
GUARANTEE

SAFETY INSTRUCTIONS
Read and understand the owner’s manual and labels affixed to the machine. Learn its
application and limitations as well as the specific potential hazards. Retain these
instructions for future reference. The operator is responsible for following the warnings &
instructions in this manual and on the product.
Preperation
1. Keep the work area tidy & well lit.
2. Never carry out alterations or modifications to this product.
3. Always load evenly with the centre of gravity of the load as near the centre and rear of
the plate as possible.
4. Obtain additional support for large or wide loads to prevent tipping.
5. Do not transport tall loads, which may impair your forward view.
6. Take care that the heaviest part of a tall load is to the bottom of the truck touching the
frame.
7. When stacking loads ensure that the height of the stack does not extend above the
handle.
8. DO NOT overload the truck - see Specification.
9. DO NOT leave unattended, especially when loaded, unless the wheels are chocked or
the truck is otherwise secured.
10. DO NOT use truck on uneven ground and do not run over curbs or steps - use a ramp.
11. DO NOT allow others to ride on the truck.
12. DO NOT use the truck if any part is damaged, paying particular attention to the wheels
Use
1. Fold down the toe plate ready to accept a load.
2. The handle can be extended by compressing the tabs on the central bar and pulling up
on the handle. Pull upwards until a 'click' is heard where location pins have been housed
in location holes of the handle.
3. IMPORTANT! DO NOT overload the sack truck. DO NOT try to carry loads that make the
truck unstable.
4. Slowly lean the sack truck backwards to take the weight of the load.
5. Proceed at a safe speed especially at corners where there could be a danger of the load
shifting.
6. Extra care should be taken on inclined surfaces.
7. Where there is a curb or step, a ramp should be used.
8. After use fold up the toe plate and retract the handles by compressing the tabs on the
central bar and applying downward pressure to the handle.
9. Store in a safe dry place.
10. Periodically check all fittings are tight and the wheels are secure.
11. The toe plate does not lock when in an upright/folded position. Store the truck with the
toe plate folded and facing a wall or similar structure to prevent the toe plate falling
unexpectedly.

SPECIFICATION
Model
THFST
Product Number
193841002
Weight
12kg
Max Capacity
200kg
Tyre
Punctureless
Tyre Size
10x4.10/3.50-4
Height (Folded/Unfolded)
800mm/1130mm
Overall Width (including tyres)
480mm
Toe Plate Dimensions (Width/Depth)
310mm/285mm
The manufacturer reserves the right to change the product specification and livery
according to continued product improvements.
MAINTENANCE
Store the Folding Sack Truck in a dry area
Maintenance spray or multi-purpose grease can be applied to the height tabs on the
central bar and wheels prior to storing.

PARTS DIAGRAM & PARTS LIST
No
Part No
Description
Qty
1
TH218-1
Wheel & Tyre (10x4.10/3.50-4)
2
2
TH218-2
Wheel Washer (20mm)
2
3
TH218-3
Split Pin (2.5mm)
2

GJ HANDY & CO LTD USER WARRANTY POLICY
1. Users Statement of Warranty
Each new machine is warranted against defective material or assembly of material under normal
usage. The warranty applies to the original purchaser and covers faulty parts and the labour
involved in replacing and repairing those parts, which are of original manufacture.
2. Period of Warranty
All Webb, Handy Pro (Brushcutter & Long Handle Hedgecutter only) and Sanli products
(a) 2 years from the original date of sale to the first domestic user.
(b) 90 days from the original date of sale to the professional/commercial user.
(c) 90 days from the original date of sale when used for hire.
(d) Engines as per the manufacturer’s warranty statement which will be supplied with the
machine.
(e) 1 year from the original date of purchase for Replacement Spare Parts (unless normal
wear & tear component, which are covered for 90 days).
(f) All machines’ must be serviced within the first 12 months from the original date of
purchase to comply with the warranty, failure to do so will invalidate the 2nd year of the
warranty.
(g) A reduced warranty period of ninety days applies to those items which are subject to
normal wear and tear (e.g. wheels, tyres, cutter bars, cylinders, bottom blades, belts,
cables, grass bags, spark plugs).
All Handy, Handy Pro (All others), Mowerland and Q-Garden products
(a) 1 year from the original date of sale to the first domestic user.
(b) 90 days from the original date of sale to the professional/commercial user.
(c) 90 days from the original date of sale when used for hire.
(d) Engines as per the manufacturer’s warranty statement which will be supplied with the
machine.
(e) 1 year from the original date of purchase for Replacement Spare Parts (unless normal
wear & tear component, which are covered for 90 days).
(f) A reduced warranty period of ninety days applies to those items which are subject to
normal wear and tear (e.g. wheels, tyres, cutter bars, cylinders, bottom blades, belts,
cables, collection bags, spark plugs).
All warranty repairs must be undertaken by an authorised service dealer. These dealers have
been accredited by GJ Handy & Co Ltd and agree to only use genuine parts and follow our
repair procedures.

GJ HANDY & CO LTD USER WARRANTY POLICY
3. Not covered by this warranty
(a) The warranty policy does not cover any depreciation or damages caused by ordinary
wear, rusting or corrosion, lack of correct maintenance or operation, misuse, abuse, lack
of transportation or accident.
(b) The warranty policy does not cover any costs necessary for the standard periodic
maintenance services instructed by the operators manual, or service parts replacement
which would include oil, filters, tyres, belts, brake linings, fuses, blades, seals and other
service parts unless it can be proven that the item has evidence of faulty manufacture.
(c) The warranty policy will not cover failure or damage caused as a result of parts or
accessories being modified without the written approval of GJ Handy & Co Ltd.
(d) The warranty policy will not cover the unit if non-genuine parts have been fitted and as a
result damage has occurred to the unit.
(e) The warranty policy is non-transferable and is only applicable to the original purchaser.
4. Disclaimer
(a) This warranty is only a remedy for defect of products. GJ Handy & Co Ltd will never
warranty in terms of the merchantability or the fitness for a particular purpose.
(b) No person is authorised to make any warranties, representations or promises, expressed
or implied, on behalf of GJ Handy & Co Ltd, or to modify the terms conditions or
limitation of this warranty policy in any way.
(c) Neither GJ Handy & Co Ltd nor any company affiliated with GJ Handy & Co Ltd shall be
liable in any event or manner whatsoever for incidental or consequential damages or
injuries, including, but not limited to, loss of crops, loss of profit, out of pocket expenses
or profits, rental of substitute equipment or other commercial losses.
5. General
(a) Most warrantable failures show up within the first few weeks of use. These failures are
usually straightforward and warranty assessment is relatively easy.
(b) Failures relating to cutter decks and belts need careful investigation, as the cause may
not always be straightforward. Look for damage to blades and pulleys especially when
the cutter belt or blade boss have snapped or cracked as this could be due to impact
damage.
(c) Customers should always refer to the operator/instruction manual when any disputed
problem arises, you will find most areas covered within the manual.

For Spares or Support of your Handy product, please contact us:
Tel: [phone]
(Mon –Fri 8.30am to 5.00pm)
Email: [email protected]
Tosee our complete range of garden machinery and equipment
visit:
www.thehandy.co.uk
Distributed by Handy Distribution, Murdock Road, Dorcan, Swindon, SN3 5HY