Therian All-Aluminium Dog Bed User manual

Assembly Instructions
All-Aluminium Dog Bed
Parts List
• (A) 1 x Fabric
• (B) 4 x Top Corners
• (C) 4 x Bottom Corners
• (D) 8 x Bolts
• (E) 8 x Nuts
• (F) 8 x Washers
• (G) 4 x Screws
Pipes
• (H) 2 x Long Frame Pipes
• (I) 2 x Short Frame Pipes
• (J) 4 x Leg Pipes
• (K) 2 x Long Rods
• (L) 2 x Short Rods
*For ballistic nylon &
outdoor mesh fabrics only
Tools Required
• Flat Surface To Work On
• Phillips Head Screwdriver
• Adjustable Wrench or Pliers
• Optional: Rubber Mallet
*Do not use power tools.
(A) Fabric (C)BottomCorners
(D) Bolts
(F) Washers
(G) Screws
(E) Nuts
(B) Top Corners
(I) Short Frame Pipes
(H) Long Frame Pipes
(J) Leg Pipes
(K, L) Fabric Rods* 1
(J)
(J)
(J)
(C)
(C)
(C)
(B)
(B)
(A)
(I)
(H)
(B)
(I)
(H)
(B)

(A)
(A)
(A)
(B)
(C)
(D)
(E)
(F)
(H)
(L)
(K)
(H)
(I)
2
Step 1.
*For only ballistic nylon and
outdoor mesh fabric. If you have
the vinyl fabric, skip this step.
With the fabric (A) seams facing
up, insert the long rods (K) into
the long edges of the fabric.
Insert the short rods (L) into the
short edges of the fabric.
Step 2.
With the fabric (A) seams
still facing up, insert the long
edges of the fabric into the
channel of tier pipe (H).
Insert the short edges of the
fabric into the channel of
tier pipe (I).
Step 3.
With (A) fabric seams still facing
up, secure tier pipes (H) and
(I) between a top corner
underneath (B) and a bottom
corner above (C).
Lightly secure with a bolt (D),
washer (F) and nut (E).
Repeat for all 4 corners.
Once corners are assembled,
completely fasten nuts.
NOTE:
Over tightening of the corners may result
in cracking, which is NOT covered by the
1 year chew-proof warranty.
Assembly Instructions
All-Aluminium Dog Bed

Assembly Instructions
3
Product Advisory
To maximize the life of the corner ttings, do not use excessive force to tighten bolts and nuts. Do
not use power tools to assemble the bed. Using power tools may result in screws to fall out over
time. Please be aware that over tightening the nuts located on the corners of the beds can cause
enough added stress that the corner pieces may fail. Periodically check hardware to prevent
indigestion hazards to dogs and cats.
Cleaning
It is recommended to use warm soapy water and hose down or pressure clean the Kuranda beds.
One Year Chew-Proof Warranty
We guarantee the structural integrity of each of our Kuranda beds for a period of one year from
the original date of purchase of the bed. If your dog or cat is able to damage any part of the
frame or fabric by chewing beyond usability, we will send out replacement parts free of charge.
The 1 year chew-proof warranty does not cover cosmetic damage or damage caused by
persistentscratching/digging; nor corner pieces that fail due to over-tightening of bolts and nuts.
All-Aluminium Dog Bed
(C)
(J)
(B)
(J)
(C)
(G)
Step 4.
Insert leg pipes (J) with the
leg caps facing up, into the
open bottom corners (C).
Secure legs into bottom
corners with screws (G).
Step 5.
Flip the bed over so the leg caps are
on the ground. Ensure the corners
are secure and level to complete
the All-Aluminium Dog Bed.
Therian Pty Ltd.
therian.com.au/kuranda | e[email protected]
1800 251 766 | 07 5657 6777
Unit 4, 26 Commercial Drive,
Ashmore, QLD, 4214, Australia