Thermaltake VG6000BNS User manual

2007 Thermaltake Technology Co.,Ltd. All Rights Reserved. www.thermaltake.com
C
All other registered trademarks belong to their respective companies.
VG6000 Series
User's Manual

2007 Thermaltake Technology Co.,Ltd. All Rights Reserved. www.thermaltake.com
C
All other registered trademarks belong to their respective companies.
VG6000 Series
User's Manual

ContentsContents Chapter1. Product IntroductionChapter1. Product Introduction
1.1 Specification
1
Chapter 1. Product Introduction
1.1 Specification
4.1 RSI Cooler(Optional)
4.2 RSI Power Supply (Optional)
Chapter 4 RSI Cooler and Power Supply
Chapter 2 Case Mechanical Operation
1
2
3
3
5
5
7
8
9
11
12
12
13
13
14
15
Micro ATX , Standard ATXMotherboards
Transparent window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25 , 2 x 3.5
5 x 3.5
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
Micro ATX , Standard ATXMotherboards
Transparent window
Honeycomb see -
through window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25", 2 x 3.5"
5 x 3.5"
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
2.1 How toopen the sidepanel
2.8 Front faninstallation (optional)
2.2 How toinstall PSU
2.3 5.25" deviceinstallation
2.5 3.5" deviceinstallation
2.6 Motherboard installation
2.4 HDD installation
2.7 PCI slotusage
Chapter3 Motherboard & Leads Installation
3.1 Motherboard Installation
3.2 Case LEDconnection
3.4 eSATA connection
3.5 Audio Connection
3.3 USB 2.0connect

ContentsContents Chapter1. Product IntroductionChapter1. Product Introduction
1.1 Specification
1
Chapter 1. Product Introduction
1.1 Specification
4.1 RSI Cooler(Optional)
4.2 RSI Power Supply (Optional)
Chapter 4 RSI Cooler and Power Supply
Chapter 2 Case Mechanical Operation
1
2
3
3
5
5
7
8
9
11
12
12
13
13
14
15
Micro ATX , Standard ATXMotherboards
Transparent window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25 , 2 x 3.5
5 x 3.5
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
Micro ATX , Standard ATXMotherboards
Transparent window
Honeycomb see -
through window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25", 2 x 3.5 "
5 x 3.5"
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
2.1 How toopen the sidepanel
2.8 Front faninstallation (optional)
2.2 How toinstall PSU
2.3 5.25" deviceinstallation
2.5 3.5" deviceinstallation
2.6 Motherboard installation
2.4 HDD installation
2.7 PCI slotusage
Chapter3 Motherboard & Leads Installation
3.1 Motherboard Installation
3.2 Case LEDconnection
3.4 eSATA connection
3.5 Audio Connection
3.3 USB 2.0connect

3
2
11
11
11
11
33
22
22
22
22
Chapter 2 Case Mechanical OperationChapter 2 Case Mechanical Operation
2.1 How to open the side panel
Toremove the side panel, please
remove upper andbottom thumb
screws on theback of the case.
Push the handlethen swing out the side panel.
Transparent side panel
Honeycomb see-through side panel
Toremove the side panel,
please remove upperand
bottom thumb screwson the
back of thecase.
Insert the providedkey and
turn it clockwise.
Push the handlethen swing out the side panel.
2.2 How to install PSU
Place power supplyunit
in the rightposition.
2.3 5.25" device installation
Open the frontdoor first. Remove the 5.25"drive bay plastic
cover by pressingit at the bottom
corner .
Secure it byscrews as shown.
2
1

3
2
11
11
11
11
33
22
22
22
22
Chapter 2 Case Mechanical OperationChapter 2 Case Mechanical Operation
2.1 How to open the side panel
Toremove the side panel, please
remove upper andbottom thumb
screws on theback of the case.
Push the handlethen swing out the side panel.
Transparent side panel
Honeycomb see-through side panel
Toremove the side panel,
please remove upperand
bottom thumb screwson the
back of thecase.
Insert the providedkey and
turn it clockwise.
Push the handlethen swing out the side panel.
2.2 How to install PSU
Place power supplyunit
in the rightposition.
2.3 5.25" device installation
Open the frontdoor first. Remove the 5.25" drive bay plastic
cover by pressingit at the bottom
corner .
Secure it byscrews as shown.
2
1

5
4
77
11
88
22
3344
1122
44
5566
33
Remove the 5.25"drive bay metal cover.
Mount drive railsto 5.25" device and fasten thedevice using screws.
Find the drivebay rails right
behind the plasticdrive bay
cover.
Slide the 5.25"device into
drive bay tillthe fix-position. 5.25" device installation
complete.
2.4 HDD installation
Press the clipon each side of
the HDD trayand pull backward
to take offthe HDD tray.
Place HDD onthe drive tray,
then secure HDDby screws.
HDD installation complete.
Unscrew the 3.5"metal cover.
2.5 3.5" device installation
Slide HDD trayinto the
cage till thefix-position.
Press the clipon each side of the
3.5" tray andpull backward to
take off the3.5" tray.

5
4
77
11
88
22
3344
1122
44
5566
33
Remove the 5.25"drive bay metal cover.
Mount drive railsto 5.25" device and fasten thedevice using screws.
Find the drivebay rails right
behind the plasticdrive bay
cover.
Slide the 5.25"device into
drive bay tillthe fix-position. 5.25" device installation
complete.
2.4 HDD installation
Press the clipon each side of
the HDD trayand pull backward
to take offthe HDD tray.
Place HDD onthe drive tray,
then secure HDDby screws.
HDD installation complete.
Unscrew the 3.5"metal cover.
2.5 3.5" device installation
Slide HDD trayinto the
cage till thefix-position.
Press the clipon each side of the
3.5" tray andpull backward to
take off the3.5" tray.

7
6
11
33
445533
4455
Place and fasten3.5" device by screws.
3.5" device installation
complete.
2.6 Motherboard installation
Remove thumb screwson the motherboard tray.
Slide the motherboardtray
toward the drivesand remove it.
22
Place the motherboardtray on a flat
surface and mountthe motherboard.
Place the motherboardtray
back to thecase and slide it
back to theposition.
Screw up thethumb screws.
Slide the 3.5"tray into drive
bay till thefix-position.
Note:
While doing motherboardinstallation,
please also referto Page 11.

7
6
11
33
445533
4455
Place and fasten3.5" device by screws.
3.5" device installation
complete.
2.6 Motherboard installation
Remove thumb screwson the motherboard tray.
Slide the motherboardtray
toward the drivesand remove it.
22
Place the motherboardtray on a flat
surface and mountthe motherboard.
Place the motherboardtray
back to thecase and slide it
back to theposition.
Screw up thethumb screws.
Slide the 3.5"tray into drive
bay till thefix-position.
Note:
While doing motherboardinstallation,
please also referto Page 11.