Thermaltake Pure 12 ARGB Sync User manual

Installation Guide
ARGB Controller Installation Guide
Parts List
12
4
3
Install the fans properly onto the radiator
Connect the PWM
cable to mainboard.
Connect the Fans in series
1
C x 12
Mainboard Signal
Bridge Cable
(ASUS,MSI, )GIGABYTE
B x 1
ARGB Controller
E x 1
Long Screw
A x 3
Fan
D x 12
Short Screw
G x 1
PWM Cable
Connect the fan power cable to PWM cable
2
Connect the ARGB controller to the Fans. Connent the ARGB controller to the SATA connector.
A
G
B
B
G
A
A
Radiator Fan TT Premium Edition
16.8 Million Color
Pure ARGB Sync

ARGB Controller
Mianboard SYNC installtation Guide
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Please power off the PC and check
the Positive and Negative ends on
the connector before connecting
the cable to mainboard. Connecting
the wrong end can damage the fans.
CAUTIONCAUTION
1. Light Mode:
Switch over between 7 LED modes.
3. Light Speed:
Switch over between 4 light modes.
When light mode is in RGB Spectrum:
Click to memorize and lock the color you want, click again to unlock the 256
colors auto rotation.
Red → Yellow → Green → Teal → Blue → White → Purple
When light mode is in Ripple :
Switch over 7 LED colors .
LED color can not be adjusted.
When light mode is in Wave and Flow :
Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
2. Color Mode:
When light mode is in Full Lighted, Pulse and Blink :
Switch over 8 LED colors .
Rainbow Full light → RGB Spectrum → Off → Flow → Ripple → Pulse → Blink→
Slow → Normal → Fast → Extreme
Connect the Mainboard Signal Bridge Cable to fan led cable
E
Aura Addressable Strip Header(s) AOURS RGB Fusion with Digital LEDs
ASUS GIGABYTE
E
JRGB-strip Header(S)
MSIMSI
E E
+5V D G
JRAINBOW