ARGB Controller
Mianboard SYNC installtation Guide
© 2018 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Please power off the PC and check
the Positive and Negative ends on
the connector before connecting
the cable to mainboard. Connecting
the wrong end can damage the fans.
CAUTIONCAUTION
1. Light Mode:
Switch over between 7 LED modes.
3. Light Speed:
Switch over between 4 light modes.
When light mode is in RGB Spectrum:
Click to memorize and lock the color you want, click again to unlock the 256
colors auto rotation.
Red → Yellow → Green → Teal → Blue → White → Purple
When light mode is in Ripple :
Switch over 7 LED colors .
LED color can not be adjusted.
When light mode is in Wave and Flow :
Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
2. Color Mode:
When light mode is in Full Lighted, Pulse and Blink :
Switch over 8 LED colors .
Rainbow Full light → RGB Spectrum → Off → Flow → Ripple → Pulse → Blink→
Slow → Normal → Fast → Extreme
Connect the Mainboard Signal Bridge Cable to fan led cable
E
F
Aura Addressable Strip Header(s) Addressable RGB LED Header(s) AOURS RGB Fusion with Digital LEDs
ASUS ASROCK GIGABYTE
E E F
JRGB-strip Header(S)
MSIMSI
E
