Thermo Scientific Uniry Lab Services UP150 Instruction Manual

Operation
UP150 Controller
SEG Segment indicator operations in the Reset Standby Mode
UP150 Controller
Revision Date: June 30, 2017

UP150 SEG Operation in Reset Mode
2 of 2 www.unitylabservices.com/contactus
While the UP150 is in the Reset/Standby Mode with all indicators extinguished, the Segment
function can be viewed.
However, because the Controller is not running, the values will be Zeros (0 or 0.00).
There are no operational selections or changes made using this button sequence.
A single press of the SET/ENT button will illuminate the SEG indicator and make the lower
display show the Segment number 0.
Another press of the SET/ENT button will make the lower display show a Time value of 0.00.
Another press of the SET/ENT button will extinguish the SEG indicator and return the lower
display to the Local Setpoint being used in the Local Mode.
While in Reset Mode, press SET/ENT SEG indicator illuminates and the
Button segment number 0 is in Lower display
Another press of the SET/ENT button Another press of the SET/ENT button
shows a Time value of 0.00 extinguishes the SEG indicator