Thermo Sphere MH-0600 User manual

HEATING | WALL | MIRROR
Excellence in heating solutions.

HEATING | WALL | MIRROR
2
Low prole, only 1mm thick
Energy efcient heating element
Self adhesive backing
2m Connection cable
Easy to conceal connection
Electric mirror heater
Upgrade a standard bathroom mirror by installing a ThermoSphere mirror heaters. A heated mirror gives you
the convenience of steam free mirrors after a hot bath or shower. The simple one cable connection and full self
adhesive backing make ThermoSphere mirror heaters fast and easy to install. A cost effective luxury upgrade for
any mirror.

HEATING | WALL | MIRROR
3
Simple installation
Low prole
Simply x to the back of mirror with the self adhesive backing and connect
the lighting circuit or our dual control.
Only 1mm thick with a low prole, 5mm cable connection. Simply cut a
rebate into the plasterboard. No back box required.
Safe in bathrooms
Energy efcient
The heater pad is concealed behind the mirror, and all electrical connections
are within the wall or ceiling cavity.
The low voltage output uses minimal energy to keep your mirrors steam free.
A heated mirror ensures steam free mirrors after a bath
or shower
1MM

4

HEATING | WALL | MIRROR
5
Stock Code Description Size
MH-DST Double Sided Tape 25mm x 50m
MH-ADH Mirror Adhesive 310ml
PIR-01 PIR Movement Sensor
Stock Code Description Shape Output (W) Size (MM)
MH-0600 Mirror Heater Rectangular 57 400 x 600
MH-0800 Mirror Heater Rectangular 96 600 x 800
MH-0900 Mirror Heater Rectangular 108 600 x 900
MH-1000 Mirror Heater Rectangular 150 750 x 1000
MH-1200 Mirror Heater Rectangular 204 850 x 1200
MH-1300 Mirror Heater Rectangular 260 1000 x 1300
MHO-0600 Mirror Heater Oval 45 400 x 600
MHO-0800 Mirror Heater Oval 76 600 x 800
MHR-0380 Mirror Heater Round 20 380 ø
MHR-0520 Mirror Heater Round 41 520 ø
Installation accessories
ThermoSphere Electric mirror heaters

6
HEATING | WALL | MIRROR
Use the self adhesive backing to x the mirror heater to the back
of the ThermoSphere mirror adhesive should be applied around
the perimeter of the mirror.
Lay your mirror onto a clean towel to ensure no scratches or
blemishes are formed when applying the heated element.
Wire the mirror heater into a marshalling box behind the mirror.
Then line the mirror up ensuring a 5mm gap is maintained around
the perimeter of the mirror. If installing ush with tiles gently
apply pressure around the outside of the mirror and allow all
adhesives to fully cure before powering up your mirror heating.
If you’re using mechanical xings, ensure they are not within
10mm of the heater pad.
Adhere heater to back of the mirror Wire up and x to the wall
The heated mirror can be installed on walls made of wood,
ceramic tiles, marble, etc. Walls must be dry, stable, smooth and
preferably insulated.
PRO TIP
To avoid damage to the mirror, do not over tighten xings and
ensure that no point pressure is applied to the mirror.
PRO TIP
1
5
2
4
3
1Mains supply Mirror heater
2Mirror
3Power cable
5Wall
Mirror
4

HEATING | WALL | MIRROR
7
P
I
R
ThermoSphere mirror heater requires a mains supply, marshalling
box and a switch or PIR sensor. Measure and mark out all the
necessary items before you install the electric mirror heater.
If necessary chase into the wall to accommodate xtures and
wires.
If you are installing your mirror into a rebate within the tiles,
ensure you leave a 5mm gap around the perimeter of the mirror.
Any contact with hard materials could result in a breakage.
Mirror heaters can be controlled with the ThermoSphere dual
control. Connect the mirror cold tail to the secondary relay, as
shown above.
ThermoSphere electric mirror heaters can be wired into an existing
lighting circuit using a PIR.
Remember to position the mirror heater connection box and
power cable in the closest available position to your electrical
connection to the PIR.
Wiring to a light circuit Wiring to a PIR sensor
P
I
R
Thermomirror Thermomirror
Light
Light
Switch
PIR
Ensure mains supply
is RCD protected
Ensure mains
supply is RCD
protected
!
!
ThermoSphere mirror heater
5mm Expansion Gap
Tiles
!

TS_SB_HW01
Excellence in heating solutions.
0800 019 5899
[email protected]
www.thermosphere.com
ThermoSphere
Pattenden Lane
Marden
Kent
TN12 9QJ
_Thermosphere
/Thermosphere
@_Thermosphere
ThermoSphere is a trading name of Thermogroup Ltd.