Thermo Sphere QGW15-447 User manual

Electric Utility Heater
Stop
Please read and understand this manual before any assembly
or use of this product.
Before beginning assembly of product, make sure all parts
are present.
Customer Service: 1-888-538-0082 / [email protected]
Instruction Manual
Electric Utility Heater
Model No. QGW15-447

Electric Utility Heater
2
Table of Contents
Specifications
Important Safety Instructions
Operating Instructions
Important Safety Features
Care and Maintenance
Warranty
2
3
5
6
6
6
Specifications
Model Number : QGW15-447
Voltage Rating : 120 V AC (60 Hz)
BTU Output : 5,120 BTUs
Amps : 12.5 A
Unit Size : 5” (W) x 6.3” (D) x 5” (H)
Unit Weight : 2.66 lbs.

3
Electric Utility Heater
Important Safety Instructions
Important Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
1. Read all the instructions before using this heater/fan.
2. This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use provided
handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers,
clothes and curtains at least 3 feet (0.9 meters) from the front of the heater-fan and keep them away
from the sides and rear.
3. Do not leave heater operating while unattended. Use of extreme caution is necessary when any heater is
used by or near children, invalids, disabled persons or pets.
4. Do not operate the heater with a damaged power cord or after the heater malfunctions, has been
dropped or damaged in any manner. Return heater to authorized service facility for examination,
electrical or mechanical adjustment or repair.
5. Do not use heater outdoors.
6. Use your heater only in dry environments. This heater is not intended for use in a bath room, laundry
area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water.
Never locate heater where it may fall into a bathtub or other water container. Do not use in damp
environments such as flooded basements.
7. Do not place the heater on a small, unlevel, uneven or any surface which might allow heater to tip or fall.
8. For proper operation, heater should be placed on a smooth, non-combustible surface. Do not place on
rugs, carpet, vinyl flooring or other plastic surfaces. Not for use outdoors or in wet areas.
9. This heater is not designed as a primary heat source.
10. Always plug heaters directly into a wall outlet/ receptacle. Never use with an extension cord or
relocatable power tap (outlet/power strip). Always unplug heater when not in use.
11. Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fire or damage the heater.
Intended use:
applications. Use only with electrical wiring that is in good working order and that meets applicable codes
and ordinances. This heater must be plugged in to a 120V AC, 15 Amp. (or larger) circuit. Do not plug any
other appliance into the same circuit. If you have any questions whether your wiring is adequate, consult a
qualified electrician. Risk of fire, overheating, malfunction, property damage, injury or even death may result
if not adhered to.
Use your heater-fan only with a working smoke detector located in the vicinity of this appliance.
While using your heater/fan, you should follow the IMPORTANT INSTRUCTIONS listed below. As part of
those instructions, we have used the word WARNING to indicate the level of hazard: WARNING indicates a
hazard which, if not avoided, could result in injury or death.
14. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft
surfaces like a bed, where openings may become blocked.

4
Electric Utility Heater
SAVE THESE INSTRUCTIONS.
WARNING: HOT SURFACES
Do not touch body of heater when in use. This heater is hot when in use; to avoid burns, do not
let bare skin touch hot surfaces. If provided, use handles when moving this heater.
WARNING: SHOCK HAZARD
Use your heater only in dry environments. This heater is not intended for use in a bath room,
laundry area, or similar locations, or near sinks, washing machines, swimming pools or other
sources of water. Never locate heater where it may fall into a bathtub or other water container.
Do not use heater outdoors. Do not use in damp environments such as flooded basements.
WARNING: ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug. Use with adequate electrical system that is up to code.
The supply cord has a polarized plug. As a safety feature this plug will fit in a polarized outlet
only one way. To prevent electric shock, match wide blade of plug to wide slot, fully insert plug.
If the plug does not fit contact a qualified electrician.
Do not operate any heater with a damaged cord or plug or after heater malfunctions, has been
dropped or damaged in any manner. Do not operate heater with a broken heating element or
ceramic cone, or any visual imperfections.
PET OWNERS NOTE :
the initial use of many appliances. Although these fumes are not harmful to humans, it is
recommended that this heater not be used a round birds and small pets during its initial use
WARNING: FIRE HAZARD
This heater has hot and arcing or sparking parts inside. Do not use near combustible materials
or flammable gases or sources of heat. DO NOT USE in areas where gasoline, paint or
flammable materials are used or stored. Keep combustible materials such as furniture, pillows,
bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the heater and
keep them away from the sides and rear. To prevent a possible fire, do not block air intakes or
exhaust in any manner.
Do not use on soft surfaces, like a bed, where openings may become blocked. Do not insert or
allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric
shock, fire, or damage the heater.
15. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or
flammable liquids are used or stored.
16. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock or injury to persons or property.
17. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safely. Children should
be supervised to ensure that they do not play with the appliance.

5
Electric Utility Heater
NOTE: To prevent overloading a circuit, do not plug the heater into a circuit that is servicing other
electrical appliances.
1. Power Indicator Light
2. Caution Indicator Light
3. Power Control Dials
4. Thermostat Dial
3
1 2
4
Heater Operation: Always operate the heater in the upright position following all instructions and
recommendations listed in this manual.
Heater Location: Place the heater in the area of the room that is coldest.
Heater Connection: Plug heater directly into a functional 120 volt A.C., 60 Hz wall outlet. Be sure plug fits
tightly in outlet. A loose connection may cause overheating and damage to the plug or heater.
Operating Instructions
Power/Caution Lights: This heater is equipped with Power and Caution Lights. The power light will
illuminate when the unit is plugged in. The Caution Light will illuminate when the unit overheats. When
located in this manual.
Turning Heater On:
LOW (I) or HIGH (II) setting. Then rotate the thermostat control clockwise to the HIGH THERMOSTAT position
as described below. (During the heaters initial use, you may experience a slight odour or smoke. This is
minutes of use.)
Power Control Dial: This heater has two heat settings: High ( II )and Low ( I ). Use the higher setting
(1,500 watt) to raise the room temperature quickly. When the desired temperature is reached use the
Setting Thermostat: After heater has been turned on and the room has reached the desired temperature,
“click”). By leaving the thermostat at this setting it will automatically maintain this temperature. To lower
temperature, rotate the knob further counter-clockwise (towards the LOW position (-)). To raise the
temperature, rotate the thermostat knob clockwise (towards the HIGH position(+) ).
To Operate Fan Only:
clockwise so the fan will run continuously.
Turn the center dial to the OFF position before unplugging or plugging in the heater. Heater
should be unplugged when not in use.
Control Panel
power control dials
Low setting. It is
power control dials ( )

6
Electric Utility Heater
CAUTION: Before cleaning the heater, be sure to disconnect power cord and allow the heater
to cool completely.
The power indicator light, located near the control panel, lights whenever the heater or fan plugged in.
The heater is equipped with an automatic overheat protection device located inside the body of the
heater. If the heater grille is obstructed, or if the heater gets too hot for any reason, the automatic
overheat protection device will turn the heater o. To reset the heater, simply turn power o and unplug
the heater for 10 minutes until it cools down and you may plug in and restart the heater. Be sure that the
heater is on a smooth level surface with no obstructions.
Care and Maintenance
Cleaning: Clean the outside surface with a clean damp cloth. Do not use harsh chemical or abrasive
cleaners. DO NOT IMMERSE THE HEATER IN WATER. Allow heater to dry completely before use.
Warranty
Your Thermosphere heater has warranty against defects in materials and workmanship for a period of
one (1) year from the date of original purchase. Please keep your proof of purchase (receipt) for any
warranty claims. Warranty does not cover wear and tear, and damages arisen from misuse or use not in
accordance with the product instructions.
Important Safety Features
Repair: DO NOT OPERATE THE HEATER WITHOUT THE GRILLE IN PLACE. DO NOT USE THE
HEATER IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
Storage: Keep original carton for storage of the heater. Coil and tie the power cord to avoid damage
during storage.