THOMSON SPEEDTOUCH 190 Safety guide

SpeedTouch™190
SIP Gateway
Setup and User’s Guide
Release R1.0

SpeedTouch™
190
Setup and User’s Guide
Release R1.0

Status v1.0
Reference E-DOC-CTC-20040401-0004
Short Title Setup and User’s Guide ST190 R1.0
Copyright © 2004 THOMSON. All rights reserved. Passing on, and copying of this document, use and
communication of its contents is not permitted without written authorization from
THOMSON. The content of this document is furnished for informational use only, may be
subject to change without notice, and should not be construed as a commitment by
THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies
that may appear in this document.

E-DOC-CTC-20040401-0004 v1.0 3
Contents
1 SpeedTouch™190 Installation ...................................... 5
1.1 Getting acquainted with the SpeedTouch™190............................................... 6
1.2 Setting Up the SpeedTouch™190...................................................................... 8
2 SpeedTouch™190 Web Interface ................................ 9
3 SpeedTouch™190 Calling Services ............................ 13

E-DOC-CTC-20040401-0004 v1.0
4

1 SpeedTouch™190 Installation
E-DOC-CTC-20040401-0004 v1.0 5
1 SpeedTouch™190 Installation
Introduction Thank you for purchasing the SpeedTouch™190 SIP gateway.
The SpeedTouch™190 SIP analog telephone adapter allows regular phones, fax or
modems to call a compatible peer SIP User over a broadband Internet connection.
Contents This Setup and User’s Guide will assist you in getting acquainted with the Speed-
Touch™190 SIP Gateway and will learn you how to make calls with your regular phone
using the Session Initiation Protocol (SIP).
Safety Instructions Before connecting the SpeedTouch™190, please carefully read the SpeedTouch™190
Quick Installation Guide, and the Safety Instructions and Regulatory Information
booklet.
Updates THOMSON continuously develops new solutions, but is also committed to improve its
existing products.
For more information on THOMSON’s latest technological innovations, documents and
software releases, please visit the SpeedTouch™ web site at:
http://www.speedtouch.com

1 SpeedTouch™190 Installation
E-DOC-CTC-20040401-0004 v1.0
6
1.1 Getting acquainted with the SpeedTouch™190
Package Checklist The SpeedTouch™190 package includes:
•SpeedTouch™190 SIP Gateway
•Ethernet cable
•Telephone cable
•Power adapter
•Quick Installation Guide
•Safety Instructions and Regulatory Information booklet.
Please inform your product dealer if there are any incorrect, missing, or damaged parts.
If possible, retain the carton, including the original packing materials in case there is a
need to return it.
Front panel layout
Front panel LEDs The SpeedTouch™190 is equipped with five LEDs on its front panel, indicating the state
of the device during normal operation:
Indicator Description
Name Color State
Power Green On Power On, normal operation
Off Power Off
VOIP Green On Registration successful to the SIP
server
Off Registration failed to the SIP server
LAN Green On Ethernet connectivity to the local
network
Off No Ethernet connectivity to the local
network

1 SpeedTouch™190 Installation
E-DOC-CTC-20040401-0004 v1.0 7
Back panel layout
WAN Green On Ethernet connectivity to the Internet
Gateway Device
Off No Ethernet connectivity to the
Internet Gateway Device
TEL Green On Phone off hook
Off Phone on hook
Indicator Description
Name Color State
A TEL port D Recessed Reset button
B WAN port E Power inlet
CLANport
A B D EC

1 SpeedTouch™190 Installation
E-DOC-CTC-20040401-0004 v1.0
8
1.2 Setting Up the SpeedTouch™190
Connect the VOIP line Plug the telephone cable (RJ11) provided into the SpeedTouch™190’s VOIP socket. Plug
the other end into your telephone’s RJ11 line socket.
Connect the LAN line Use an Ethernet cable to wire the SpeedTouch™190 LAN port to your PC’s Ethernet
card.
Connect the WAN line Use the Ethernet cable provided to wire the SpeedTouch™190 WAN port to your
Internet Gateway Device.
Connect the power
supply
Always check first whether the power supply adapter provided is suitable for the local
power specifications. Contact your product dealer in case of any doubt.
The power inlet on the SpeedTouch™190 is marked “12V AC”.
Plug the adapter’s coaxial jack into the SpeedTouch™190’s power inlet and plug the
power supply into a power socket outlet.
The SpeedTouch™190 is ready for service as soon as the Power LED on the front panel
is constantly lit green.