JPEG CD
EN
37
On- screen display for JPEG CD
File mode
1. In the JPEG mode window, use UP/DOWN to select a
directory, and the OK button on the remote to enter differ-
ent directories. You can use the LEFT button to go up one
layer in the directory.
2. Use UP/DOWN on the
remote to select the file
you wish to view.
3. Press the OK button to select the file, then press PLAY to
start viewing.
4. When viewing the
image, you can press the
PR+ or PR- button to skip
to next / previous image.
Zooming / rotating the image
1. In JPEG file mode, when you are viewing an image, you
can rotate the image by pressing ANGLE. (not working in
ZOOM mode.)
2. If you want to zoom in the image to full screen mode,
just press ZOOM.
4. In ZOOM mode, you can pan the screen at any direction
by pressing the corresponding navigation key.
5. To return to normal mode,
press ZOOM again.
Note:
The zoom function will not
be available if your image
pixels count is too low.
Slide show mode
1. In JPEG mode, Press PLAY/PAUSE on the main unit or
PLAY on the remote control to start the Slide show.
Pictures will be shown on screen for a while and fade, play-
back will stop until all the files are played.
2. You can pause viewing by pressing PAUSE, or press PLAY
to resume.
3. Press STOP to go back to navigation mode.
Playmode
In JPEG mode, you can select NORMAL / FAST / SLOW in the
playmode selection field to change the playback speed.
