Radio
EN
41
Radio
40
Manual preset
1. Tune to a radio station (see "Manual tuning" for details)
2. Press MENU on the remote control. "PRESET" will
appear on the display.
3. While the word "PROG" is still flashing, input your
desired preset number (1-40) using the UP/DOWN on the
remote control, then press OK again to store it.
Retrieving preset stations
1. Press SOURCE on the unit or TUNER on the remote
control to enter the tuner mode.
2. Press PRESET + or PRESET - on the unit or PR+ or PR -
on the remote control to search up or down the preset sta-
tions.
Operating the Radio
The receiver has a built-in tuner that allows for FM radio
function.
Manual tuning
1. Connect the FM antenna accordingly.
2. Press SOURCE on the front of the unit until the tuner
mode is selected. You may also directly press TUNER on the
remote control.
3. When the FM station broadcasts Stereo sound, ST is dis-
played.
4. Tune the a station by pressing TUNER + or TUNER - on
the remote control repeatedly until the desired station is
found.
Alternatively, you can press and hold the same button for
about one second to activate the automatic search func-
tion. In this mode the receiver will automatically tune fre-
quencies until it finds a station.
5. Repeat steps 4 to tune to another radio station.
Storing radio stations:
The receiver can store up to 40 radio stations in memory.
You can enter every single radio station yourself or the
receiver can store all available radio stations automatically
in an ascending order.
Note:
If there is interference, modify the loca-
tion of the antenna until the optimal sound
is heard. TV and other electronic devices
could be the cause of interferences so try to position the
antenna away from them.
