THUNDER TIGER RAPTOR 90 CLASS RC HELI User manual

6
WARNING
WARNING
WARNING
WARNING
BUILDING HINT

7
MAIN FRAME ASSEMBLY
1
For the kit, parts are bagged according to each major assembly and are labeled "Bag A, Bag
B, etc." The heading for each assembly indicates which bag to open. As a good practice,
only open up the bag that you need for the particular assembly. Check the parts in that bag
against the parts list shown for each assembly as well as each sub-assembly to make sure
there are no missing parts. To prevent losing small hardware, please empty the small nuts
and bolts and parts into small plastic trays on your work table. At the end of each major
assembly, there should be no left over parts.

13
No. Material No. Description Qty.
1 BK0667 Servo Frame 1
2 HSE3-12B M3x12 Self-Tapping Screw 6
3 1-3 Main Frame Assembly 1
Installation of Servo Frame
1-4
(1)
(2)
(3)
BAG C
Install the one-piece servo frame using six self-tapping screws.
Do not use Loctite when attaching self-tapping screws to plastic
parts. Loctite is only for threading metal into metal parts.

15
1-5-1 Aileron Lever Subassembly
1-5-2 Elevator Parallel Lever Subassembly
1-5-3 Elevator Control Lever Subassembly
No. Material No. Description Qty.
1 HMJ2-10N M2x10 Self-Tapping Screw 2
2 HMV840ZZ d4xD8x3 BRG 2
3 BK0340 Aileron Control Arm 1
4 BK0075 Link Ball 4.8 2
No. Material No. Description Qty.
1 HMJ2-10N M2x10 Self-Tapping Screw 2
2 HMV840ZZ d4xD8x3 BRG 2
3 BK0340 Aileron Control Arm 1
4 BK0075 Link Ball 4.8 2
No. Material No. Description Qty.
1 HMJ2-10N M2x10 Self-Tapping Screw 1
2 BK0337 Elevator Arm Parallel Lever 1
3 BK0075 Link Ball 4.8 1
No. Material No. Description Qty.
1 HMJ2-14N M2x14 Self-Tapping Screw 1
2 HMV840ZZ d4xD8x3 BRG 2
3 BK0338 Elevator Control Lever 1
4 BK0075 Link Ball 4.8 2
(L) (R)
Add a tiny drop of thick CA glue at the tip of the M2x10
self-tapping screw (No. 1) before screwing it into the
Aileron Levers.
(2)
(1)
(4)
(3)
(1)
(4)
(2)
(3)
(2)
(3)
(1)
(1)
(4)
(2)
(3)
Add CA glue Add CA glue
Add CA glue
Add CA glue

19
ROTOR HEAD ASSEMBLY
2