TIE 19-90026 User manual
Article: 19-90026
USER MANUAL
The Tie Studio Broadcast Microphone is a highly portable
condenser microphone complete with a desktop stand for
broadcasting applications. The omnidirectional condenser
capsule will pick up sound from all around the microphone,
making it ideal for podcasting, gaming, interviews, vocal
demos and more. The desktop stand that comes comple-
te with the microphone will allow you to conveniently use
your microphone at your computer desk, with the mic clip
The wide frequency range (50Hz – 16kHz) ensures you pick
up every nuance of the source material you are recording,
ideal for high-quality broadcast recordings and capturing
studio-grade vocals. The integrated rotary volume wheel
-
nally, the microphone comes complete with a 1.8m long
cable and a 3.5mm mini-jack plug so you can use your mic
straight away.
Features
Versatile condenser microphone
Desktop tripod stand
Omnidirectional pickup pattern
Ideal for podcasting, interviews, vocal demos, gaming and more
Integrated volume control
Complete with 1.8m cable and 3.5mm mini-jack plug
Specications
Frequency Response: 50Hz – 16kHz
Sensitivity: - 30 dB ± 3 dB
Operating Voltage: 1.5 V
Noise Level: > 36 dB
Directivity: Omnidirectional
COMPACT BROADCAST CONDENSER MICROPHONE
1. INSTALLATION
2
4. FOR 3.5MM AUDIO PLUG MICROPHONES
Brand: TIE® is a registrated trademark of sonic sales GmbH.
General Importeur worldwide: sonic sales GmbH, Rembrandtstr. 1-3, 33649 Bielefeld, Germany
Electronic waste:
Declaration of conformity: This product has been approved for getting the CE symbol.
Articlenumber:
After sales support: [email protected]
Designed and engineered in Germany. Made in China.
▶ www.tie-products.com
5. FAQ
Microphone sounds like it‘s really far away from me.
I am hearing lots of room noise.
This sounds like your on board mic is in use. Check both
system and software references to ensure that microphone
is the default input device.
Do I need any special software to use this microphone?
Do I need any driver?
Technically, no. Depending on your application, your OS
microphone.
My microphone is plugged in, but I am not able to see
or hear levels.
Things to check:
1.Is the microphone connected to correct 3.5mm
audio port?
If notebook comes with only one audio port, we may need
an adapter.
both the system and the software preferences?
Also make certain you have an adequate amount of
volume set.
Table of contents
Other TIE Microphone manuals
