Tigercat 234 Loader Introduction
v
An Operator's manual, Service manual and a Parts catalog are made available by Tigercat to assist the
dealer, customer and operator in becoming familiar with the features of the 234 Loaders
Serial numbers: 2342001 to 2342100.
The 234 Loader is designed for log processing, sorting, log transferring and loading.
,,,,The operator's manual will assist the operator with the techniques of proper and safe operation of the 234
Loader. There is also important information regarding the safe operation of the attachment. The service
manual contains safety and servicing procedures and a preventive maintenance schedule to ensure
optimum machine performance.
Section 1 in both the operator's manual and the service manual contains safety information that must be
followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed
where necessary, drawing attention to possible hazards when performing certain procedures.
Only trained personnel should be allowed to operate or work on the machine.
The information contained in this manual is current at time of printing. Improvements to the machine
are on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the
appropriate information.
The phrase “and up” appearing in this manual after the serial number implies that the related information
is current for any machine serial number HIGHER than the serial number preceding the “and up”.
Tigercat reserves the right to make changes to the machine after this manual release date that may not
immediately appear in this manual.
Every effort is made to send out updates on a regular basis. If the machine in question was built after the
release date of this manual and there is a discrepancy, call Tigercat service department. The release date
appears on the rst page.
The Company reserves the right to change information contained herein at any time without prior notice.
Tigercat Industries Inc.
INTRODUCTION
Tigercat 234 Loader