TIS ES-10F-CM Safety guide

Energy Servant 10-Function Sensor is a ceiling
sensor with an elegant design that includes a PIR
motion sensor, light harvest sensor, relay outputs,
digital input, temperature sensor, infrared emitter,
and 32 logic and timer lines with great capabilities
to ensure the most efcient energy use and home
theater appliances control by IR.
PRODUCT INFORMATION
6 58921 79865 2
BARCODE (UPC-A)
PRODUCT SPECIFICATIONS
PIR, Lux and Dry inputs
PIR motion sensor Dual element pyro-electric ceramic
Digital input. Open / Close 2 Channels
Length of connected wire to DI < 350 meter
Light intensity sensor 0 – 8000 Lux meter
Temperature sensor
accuracy +/- 0.3 C
Operating Range -40°C – 85°C
Respond Time 5-30 Seconds
TIS Bus
Number of devices on 1 line Max. 64
Bus voltage 12-32 V DC
Current consumption <15 mA / 24 V DC
PIR Detection PIR range 4-6 meters (installation height 2.6 - 3 meters)
PIR detection angle 110° from the celling down
Operating and display elements
Programming button For assignment of the physical address
Indicator LED Blue or Red LED (optional)
TIS bus TIS Protocol maessages and commands
Functions
Logic/ Timers 32 Timers and Logic conditions
IR Code memory / Flags 250 IR code memory & flags
Security Function Away, Night, Day, fire alarm setting
IR receiver 8 buttons function
Weight Without packaging 0.06 KG
Dimensions Width ×length × height 92mm ×39 mm ×92mm
Housing
Materials ABS anti fire / PC anti fire
Casing color Gray White
Base color Black
IR window cover Transparent White
IP rating IP 20
Temperature range
Operation -10…60°C
Storage -20…50°C
Transport -25…75°C
Air humidity <85% non-condensing
ENERGY SERVANT
10 FUNCTIONS CONTROLLER
INSTALLATION MANUAL
Model: ES-10F-CM

2
INSTALLATION MANUAL
Model: ES-10F-CM
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
www.tiscontrol.com
ENERGY SERVANT 10 FUNCTIONS CONTROLLER
Mounting Location
Install in a dry, indoor area with a suitable
temperature and humidity range.
Data Cable
Use screened stranded RS485 data cable
with four twisted pairs. Congure devices in
a “Daisy Chain.”
Do not cut or terminate live data cables.
Warranty
There is a two-year warranty provided
by law. The hologram warranty seal and
product serial number are available on
each device.
Read Instructions
We recommend that you read this
Instruction Manual before installation.
Safety instructions
Electrical equipment should only be
installed and tted by electrically skilled
persons.
Failure to follow the instructions may cause
damage to the device and other hazards.
These instructions are an integral part of
the product and must remain with the end
customer.
Programming
Advanced programming requires
knowledge of the TIS Device Search
software and instruction in the TIS
advanced training courses.
Simple Installation
You can use 2 screws to install this sensor
on the ceiling

3
INSTALLATION MANUAL
Model: ES-10F-CM
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
www.tiscontrol.com
ENERGY SERVANT 10 FUNCTIONS CONTROLLER
INSTALLATION STEPS
2Rotate the sensor cover to open it.
3Remove the PCB from the holding pins.
4Open the wire holes, and insert the TIS-
BUS cable and other 3rd-party digital input
(dry contact) cable in the sensor base.
For more information on how different
types of 3rd-party sensors connect to
this module, please refer to the sensor’s
connection diagram le.
1Turn off TIS power supply.
WARNING! HIGH VOLTAGE

4
INSTALLATION MANUAL
Model: ES-10F-CM
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
www.tiscontrol.com
ENERGY SERVANT 10 FUNCTIONS CONTROLLER
INSTALLATION STEPS
5Mount the sensor base on the ceiling with
2 screws.
6Connect the cables to the 4-pin terminals
and Insert the terminals in the board.
Make sure to connect the BUS cable to
the green connector and the dry contact
cable to the red connector.
To the TIS BUS Network
Cat5e
To the 3
rd Party Device
Cat5e
7Secure the board inside the sensor base
using the base pins.

5
INSTALLATION MANUAL
Model: ES-10F-CM
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
www.tiscontrol.com
ENERGY SERVANT 10 FUNCTIONS CONTROLLER
INSTALLATION STEPS
8
9
10
Install the extra 3 screws (optional).
Close the cover of the sensor.
Turn the power supply ON. The sensor
LED should turn on.

6
INSTALLATION MANUAL
Model: ES-10F-CM
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
www.tiscontrol.com
ENERGY SERVANT 10 FUNCTIONS CONTROLLER
TROUBLESHOOTING
The sensor’s LED blinks rapidly.
Reason: The sensor address conicts with
another device in the TIS network. You need
to press and hold on the sensor PCB PRG
button for 6 seconds so that the sensor can
get a new address.
The sensor’s LEDs do not
turn ON, and the device is not
powered.
Reason: The TIS 24V power supply is not
connected to the TIS-BUS.
The sensor fails to control the
device channels.
Reason 1: The TIS-BUS connection has a
problem, or the wire has a short.
Reason 2: The programming address is
faulty.
The sensor LED is always off,
but it works ne. Reason: LED is disabled in the software.
The sensor’s sensitivity is not
strong.
Reason 1: The sensitivity level is reduced in
the software.
Reason 2: The ceiling where the sensor is
installed is not high enough.