Titan Fitness HPND1 User manual

-
MPN: HPND1-HPND2
SKU: 400593
UPC: 719318387207

2
KEY #
BOX
DESCRIPTION
QTY
(1)
1
FRONT FRAME
x2
(2)
1
REAR FRAME
x2
(3)
1
LOWER CROSS FRAME
x1
(4)
2
UPPER CROSS FRAME
x1
(5)
1
BASE FRAME
x2
(6)
2
PENDULUM
x1
(7)
2
PLATE BAR HOLDER
x2

3
(8)
1
HANDLE BAR FRAME
x2
(9)
2
ADJUSTABLE HANDLE BAR
x2
(10)
2
PIN ASSEMBLY
x2
(11)
2
LOGO PLATE
x2
(12)
2
SUPPORT PLATE
x8
(13)
2
CLIP Φ50*Φ5
x2
(14)
2
PIN SHAFT Φ11*Φ8*50
x2
(15)
2
CABLE Φ5.5*Φ1.6*360
x2
(16)
2
RING Φ1.5*31
x4
(17)
2
RUBBER FOOT
x4
(18)
2
PAD
x1
(19)
2
NON-SLIP STICKER
x2
(20)
2
SWING BAND
x1
(21)
2
RUBBER BUMPER Φ77*Φ47.5*13
x2
(22)
2
FRONT HANDLE BAR FRAME
x2
(23)
2
END CAP Φ50*2.5
x2
(24)
2
BEARING UCP205
x2
(25)
1
FLAT WASHER Φ11*Φ20*2
x24
(26)
1
BIG WASHER Φ13*Φ37*3
x4
(27)
1
FLAT WASHER Φ13.5*Φ24*2.5
x48
(28)
1
NUT M10
x10
(29)
1
NUT M12
x24
(30)
1
HEX BOLT M10*40
x4
(31)
1
HEX BOLT M10*75
x8
(32)
1
HEX BOLT M10*85
x2
(33)
1
HEX BOLT M12*100
x4
(34)
1
HEX BOLT M12*105
x24
(35)
1
HEX BOLT M8*15
x8
HPND1 = BOX 1
HPND2 = BOX 2

4
1. Assemble BASE FRAME (5) and LOWER CROSS FRAME (3) using BIG WASHER
Φ13*Φ37*3 (26), FLAT WASHER Φ13.5*Φ24*2.5 (27), NUT M12 (29), and HEX
BOLT M10*40 (30).
Please do not tighten all bolts.

5
2. Assemble FRONT FRAME (1), REAR FRAME (2), BASE FRAME (5), and SUPPORT
PLATE (12) using FLAT WASHER Φ13.5*Φ24*2.5 (27), NUT M12 (29), and HEX
BOLT M12*105 (34).
Please do not tighten all bolts.

6
3. Assemble FRONT FRAME (1), REAR FRAME (2), UPPER CROSS FRAME (4), and
LOGO PLATE (11) using FLAT WASHER Φ13.5*Φ24*2.5 (27), NUT M12 (29), and
HEX BOLT M12*105 (34).
Adjust the machine and tighten all bolts.

7
4. Assemble UPPER CROSS FRAME (4) and HANDLE BAR FRAME (8) using FLAT
WASHER Φ11*Φ20*2 (25), NUT M10 (28), and HEX BOLT M10*75 (3).
Install ADJUSTABLE HANDLE BAR (9) to HANDLE BAR FRAME (8) using PIN
ASSEMBLY (10).

8
5. Put BEARING UCP205 (24) on PENDULUM (6), and then assemble PENDULUM
(6), UPPER CROSS FRAME (4), and BEARING UCP205 (24) using FLAT WASHER
Φ11*Φ20*2 (25), NUT M10 (28), and HEX BOLT M10*40 (30) as shown.
Please tighten the bolt.

9
6. Assemble PENDULUM (6) and PLATE BAR HOLDER (7) using FLAT WASHER
Φ11*Φ20*2 (25), NUT M10 (28), and HEX BOLT M10*85 (32), and then put
SWING BAND (20) on PLATE BAR HOLDER (7) using CLIP Φ50*Φ5 (11) as
shown.

10
7. Install PAD (12) to UPPER CROSS FRAME (4) using FLAT WASHER Φ11*Φ20*2
(25) and HEX BOLT M10*75 (31).
Please tighten all bolts.

11
This concludes the assembly of
your product.
Make sure to tighten all nut-
and-bolt combinations before
use.
Enjoy!
NEED HELP?
CONTACT US FIRST.
1 [phone]
[e-mail] /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)