Titan Fitness V3 User manual

INCLINE BENCH V3
INBENCHv3
401490
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
PARTS DIAGRAM / EXPLODED VIEW

3
PARTS DIAGRAM
HARDWARE LIST

4
PARTS LIST
KEY
DESCRIPTION
QTY
(A)
MAIN FRAME
1
(B)
REAR STABILIZER
1
(C)
FRONT STABILIZER
1
(D)
BACK FRAME
1
(E)
SEAT FRAME
1
(F)
BACK PIVOT BRACKET
1
(G)
SEAT PIVOT BRACKET
1
(H)
BACK PAD
1
(I)
SEAT PAD
1
(J)
METAL BUSH #10.5
4
(K)
POP PIN
2
(L)
50 MM SQUARE INNER CAP
4
(M)
25*130 HANDLE
1
(N)
M6 SMALL BUMPER
1
(O)
M8 LARGE BUMPER
1
(P)
ROUND DOME
2
(Q)
WHEEL
2
(R)
RUBBER FEET
4
(1)
M10*100MM BOLT
2
(2)
M8*65MM BOLT
4
(3)
M8*15MM BOLT
16
(4)
M6*40MM BOLT
2
(5)
M10 WASHER
4
(6)
M8 WASHER
24
(7)
M6 WASHER
4
(8)
M10 NYLON LOCKNUT
2
(9)
M8 NYLON LOCKNUT
4
(10)
M6 NYLON LOCKNUT
2

5
ASSEMBLY INSTRUCTIONS
STEP 1
1. Attach (B) REAR STABILIZER
to (A)MAIN FRAME using
two (2)M*65 BOLTS, four
(6)M8 WASHERS, and two
(9)M8 NYLON LOCKNUTS.
2. Attach (C)FRONT
STABILIZER to (A)MAIN
FRAME using two (2)M*65
BOLTS, four (6)M8
WASHERS, and two (9)M8
NYLON LOCKNUTS.
3. Screw in (O) M8 LARGE
BUMPER to rear of
(A)MAIN FRAME. Screw in
(N)M6 SMALL BUMPER to
front of (A) MAIN FRAME.
You will adjust once height
of the Bumper after Back and Seat Frames are installed in the Step.
STEP 2
1. Attach (D)BACK Frame to
(A)MAIN FRAME with one
(1)M10*100 BOLT, two
(5)M10 WASHERS, and one
(8)M10NYLON LOCKNUTS.
2. Attach (E)SEAT FRAME to
(A)MAIN FRAME with one
(1)M10*100 BOLT, two
(5)M10 WASHERS, and one
(8) M10 NYLON LOCKNUTS.
3. Screw (O) M8 LARGE
BUMPER up until touches
(D) BACK FRAME.
4. Screw (N) M6 SMALL
BUMPER up until touches
(E) SEAT FRAME.

6
ASSEMBLY INSTRUCTIONS
STEP 3
1. Screw 2 (K) POP PINS into
(A)MAIN FRAME.
2. Raise (D)BACK FRAME to
vertical upright position.
3. Insert (F) BACKPIVOT
BRACKET into the pop pin
bracket on the main
frame. Lock (K) POP PIN in
fourth hole of (F)BACK
PIVOT BRACKET. 4. Lower
(D) BACK FRAME to(F)
BACK PIVOT BRACKET and
screw 4 (3)M8*15 BOLTS
and 4 (6) M8 WASHER into
(F)BACK PIVOT BRACKET.
STEP 4
1. Raise (D) BACK FRAME to
horizontal position.
2. Insert (G) SEAT PIVOT
BRACKET into the pop pin
bracket on main frame.
Lock (K) POP PIN into the
first hole of (E) SEAT
FRAME.
3. Lower (G) SEAT PIVOT
BRACKET and screw two
(3) M8*15 BOLTS and two
(6) M8 WASHER into the
side of (F) BACK PIVOT
BRACKET.
4. Release (K)POP PIN and raise (E) SEAT FRAME to vertical position.
5. Screw two (3) M8*15 BOLTS and two (6) M8 WASHER into the bottom of (F) BACK PIVOT
BRACKET.

7
ASSEMBLY INSTRUCTIONS
STEP 5
1. Attach (I) SEAT PAD to (E)
SEAT FRAME with four (3)
M8*15 BOLTS and four
(6) M8 WASHERS.
STEP 6
1. Attach (F) BACK PAD to
(D) BACKREST FRAME
with four (3) M8*15
BOLTS and four (6) M8
WASHERS.

8
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

9
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2023 Titan Brands