Titan Fitness NEMESIS CFNTLTNR210 User manual

NEMESISTM FUNCTIONAL TRAINER
CFNTLTNR210
401462
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
PARTS DIAGRAM / EXPLODED VIEW

3
KEY
BOX
DESCRIPTION
QTY
KEY
BOX
DESCRIPTION
QTY
(1)
1
BASE FRAME
1
(35)
1
RIGHT FRONT BASE
FRAME
1
(2)
1
MAIN FRAME
1
(41)
1
FRONT FIXING PLATE
1
(3)
1
UPRIGHT FRAME
1
(47)
1
WEIGHT PLATE
19
(14)
1
RIGHT COVER
1
(62)
1
HANDLE
2
(34)
1
LEFT FRONT BASE
FRAME
1
ASSEMBLY INSTRUCTIONS
STEP 1
A. Assemble the Left Front Base Frame (34) on Base Frame (1), using Flat Washer
Φ11*Φ20*2 (86), Spring Washer Φ10 (90), Nut M10(93), Hex Bolt M10*105 (71) and Hex
Bolt M10*20 (101).
B. Assemble the Right Front Base Frame (35) on Base Frame (1), using Flat Washer
Φ11*Φ20*2 (86), Spring Washer Φ10 (90), Nut M10 (93), Hex Bolt M10*105 (71) and Hex
Bolt M10*20 (101).
ADJUST THE WHOLE BASE FRAME SMOOTHLY, THEN TIGHTEN ALL THE BOLTS.

4
ASSEMBLY INSTRUCTIONS
STEP 2
A. Remove the Bolts, Washer and Nut form the Main Frame (2).
B. Connect Main Frame (2) and Base Frame (1), using Flat Washer Φ11*Φ20*2 (86), Spring
Washer Φ10 (90), and Hex Bolt M10*25 (78). And then reinstall the bolt that was
removed earlier.
DON’T TIGHTEN ALL THE BOLTS.

5
ASSEMBLY INSTRUCTIONS
STEP 3
A. Connect Upright Frame (3) and Main Frame (2), using Flat Washer Φ11*Φ20*2 (86),
Spring Washer Φ10 (90), Nut M10 (93), Hex Bolt M10*30 (77) and Hex Bolt M10*25 (78).
TIGHTEN ALL THE BOLTS.

6
ASSEMBLY INSTRUCTIONS
STEP 4
Remove the Guide Rod Bushing (45) and Top Weight Stack (48), then fixing the Guide Rod on
Rear Support (2).
Tilt the Guide Rod outward, then install the Weight Stack on the Guide Rod, Reinstall the Top
Weight Stack (48) and Guide Rod Bushing (45).

7
ASSEMBLY INSTRUCTIONS
STEP 5
Connect Right Cover (14) with logo at top to the inside of the Main Frame (2), using Flat Washer
Φ8.4*Φ24*2 (97), Spring Washer Φ8 (91), Rubber Bumper (61) and Hex Bolt M8*65 (83).
TIGHTEN ALL THE BOLTS AND ADJUST MACHINE SMOOTHLY BEFORE USE.
MAIN FRAME
RIGHT COVER

8
FULL PARTS DIAGRAM / EXPLODED VIEW

9
FULL PARTS DIAGRAM / EXPLODED VIEW
(1)
1
BASE FRAME
1
(52)
1
Φ19 METAL BUSHING
2
(2)
1
MAIN FRAME
1
(53)
1
RUBBER PAD
2
(3)
1
UPRIGHT FRAME
1
(54)
1
BUFFERED WASHER
1
(4)
1
SLIDING FRAME
1
(55)
2
RUBBER BAFFLE
2
(5)
1
ADJUSTABLE FRAME
2
(56)
2
STOPPER 30*70*20
1
(6)
1
SWING ARM FRAME
2
(57)
2
END CAP 40*80*2.5
1
(7)
1
PULLEY FRAME
2
(58)
1
FLOOR MAT
4
(8)
1
SWING ARM FRONT
CONNECTING FRAME
1
(59)
1
TAPERED RUBBER BUMPER
4
(9)
1
DOUBLE PULLEY BRACKET
1
(60)
1
PLASTIC SLEEVE
8
(10)
1
TOP PULLEY FRAME
1
(61)
1
RUBBER BUMPER
3
(11)
1
LOWER LIMITED FRAME
1
(62)
1
HANDLE
2
(12)
1
COUNTER WEIGHT
1
(63)
1
MAGNETIC PIN
1
(13)
1
ADJUSTABLE TUBE
1
(64)
1
SAFETY HOOK Ф8
2
(14)
1
RIGHT COVER
1
(65)
1
O-RING
2
(15)
1
LEFT COVER
1
(66)
1
BEARING 61901ZZ
8
(16)
1
FIXING PLATE
2
(67)
1
BEARING 6007ZZ
4
(17)
1
FRONT FIXING PLATE
1
(68)
1
BEARING 6005ZZ
4
(18)
1
LEFT LOGO PLATE
1
(69)
1
HEX BOLT M10*115
2
(19)
1
RIGHT LOGO PLATE
1
(70)
1
HEX BOLT M10*110
5
(20)
1
SIDE COVER PLATE
2
(71)
1
HEX BOLT M10*105
8
(21)
1
TOP PERMANENT SEAT
1
(72)
1
HEX BOLT M10*90
1
(22)
1
BASE PERMANENT SEAT
1
(73)
1
HEX BOLT M10*75
1
(23)
1
BEARING WASHER
2
(74)
1
HEX BOLT M10*70
2
(24)
1
GUIDE ROD
2
(75)
1
HEX BOLT M10*50
2
(25)
1
SPACER BUSHФ18*Ф10.2*44
4
(76)
1
HEX BOLT M10*45
10

10
(26)
1
Φ50 PULLEY
2
(77)
1
HEX BOLT M10*30
8
(27)
1
ROLLER
4
(78)
1
HEX BOLT M10*25
7
(28)
1
SPACER BUSH Ф12*Ф6*16
8
(79)
1
HEX BOLT M10*20
6
(29)
1
BEARING PULLEY
6
(80)
1
HEX BOLT M6*20
8
(30)
1
CABLE Ф5*10690
1
(81)
1
HEX BOLT M6*15
14
(31)
1
CABLE Ф5*1630
1
(82)
1
HEX BOLT M5*10
1
(32)
1
•DOUBLE THREADED SHAFT
4
(83)
1
PAN HEAD, HEX BOLT M8*65
3
(33)
1
LOWER FIXING FRAME
1
(84)
1
PAN HEAD, HEX BOLT M6*30
8
(34)
1
LEFT FRONT BASE FRAME
1
(85)
1
FLAT WASHER Φ13.5*Φ24*2.5
2
(35)
1
RIGHT FRONT BASE FRAME
1
(86)
1
FLAT WASHER Φ11*Φ20*2
96
(36)
1
SIDE CONNECTING FRAME
1
(87)
1
FLAT WASHER Φ8.4*Φ24*2
3
(37)
1
SUPPORT FRAME
2
(88)
1
FLAT WASHER Φ6.6*Φ12*1.6
34
(38)
1
SPLINT
4
(89)
1
SPRING WASHER Φ12
2
(39)
1
Φ115 PULLEY
1
(90)
1
SPRING WASHER Φ10
14
(40)
1
Φ95 PULLEY
12
(91)
1
SPRING WASHER Φ8
3
(41)
1
LONG BAR
1
(92)
1
SPRING WASHER Φ6
20
(42)
1
SELECTED SHAFT
1
(93)
1
NUT M10
48
(43)
1
PIN
2
(94)
1
NUT M6
14
(44)
1
BEARING WASHER
2
(95)
1
NUT M8
3
(45)
1
GUIDE ROD BUSHING
2
(96)
1
HEXAGON FLANGE NUT M12
1
(46)
1
PULLEY CASING
12
(97)
1
SCREW M6*4
2
(47)
1
WEIGHT PLATE
20
(98)
1
COUNTERSUNK HEAD SCREW
M5*10
8
(48)
1
TOP WEIGHT STACK
1
(99)
1
Φ25 CIRCLIP FOR SHAFT
2
(49)
1
PIN SHAFT
1
(100)
1
Φ35 CIRCLIP FOR SHAFT
2
(50)
1
SPRING Φ14*Φ1.5*55
1
(101)
1
PAN HEAD, HEX BOLT M10*20
4
(51)
1
HANDLEBAR
1

11
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

12
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2021 Titan Brands