Titan Fitness ASSTPULLDP User manual

PLATE-LOADED ASSISTED
PULL-UP AND DIP MACHINE
ASSTPULLDP
401482
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
PARTS DIAGRAM / EXPLODED VIEW

3
KEY BOX DESCRIPTION QTY
(1) 1 TOP CROSS FRAME 1
(2) 1 LOWER CROSS FRAME 1
(3) 1 RIGHT UPRIGHT FRAME 1
(4) 1 LIGHT UPRIGHT FRAME 1
(5) 1 REAR BASE FRAME 1
(6) 1 REAR CROSS FRAME 1
(7) 1 FRONT BASE FRAME 1
(8) 1 SLIDING FRAME 1
(9) 1 WEIGHT PLATE SUPPORTER 1
(10) 1 FIXING FRAME 1
(11) 1 GUIDE ROD 2
(12) 1 MAIN FRAME 1
(13) 1 WEIGHT PLATE HOLDER 2
(14) 1 SLIDING ROD 2
(15) 1 LEG CUSHION 1
(17) 1 CABLE Ф5*3180 1
(39) 1 RUBBER CUSHION Ф55*Ф25*25 4
(48) 1 HOOK Ф8*80 2

4
ASSEMBLY INSTRUCTIONS
STEP 1
1. CONNECT REAR BASE FRAME (5), REAR CROSS FRAME (6) and FRONT BASE FRAME (7),
using FLAT WASHER Φ11*Φ20*2 (60), NUT M10 (55), and HEX BOLT M10*95 (61).
2. Insert the HEX BOLT M10*70 (65) from the bottom of REAR BASE FRAME (5). Insert
the GUIDE ROD (11) through the WEIGHT PLATE SUPPORTER (9), and RUBBER
CUSHION (39) into the REAR CROSS FRAME (6) and MAIN FRAME (12), fixing by FLAT
WASHER Φ10.5*Φ30*2.5 (49), and HEX BOLT M10*25(50). The fixing MAIN FRAME
(12) and REAR BASE FRAME (5), using WASHER Φ11*Φ20*2 (60), NUT M10 (55), and
HEX BOLT M10*70 (65).
DON’T TIGHTEN THE BOLTS.

5
ASSEMBLY INSTRUCTIONS
STEP 2
1. Connect REAR CROSS FRAME (6) and FRONT BASE FRAME (7), using FLAT WASHER
Φ11*Φ20*2 (60), NUT M10(55), and HEX BOLT M10*95(61).
2. Connect RIGHT UPRIGHT FRAME (3), LEFT UPRIGHT FRAME (4) and FRONT BASE
FRAME (7), using FLAT WASHER Φ11*Φ20*2 (60), NUT M10(55), and HEX BOLT
M10*95 (61).
3. Connect RIGHT UPRIGHT FRAME (3), LEFT UPRIGHT FRAME (4) and TOP CROSS
FRAME (1), using FLAT WASHER Φ11*Φ20*2 (60), NUT M10 (55), and HEX BOLT
M10*70 (62).
4. Connect TOP CROSS FRAME (1) and MAIN FRAME (12), using FLAT WASHER
Φ11*Φ20*2 (60), NUT M10 (55), and HEX BOLT M10*95 (61).

6
ASSEMBLY INSTRUCTIONS
STEP 3
1. Insert the SLIDING ROD (14) through the SLIDING FRAME (8), and RUBBER CUSHION
(39) into FRONT BASE FRAME (7) and LOWER CROSS FRAME (2), fixing FLAT WASHER
Φ11*Φ20*2 (60), NUT M10(55), and HEX BOLT M10*95(61). Then fixing SLIDING ROD
(14) on the LOWER CROSS FRAME (2), using FLAT WASHER Φ10.5*Φ30*2.5 (49), and
HEX BOLT M10*25(50).

7
ASSEMBLY INSTRUCTIONS
STEP 4
1. Install the WEIGHT PLATE HOLDER (13) on WEIGHT PLATE SUPPORTER (9) as is
shown, using FLAT WASHER Φ11*Φ20*2 (60), NUT M10(55), and HEX BOLT M10*95
(61).

8
ASSEMBLY INSTRUCTIONS
STEP 5
1. Remove the NUT M10 (55) and PULLEY, after the cables assembly is installed,
reinstall the pulley and tighter the NUT M10(55). SAFETY HOOK (48) are attached to
both ends of the cables, then fixing on the SLIDING FRAME (8) and WEIGHT PLATE
SUPPORTER (9).

9
FULL PARTS LIST / EXPLODED VIEW

10
FULL PARTS LIST / EXPLODED VIEW
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 2 TOP CROSS FRAME 1 (37) 1&2 Φ25 END CAP 6
(2) 2 LOWER CROSS FRAME 1 (38) 1&2 Φ25 DECORATIVE RING 6
(3) 1 RIGHT UPRIGHT FRAME 1 (39) 1 BUFFERED WASHER
Φ55*Φ25*25
4
(4) 1 LIGHT UPRIGHT FRAME 1 (40) 3 SLIDING SLEEVE
Φ35.50*Φ26*39 4
(5) 2 REAR BASE FRAME 1 (41) 3 RUBBER BUMPER
Φ77*Φ47.5*13 2
(6) 2 REAR CROSS FRAME 1 (42) 3 END CAP Φ48*3 2
(7) 2 FRONT BASE FRAME 1 (43) 3 END CAP 50*50*3 4
(8) 3 SLIDING FRAME 1 (44) 1 Φ89 PULLEY 2
(9) 3 WEIGHT PLATE
SUPPORTER
1 (45) 1 PIPE SLEEVE 50*75 4
(10) 3 FIXING FRAME 1 (46) 1&2 ADJUST FOOT MAT 3
(11) 1 GUIDE ROD 2 (47) 2 END CAP Φ25*3 4
(12) 1 MAIN FRAME 1 (48) 2 SAFETY HOOK Φ8*80 2
(13) 3 WEIGHT PLATE HOLDER 2 (49) 2 FLAT WASHER
Φ10.5*Φ30*2.5
4
(14) 2 SLIDING ROD 2 (50) 2 PAN HEAD, HEX BOLT
M10*25
4
(15) 1 LEG CUSHION 1 (51) 1&2 HEX BOLT M10*15 2
(16) 1 END CAP Φ48 2 (52) 3 BEARING 6200ZZ 16
(17) 2 CABLE Φ5*3180 1 (53) 1 BEARING 61905ZZ 4
(18) 2 OUTER HANDLE GRIP 2 (54) 3 HEX BOLT M10*65 4
(19) 2 INNER HANDLE GRIP 2 (55) 1,2,3 NUT M10 28
(20) 1 HANDLE GRIP 2 (56) 1 Φ25 CIRCLIP FOR SHAFT 2
(21) 1 DIP BAR 2 (57) 3 HEX BOLT M6*35 8
(22) 1 FOOT MAT 2 (58) 3 FLAT NUT M6 8

11
(23) 3 SPACER BUSHING
Φ18*Φ10.2*9.5
8 (59) 3 NUT M6 8
(24) 3 SPACER BUSH
Ф21*Ф10.2*9.8
8 (60) 2 FLAT WASHER Φ11*Φ20*2 50
(25) 3 ADJUSTING SHAFT Φ10*86 4 (61) 2 HEX BOLT M10*95 14
(26) 3 ROTATING SHAFT
Φ12*89*M8
1 (62) 2 HEX BOLT M10*70 4
(27) 3 Φ25 WHEEL 8 (63) 1 HEX BOLT M10*90 2
(28) 3 END CAP 50*50*2.5 2 (64) 2 HEX BOLT M10*75 2
(29) 3 RUBBER CUSHION 2 (65) 2 CARRIAGE BOLT M10*70 2
(30) 3 Ф12 METAL SLEEVE 2 (66) 1&2 HEX BOLT M6*20 6
(31) 3 END CAP 30*60*2 3 (67) 1 COUNTERSUNK HEAD
SCREW M8*15 6
(32) 3 END CAP 38.1*12.7*2 1 (68) 2 HEX BOLT M10*50 4
(33) 2 END CAP 50*75*2 2 (69) 1&3 CROSS RECESS HEAD
SCREW M5*10
4
(34) 3 ADJUSTED SHAFT 1 (70) 3 FLAT WASHER Φ9*Φ24*2 2
(35) 3 KNOB Φ38*23*M8 1 (71) 3 PAN HEAD, HEX BOLT
M8*15
2
(36) 3 SPRING Φ14*Φ1*45 1

12
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

13
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2021 Titan Brands