Titan Fitness LEGEXTCRL User manual

OWNE R ’S MANUAL
MPN(s): LEGEXTCRL

2
P A R T S D I A G R A M / E X P L O D E D V I E W

3
KEY
DESCRIPTION
QTY
(1)
MAIN FRAME
x1
(2)
FRONT UPRIGHT FRAME
x1
(3)
REAR FOOT FRAME
x1
(4)
CONNECT FRAME
x1
(5)
BACK CUSHION FRAME
x1
(6)
SEAT CUSHION FRAME
x1
(7)
LEFT HANDLE FRAME
x1
(8)
RIGHT HANDLE FRAME
x1
(9)
WEIGHT PLATE RACK
x1
(10)
LEG SWING FRAME
x1
(11)
ROTARY RACK
x1
(12)
LEG FOAM RACK
x1
(13)
PRESS LEG FOAM RACK
x1
(14)
LONG PULL PIN
x1
(15)
PULL PIN ASSEMBLY
x1
(16)
DOUBLE END BOLT M10
x1
(17)
WEIGHT PLATE RETAINING BOLT
x1
(18)
SLEEVE
x1
(19)
LEG PLUG SLEEVE
x1
(20)
L BOLT
x1
(21)
38-25 COPPER SLEEVE
x2
(22)
FORCE SPRING
x1
(23)
SPRING
x1
(24)
LEG FOAM PLATE
x1
(25)
FOAM PLATE
x1
(26)
BEARING WASHER
x2
(27)
BACK CUSHION
x1
(28)
SEAT CUSHION
x1
(29)
BIG FOAM CUSHION
x2

4
(30)
F50 HORSESHOE SLEEVE
x4
(31)
HOLLOW SLEEV1
x2
(32)
HANDLE SLEEVE
x2
(33)
LIMITED SLEEVE
x1
(34)
KNOP
x1
(35)
BOX BUTTON
x1
(36)
WEIGHT PLATE CUSHION
x2
(37)
END CAP
x2
(38)
END CAP F40*2
x1
(39)
END CAP F50*2
x1
(40)
END CAP F50*3
x4
(41)
BEARING
x6
(42)
FLAT WASHER
x12
(43)
FLAT WASHER
x1
(44)
FLAT WASHER
x18
(45)
SPRING WASHER
x1
(46)
SPRING WASHER
x4
(47)
NUT M10
x12
(48)
HEX BOLT M10*25
x10
(49)
HEX BOLT M10*70
x8
(50)
HEX BOLT M10*75
x2
(51)
HEX HEAD BOLT
x2
(52)
HEAVY SPRING STRAIGHT PIN
x1

5
A S S E M B L Y I N S T R U C T I O N S
Step 1
Connect Main Frame (1), Front Upright Frame (2), Rear Foot Frame (3) and Connect
Frame (4), using Flat Washer (42), Flat Washer (44), Nut M10(47) and Hex BoltM10*70
(49).

6
Step 2
Fix Left Handle Frame (7), Right Handle Frame (8) on Main Frame (1), using Flat Washer
(44), Nut M10(47) and Hex BoltM10*75 (50)
Fix Weight Plate Retaining Bolt (17) on Front Upright Frame (2), using Flat Washer (42),
Spring Washer (46) and Hex BoltM10*25 (48)

7
Step 3
Plug Back Cushion Frame (5) into Main Frame (1), Using Hex Head Bolt (51).
Fix Seat Cushion Frame (6) on Main Frame (1), using Double end Bolt M10(16), Nut M10
(47).
Fix Seat Cushion Frame (6) on Main Frame (1), using L Bolt (20).

8
Step 4
Fix Bearing Washer (26) and Leg Foam Rack (12) on Leg Swing Frame (10), using Flat
Washer (42), Spring Washer (46), Hex Bolt M10*25(48).
Fix Bearing Washer (26) and Press Leg Foam Rack (13) on Front Upright Frame (2), using
Flat Washer (42), Spring Washer (46), Hex Bolt M10*25 (48).

9
Step 5
Fix Back Cushion (27) on Back Cushion Frame (5), using Flat Washer (44), Hex Bolt
M10*25(48).
Fix Seat Cushion (28) on Seat Cushion Frame (6), using Flat Washer (44), Hex Bolt
M10*25 (48).
Install Force Spring (22) on Weight Plate Rack (9).

10
This concludes the LEGEXTCRL Owner’s Manual.
If applicable to your product, make sure to tighten all
nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 [phone]
[e-mail]/www.titan.fitness
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)