Titan Fitness SMTHMACHKIT User manual

SMITH MACHINE
SMTHMACHKIT
401254
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
PARTS DIAGRAM / EXPLODED VIEW

3
KEY
DESCRIPTION
QTY
KEY
DESCRIPTION
QTY
(1)
MAIN FRAME –L
1
(22)
STRETCH CORDS HOLDER
4
(2)
MAIN FRAME –R
1
(23)
END CAP 45
6
(3)
TOP CROSS FRAME
2
24)
LONGER PLATE STORAGE
BAR
2
(4)
GUN RAKC
4
(25)
END CAP 38
22
(5)
GUIDE ROD
2
(26)
RUBBER BUMPER 77*44*13
6
(6)
SLIDING MECHANISM
ASSEMBLY –L
1
(27)
CABLE
2
(7)
SLIDING MECHANISM
ASSEMBLY –R
1
(28)
RUBBER END CAP
1
(8)
BARBELL
1
(29)
FLAT WASHER 11*20*2
30
(9)
SAFETY CATCH –R
1
(30)
FLAT WASHER 11*20*2
8
(10)
SAFETY CATCH –L
1
(31)
LOCK NBUT M10
2
(11)
BUSHING
4
(32)
LOCK NUT M12
8
(12)
RUBBER BUMPER
4
(33)
ALLEN BOLT M12*65
4
(13)
BUSHING
4
(34)
ALLEN BOLT M12*25
18
(14)
BUSHING
2
(35)
ALLEN BOLT M10*45
2
(15)
BEARING LM25
4
(36)
ALLEN BOLT M10*20
4
(16)
CLIP
4
(37)
ALLEN BOLT M8*15
10
(17)
BUSHING 36*25.5*15
2
(38)
WEIGHT ASSEMBLY
2
(18)
END CAP 40*80*2
2
(39)
END CAP
2
(19)
PULLEY 95
2
(40)
END CAP
2
(20)
FOOT MAT
4
(41)
ALLEN BOLT M6*10
8
(21)
OLYMPIC PLATE ADAPTER
6
(42)
ALLEN BOLT M6*5
4

4
ASSEMBLY INSTRUCTIONS
STEP 1
Connect the Top Cross Frames (2) to the Main Frames (1 and 2), using 4 Allen Bolts (33), 12 Flat
Washers (29), and 8 Lock Nuts (32).
NOTE: Please tighten all the nuts and bolts with wrenches

5
ASSEMBLY INSTRUCTIONS
STEP 2
Loosen the Allen Bolt (42) and pull-up the Smith Guide Rod (5).
Connect the Barbell (8) to the Guide Rod (5), then pull-down the Guide Rod (5) and tighten the Allen
Bolt (42).

6
ASSEMBLY INSTRUCTIONS
STEP 3
Connect the Counter Balance Cable (27) to the Sliding Mechanism by removing the Flat Washer at
the end of the cable, then connect the Cable to the hole in the Sliding Mechanism, tighten it with 2
Bolts.

7
ASSEMBLY INSTRUCTIONS
STEP 4
Install the Weight Plate Storage Bar (21) to the Main Frames (1 and 2) using 3 Allen Bolts (34) and 3
Flat Washers (29).
Fixing the Stretch Cord Holders (22) to the Main Frame (1) using 2 Flat Washers (30) and 2 Allen Bolts
(36).
NOTE: Please tighten all the Bolts with Allen Wrench.

8
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

9
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2021 Titan Brands