Titan TTS-EN4.0 2W User manual

1
Wireless Endoscope
TTS-EN4.0 2W
User Manual
Please read these instructions carefully before using the device
Safety warning
 Do not modify or disassemble the device.
 Do not look directly into illumination being
emitted by distal end, Otherwise, eye
damage may resulted.
 Do not subject the insertion tube or other
cables to strong pulling, and do not move the
main unit around by holding the cables.
Otherwise, the insertion tube or cables may be
damaged
 Do not subject the distal end to severe impact
or pulling, do not expose the angulation
section to severe impact or bending.
Otherwise, the precision components that
make up the distal end and the angulation
section may be damaged.
 Do not allow any liquids other than water,
saltwater, machine, or diesel oil come into
contact with the insertion tube, Otherwise,
the insertion tube may be damaged.
 Do not allow water come into contact with
parts other than insertion tube, water
creates the risk of electric shock, the parts
of the instrument other than insertion tube
are not watertight, so the instrument should
not be used or stored where it is submerged
or wet.
 Do not use or store the endoscope at a
temperature of more than 50°C or less
than -10°C.
 Store the endoscope in a dry and
adequately ventilated environment.

2
Charg jack (micro
USB)
Light
adjustment
Status indicator
What’s in the carry case
USB cable
Charging Cable
OTG Adapter
Part Functions
Endoscope unit
Steering wheel
Angulation locker
USB jack
Toggle switch
(WIFI-USB)
Recording button
Power On/Off
Freeze button

3
Ø camera head: 4.0 mm
pixel of lens: 1280 x 720 pixels
articulation: 2 ways each 180°
image sensor: CMOS 1/9“
field of view: 120 °
focus: 10 ~ 100 mm
optic: optical glass
white comparison: automatic
exposure to light: automatic
video output: USB
video format: AVI
cable length: 100 cm
camera illumination: multiple LEDs
USB port: micro USB 2.0
power supply: rechargeable Lithium
battery 3000mAh
Ambient/operating
temperature: -10 to + 60° C
total length of device: 120.5 ± 1 cm
gooseneck length: 100.0 ± 1 cm
min. bending radius: 70 - 100 mm
protection class gooseneck
and camera head:
IP67 (waterproof)
weight without accessories: approx. 380 g

4
Start up
Press the button to turn on the device. The indicator lights flash
accordingly. Rotate the steering wheel to control the distal end and
navigate to the targets by rotating the light adjustment wheel to adjust
the brightness on the camera head correctly.
There are two modes available to display images on your device:
WIFI (wireless) or USB (cable connection)
WIFI: Toggle switch on : Camera image is
displayed on the smartphone. (Applicable for
iPhone or Android system)
USB: Toggle switch on: Enable this option to
display it on a PC or smartphone (Android).
WIFI mode

Download and install the App

Scan the QR-Code below or find 'Mo-view'
App in the Appstore (Apple) or Google
Play (Android), and download and install it.

Toggle switch on WIFI side, press button,
indicator light lights up blue

Search for the "iscope _xxxxxx" Wi-Fi signal and click it
to successfully connect the Wi-Fi network. Press the
Rec button to record a phone or video recording (long
press takes 3 seconds)

Open the app, then you'll see the real-time
video

The ❄ button allows you to freeze the screen.
You can get the same function of the Rec
button from the app whose desktop is as
follows:
1
4
QR code
1. Take photo
2. Video recording
3. Playback
4. Settings
Get the Mo-View
icon
to your phone
3

5
USB mode
1. Place the toggle switch on the USB side, the indicator
lights will glow blue and green.
2. Connect the USB cable to the PC.
The image is displayed with Amcap or another
Video recording software on the PC screen
Displayed.
If you connect a smartphone (Android) mpublic, first
download the app and install it. Search the Google
Play Store for "USB camera" or scan the QR code
below to install it on your phone.
OTG Adapter
3. Open the app, you will see the real-time video and the
desktop as follow:
Get the app "USB Camera
Standard" on your phone
1. Take Photo
2. Video recording
3. Playback
4. Settings
5. Rotate the image
1
2
3
4
5

6
Charging
1. If only one white light remains on, it means that the
power consumption is low and needs to be charged.
Use a 5V 1A USB charger. If charged, you may not
be able to use the endoscope or the connection may
be interrupted.
2. A white light flashes during the charging process. The
charging time is about 3 hours. When all three white
lights are on and none flashes, the device is charged.
Please note that the endoscope cannot be used
during loading.
3. The built-in 3000 mAh lithium battery can be used for
about 6 hours after full charging
Use via PC
In order to be able to use the Titan Wifi video endoscope
on the PC or laptop without any problems, the software
from Bluestacks is recommended for download:
https://www.bluestacks.com/download.html
With this software you can download all apps from the
Google PlayStore. As soon as the software has been
downloaded, the Google PlayStore can be opened via the
start screen and after logging in, any app can be
downloaded, just like on a phone.
Correct disposal of this product
To avoid possible environmental or health
damage caused by uncontrolled waste
disposal, please separate this item from the
other types of waste and recycle it
responsibly to promote the sustainable reuse
of material resources.
We reserve the right to make any changes to the main unit
and camera cables in an improved version. Therefore, it is
possible that new goods have different specifications than
the original variant.
Certification:
CE -This device is CE compliant and complies with EC
Directive 2014/53/EU.
Test Standards: EN61010-1, EN50663, EN300328,
EN55032, EN55035, EN61000, EN301489
Imprint
This manual was published by Titan Technology GmbH, An der
Feuerwache 9, D-41836 Hückelhoven (www.titan-tech.de). All rights,
including translation, are reserved. Any reproduction, e.B.
photocopying, microfilming, or even recording in electronic data
processing systems, requires the written permission of the publisher.
This manual corresponds to the technical state of play when
printing. Changes in technology and equipment reserved