Titan TTB671VAC User manual

Original Instructions_TTB671VAC_GB_V4_150908
TTB671VAC
Vacuum Cleaner
800W
Barcode: 5052931541393
Ref. No.: 7994J
WARNING: Read the instructions before using the product! BX220IM

Congratulations on your purchase of a power tool from
Kingfisher International Products B.V. We want you to continue
getting the best performance from it so this handbook includes
information on safety, handling and care. Please retain this handbook
in case you need to refer to any of the information in the future.
Your power tool comes with a 2 years guarantee, so
should it develop a fault within this period contact your retailer.
GUARANTEE
This product carries a guarantee of 2 year. If your product develops a
the item was purchased.
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (Such as dust bag,filter,brush)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in
the UK.
For any enquiries relating to the guarantee please refer to your retailer.
Vacuum Cleaner 800W – TTB671VAC

EN
03
These instructions are for your safety. Please read through them
thoroughly before use and retain them for future reference.
Let’s
get started...
29
30
28
21
23
19
In more detail...
Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
EC declaration of conformity
18
03
04
09
12
Getting started...
Safety information
Your product
Before you start

04
Getting started...
EN TTB671VAC by TITAN
Safety information
Safety warnings
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE!
>This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge.
>Children should be supervised to ensure that they do
not play with the product.
>If the supply cord is damaged, it must be replaced by
persons in order to avoid a hazard.
>Before vacuuming, remove any large, sharp or sharp-
and/or product.
>Do not vacuum any hot or incandescent objects, liquids,
>
>Carry, pull and push the product only by the handle, not
by the suction hose or power cord.
>Lay out the cord in such a way that no unintentional
pulling or tripping over is possible.
>Do not attempt to modify the product in any way.
>Only use attachments and accessories recommended
by the manufacturer.
>
combustible liquids, such as gasoline, photocopier
powder or volatile substances; and do not use the

05
Getting
started...
EN
TTB671VAC by TITAN Safety information
product in areas where these liquids are present. Do
not vacuum up acids.
>Do not vacuum up any objects which are toxic, cancer
causing, combustible, or any other dangerous materials,
such as asbestos, asbestos dust, arsenic, barium,
beryllium, lead, pesticides, or any other substances
hazardous to health.
>Pay special attention when vacuuming up wood or
charcoal ashes, soot, cement, plaster, or plasterboard
necessary.
>DANGER OF FIRE! Never vacuum up any objects
which are burning or smoldering, such as cigarettes,
cigarette butts, matches, or hot ashes.
>WARNING! Operators shall be adequately instructed
on the use of this product!
>WARNING! The product is not suitable for picking up
hazardous dust!
>WARNING! This product is for dry use only!
>CAUTION! This product is for indoor use only!
>CAUTION! This product shall be stored indoors only!
>WARNING! Switch the product off and disconnect it
from power supply by pulling the plug before cleaning,
maintaining, replacing attachments / accessories or
converting to another function!
>WARNING! Do not allow the power cord and extension
cord to come into contact with the rotating brushes!

06
Getting started...
EN TTB671VAC by TITAN
Safety information
Safety warnings
Electrical safety
>Ensure the rated voltage shown on the rating label
corresponds with the voltage of the power supply.
>Do not operate any appliance with a damaged power
cord or plug, when the appliance malfunctions or has
been damaged in any manner.
>Protect the power cord against damages. Do not let it
hang over sharp edges; do not squeeze or bend them.
Keep the power cord away from hot surfaces and
ensure that nobody can trip over it.
>
the appliance and do not obstruct the air vents.
>Protect the appliance against heat. Do not place close
to heat sources such as stoves or heating appliances.
Emergency
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety directions and follow them to the letter. This
will help to prevent risks and hazards.
>Always be alert when using this product, so that
you can recognise and handle risks early. Fast
intervention can prevent serious injury and damage to
property.
>Switch off and disconnect from the power supply
if there are malfunctions. Have the product checked
before you operate it again.

07
Getting
started...
EN
TTB671VAC by TITAN Safety information
WARNING! Some dust created by power sanding,
sawing, grinding, drilling and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paint
• Crystalline silica from bricks and cement and
other masonry products
• Arsenic and chromium from chemically treated
timber
Your risk from these exposures varies, depending
upon how often you do this type of work. To reduce
your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved protective equipment,
such as those dust masks that are specially
Symbols
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
V~ Volt, (alternating voltage) kg Kilogram
Hz Hertz kPa Kilopascal
W Watt °C Degree Celsius
mm Millimetre Ø Diameter
m Metres dB(A) Decibel (A-rated)
l Litre m/s² Metres per second
squared
IPX0 Total protection against contact, protection against penetration of
dust but no protection against water

08
Getting started...
EN TTB671VAC by TITAN
Safety information
Symbols
Lock / to tighten or secure. Unlock / to loosen.
Note / Remark. Caution / Warning.
Read the instruction
manual.
Wear eye protection.
Wear a dust mask. Wear hearing protection.
Wear protective gloves. Beware of electric
voltage!
Only use in dry indoor
rooms.
yyWxx Manufacturing date code; year of manufacturing (20yy) and week
of manufacturing (Wxx)
Switch the product off and disconnect it from the power supply
before assembly, cleaning, adjustments, maintenance, storage
and transportation.
This product is of protection class II. That means it is equipped
with enhanced or double insulation.
Dry
The product complies with the applicable European directives
and an evaluation method of conformity for these directives was
done.
WEEE symbol. Waste electrical products should not be disposed
of with household waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.

09
Getting
started...
EN
TTB671VAC by TITAN Your product
Your product
10
11
12
13
13a
14
1 2 3 4
5
6
7
8
9
15 15a
16
17
19
20
18
21
22 24 25
23

TTB671VAC by TITAN
Your product
EN
Getting started...
10
Your product
1. On/off switch
2. Power indicator
3. Transport handle
4. Motor unit
a. Air inlet*
b. Filter*
c. Basket*
d. Tongue*
e. Groove*
f. Pin*
5. Fastener (left & right)
6. Base
7. Wheel (x 2)
a. Screw* (x 4)
8. Castor (x 2)
9. Collection container
10. Intake
a. Release button*
11. Hose connector
12. Suction hose
13. Suction handle
a. Suction power control
14. Suction tube (x 2)
15. Combination brush
a. Brush switch*
b.
16. Power cord rewind button
17. Power cord with plug
18. Attachment storage
19. Hook
20.
a. Latch*
b. Lid*
c.
d. Air vents*
21.
Crevice nozzle
22.
Round brush
23.
Power tool adaptor
24. Dust bag
25.
NOTE: Parts marked with * are not shown in this overview. Please
refer to the respective section in the instruction manual.
General
>Rated voltage, frequency : 220 - 240 V~, 50/60 Hz
>Rated power input Prated :800 W
>Vacuum pressure : 19 kPa
> Collection container volume : 15 l
> Degree of protection : IPX0
> Protection class : II
> Weight : approx. 7.8 kg
> Dimensions : approx. 392 x 377 x 418 mm
Sound values
>Sound pressure level LpA :67.2 dB(A)
>Sound power level LWA :76 dB(A)

TTB671VAC by TITAN Your product
Getting
started...
EN
11
>Uncertainty KpA, KWA :2 dB(A)
Hand arm vibration values
>Hand arm vibration ah:0.122 m/s2
>Uncertainty K : 0.05 m/s2
The sound values have been determined according to noise test code given in
EN 60335-2-69, using the basic standards ISO 3744 and ISO 11203.
The sound intensity level for the operator may exceed 85 dB(A) and ear
protection measures are necessary.
The declared vibration value has been measured in accordance with a standard
test method (according to EN 60335-2-69) and may be used for comparing
one product with another. The declared vibration value may also be used in a
preliminary assessment of exposure.
WARNING! Depending on the actual use of the product the vibration
values can differ from the declared total. Adopt proper measures to
protect yourself against vibration exposures. Take the whole work
process including times the product is running under no load or
switched off into consideration.
Proper measures include among others regular maintenance and
care of the product and accessories, keeping hands warm, periodical
breaks and proper planning of work processes.
VACUUM CLEANER TTB671VAC
Description Symbol Value Unit
A+++ - D B -
Annual energy
consumption AE 28.5 kWh/year
Carpet cleaning
performance dpucD -
performance dpuhf A -
Dust re-emission drew 0.05 %
Sound power level LWA 76 dB(A)
Rated power input P800 W

TTB671VAC by TITAN
EN
Getting started...
12
Before you start
Unpacking
>
> Remove all packing materials and shipping devices, if applicable.
> Make sure the delivery contents are complete and free of any damage. If you
your dealer. Using an incomplete or damaged product represents a hazard to
people and property.
> Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
You will need
(items not supplied)
Suitable personal protective equipment
Suitable crosshead screwdriver
(items supplied)
Suction tube (x 2) (14)
Combination brush (15)
Crevice nozzle (21)
Round brush (22)
Power tool adaptor (23)
Dust bag (24)
Assembly
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.

TTB671VAC by TITAN Before you start
Getting
started...
EN
13
Base
>
> Align and attach the castors (8) onto the base (6). Push the castors (8) all the
way to the stop.
> Align the markings “1” / “2” and assemble the wheels (7) onto the base (6).
Secure the connection with the screws (7a) (Fig. 1).
8
77a
6
Fig. 1
> Turn the assembled main body with the wheels (7) / castors (8) right way up
Dust collection
NOTE:
Use the dust bag to achieve better performance and easy maintenance
disposal of dust and cleaning collection container etc.) if required.
> Place the dust bag (24) into the collection container (9).
> Ensure the dust bag (24) is properly attached on the inner opening of the
intake (10) (Fig. 2).
10
24
9
Fig. 2

TTB671VAC by TITAN
Before you start
EN
Getting started...
14
Assembly
>
collection container (9). Ensure the
(Fig. 3).
> Place the motor unit (4) onto the
collection container (9) and secure it
with the fasteners (5) (Fig. 4).
9
25
Fig. 3
4
5
9
1.
2.
Fig. 4

TTB671VAC by TITAN Before you start
Getting
started...
EN
15
Suction hose and tube
> Insert the hose connector (11) into the outer opening of the intake (10) all the
way to the stop. Ensure it is properly secured (Fig. 5).
1011
Fig. 5
>
necessary. Use the suction tube(s) with different accessories according to the
intended application.
WARNING! Do not use the suction tube(s) (14) when using the product
connected with a power tool as dust extraction device! The power tool
adaptor (23) shall be connected directly onto the suction handle (13).
> Connect the desired accessory onto the suction tube (14) / suction handle (13)
(Fig. 6).
21
15
14 13
22
23
21
22
Fig. 6
> Press the release button (10a) and keep it in position to disconnect the hose
connector (11) from the intake (10) after use (Fig. 7).

TTB671VAC by TITAN
Before you start
EN
Getting started...
16
Assembly
10a
10
11
1.
2.
Fig. 7
Accessories
A choice of accessories is supplied in the scope of the delivery of this product.
Illustration Description Application
Combination
nozzle (15) Tiles, wooden
Rugs, carpets.
Crevice
nozzle (21)
Crevices, corners,
cracks and other
places hard to reach.
Round brush
(22)
Heavy fabrics and rugs
such as car carpets.
Do not use the round
brush on sensitive
fabrics like clothes.
Power tool
adaptor (23)
Connect the adaptor
to the dust exhaust of
power tools for clean
DIY.

TTB671VAC by TITAN Before you start
Getting
started...
EN
17
Combination nozzle
>
(15b) before using the combination
nozzle (15) (Fig. 8). Fix the combination
use to prevent movement of the nozzle
head during transport.
> Use the brush switch (15a) according to
the intended application (Figs. 9, 10).
15a
15b
Fig. 8
Fig. 9 Fig. 10
Connection to power supply
> Make sure the on/off switch (1) is not pressed.
> Pull the power cord (17) outward and connect the plug with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
WARNING! If vacuuming for extended period of time (> 30 minutes),
the power cord must be completely pulled out. Otherwise there is a
danger of overheating and damage.
> Your product is now ready to be used.

Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
EC declaration of conformity
28
29
30
23
21
19
18
In more detail...
GB
IE
TTB671VAC by TITAN
In more
detail...

TTB671VAC by TITAN EN
19
In
more
detail...
EN
Product functions
Intended use
This vacuum cleaner TTB671VAC is designated with a rated input of 800 Watts.
This product is intended for dry vacuuming operations with respective
attachments only. This product can also be used as a dust extraction device with
connected power tool.
This product must not be used to vacuum up liquid in any form, especially
substances; and it is not suitable for operation in areas where these liquids are
present. It is also not intended for vacuuming up acids.
operation and to observe all the instructions therein.
This product is intended for private domestic use as well as commercial use, e.g.
not be used for any purposes other than those described.
>
>
dirty. We recommend washing it every 60 hours (if too dusty, every 30 hours)
with clear water.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean the dust bag as they might be
harmful to its surfaces/material.
>
and using it again.
Dust bag
Use the dust bag (24) to achieve better performance if required.
> Inspect the dust bag regularly. Do not use it if you detect any damage.
> Replace the dust bag frequently. Do not wait until the dust bag is completely
suction power.
NOTE: A full dust bag reduces the performance of this product.

TTB671VAC by TITAN
Product functions
20
EN
In more detail...
EN
Dust bag
> Switch the product off and disconnect it from the power supply.
>
the collection container (9) (Fig. 11).
> Disconnect the dust bag (24) from the inner opening of the intake (10) and
remove it carefully from the collection container. Install a new one afterward.
10
4
9
25
5
24
1.
4.
2.
3.
Fig. 11
>
Adjusting suction power
Adjust the suction power according to the
intended application (Fig. 12).
> Slide the suction power control (13a)
forward (as seen from operator’s
position) to increase the suction power.
> Slide the suction power control (13a)
backward (as seen from operator’s
position) to decrease the suction power.
13
13a
+
-
Fig. 12