Toa EXES-6000 CP-64 User manual

EXES- 6000
CP-64
INTERCOM SYSTEM
CP-64
Functions and
Operating Instructions
TOA ELECTRIC CO., LTD.
KOBE, JAPAN
133-06-081-8

Introduction to t e "Functions and Operating
lnstructions" for stations for EXES-6000 .......... 3
Chapter 1. Bas c Funct ons, The r Operat ng Procedures and
All Funct ons
1. Stations ............................... 4
2. Speec Functions ......................... 5
3. Station Operation
1) Handset Master Station (TL-600M) ........... 6
2) Handset Substation (TL-600S) ..............
6
3) Hands-free Master Station
(HF-620M/630M/631M/650M) .............. 7
4) Hands-free Substation
(HF-620S/630S/631S/640S) ................ 9
5) Hands-free/Handset Master Station
(HF-600M/610M/660M) ....................11
6) Hands-free/Handset Substation (H F-600S/610S) ...13
7) Hands-free/Handset Master Station wit Auto-dialer
(HF-660M) ...................................... 15
Chapter 2. Funct ons and Operat ng Procedures of S ngle
Exchange System for a Max mum of 256 Stat ons
1. Part Names and Functions of t e Station Keyboard ... 18
2. Function Description ...................... 19
3. EXES-6000 CP-64 Summary of Dial Operations
(For Single Exc ange) ...................... 21
4. Description of Eac Function
1) Automatic Line Release ................... 23
2) Camp-On-Busy ......................... 23
3) Privacy .............................. 23
4) Camp-On-Privacy ....................... 24
5) Press-To-Talk .......................... 24
6) Mic Off .............................. 24
7) Press-To-Talk Control .................... 25
8)
Single Digit Dialing ...................... 26
9) Master Sub Relations ip .................. 27
10) Automatic Access To Paging ................ 27
11) Personal Number Call .................... 28
12) Continuous Calling Tone .................. 29
13) Remote Response ....................... 39
14) Call Transfer, Paging during Normal Call........ 31
15) Group Hunting ......................... 32
16) Secretary Transfer ...................... 33
17) Call Forwarding ........................ 36
18) Priority .............................. 37
19) Executive Priority ....................... 37
20) Hig est Executive Priority ................. 38
21) Conference ........................... 39
22) Paging ............................................ 40
23) Ot er Paging Modes ..................... 41
24) How to Select t e Paging Area and Make t e
Paging Call ........................... 42
25) All-Call Paging and Individual Zone Paging ...... 43
26) Combination Paging ..................... 44
27) Emergency All-Call Paging ................. 46
28) Paging Priority ......................... 47
29) Personal Number Paging ................... 48
30) Selectable First Station Number ............. 49
31) Programmable Station Numbering ............ 49
32) Group Blocking ........................ 50
33) Programmable Restricted Access for Stations .........51
34) Selectable Calling Tone ................... 52
35) Selectable Paging Pre-Announcement Tone
Duration ............................. 52
36) Time-Out of Conversation ................. 52
37) Time-Out of Paging Call ................... 52
38) In/Out Annunciation ..................... 53
39) Destination Annunciation Indication .......... 54
40) Calling Party Indication [Lamp Type] ......... 55
41) Calling Party Indication [Numerical Type] ...... 56
42) Pocket Pager .......................... 57
43) General Purpose Control .................. 58
44) Simplified Paging ....................... 59
45) Clear Entry and Conversation Over ........... 59
Contents
– 1 –
4. Functions: EXES-6000 CP-64 ....................... 15

Chapter 3. Funct ons and Operat ng Procedures of T e-L ne
System for a Max mum of 768 Stat ons
1. Part Names and Functions of t e Station Keyboard ... 60
2. Tie-Line Connections of Exc anges ............. 61
3. Function Description ...................... 63
4. Restrictions Resulting from Tie-Line Connection . . . . 65
5. EXES-6000 CP-64 Summary of Dial Operations
(For Tie-Line System) ...................... 66
6. Description of Eac Function
1) Automatic Line Release ................... 68
2) Camp-On-Busy ......................... 68
3) Privacy .............................. 68
4) Camp-On-Privacy ....................... 69
5) Press-To-Talk .......................... 69
6) Single Digit Dialing ...................... 70
7) Master Sub Relations ip .................. 71
8) Automatic Access To Paging ................ 71
9) Personal Number Call .................... 72
10) Continuous Calling Tone .................. 73
11) Remote Response ....................... 74
12) Call Transfer, Paging during Normal Calls ....... 75
13) Group Hunting ......................... 76
14) Secretary Transfer ...................... 77
15) Hig est Executive Priority ................. 80
16) Conference ........................... 81
17) Paging .............................. 82
18) How to Select t e Paging Area and Make t e
Paging Call ........................... 83
19) All-Call Paging and Individual Zone Paging ...... 84
20) Selectable First Station Number of Eac
Exc ange ............................ 85
21) Programmable Station Numbering ............ 86
22) Group Blocking ........................ 87
23) Programmable Restricted Access for Stations ..... 89
24) Selectable Calling Tone ..................90
25) Selectable Paging Pre-Announcement Tone
Duration ........................90
26) Time-Out of Conversation ................ 90
27) Time-Out of Paging Call ................... 90
28) In/Out Annunciation ................... 91
29) Calling Party Indication [Lamp Type] ......... 92
30) Pocket Pager .......................... 94
31) General Purpose Control .................. 95
32) Simplified Paging ...................... 97
33) Clear Entry and Conversation Over ........... 97
– 2 –

T is andbook explains t e functions and operating
procedures of stations for TOA's EXES-6000 Intercom
System using central processing unit CP-64 (for single
exc ange or tie-line system) and exc anges EX-630.
Designed for connection of up to 3 exc anges, t e EXES-
6000 system permits you to talk wit t e person in t e
remote area, and also to increase t e number of stations
w ic one (1) exc ange cannot cover.
Th s handbook s compr sed of the follow ng 3 chapters:
Chapter 1. Bas c funct ons, the r operat ng procedures
and all funct ons.
Chapter 2. Funct ons and operat ng procedures of s ngle
exchange system (a max mum of 256
stat ons).
Chapter 3. Funct ons and operat ng procedures of t e-
l ne system (a max mum of 768 stat ons).
Refer to Chapters 1 and 2 for s ngle exchange system
and to Chapters 1 and 3 for t e-l ne system.
Please note t at performances of some functions are
restricted in t e tie-line system.
You need not read all t e instructions given in t is and-
book but it is necessary to read t e instructions on t ose
functions employed in your system. T e following guide-
lines will elp you select t e pages t at you s ould read.
Select ng d fferent funct ons made ava lable by plac ng the
Pr vacy Sw tch n the "ON" pos t on
T e EXES-6000 System is designed to allow eit er "PV"
typ operation (T e system aving Privacy function) or
"NP" type (Wit out Privacy function) to be selected by
turning on or off a switc inside t e exc ange. It is impos-
sible to make one station t e "NP" type and anot er t e
"PV" type in t e same system.
T e function provided w en t e Privacy switc is in t e ON
position is different between t e "PV" and t e "NP" type.
T erefore, read t e page marked if your system
is of t e "PV" type and t e Page if it is of t e
"NP" type.
"PV" Type and "NP" Type
Type
Definition
System aving
Privacy function
System aving
no Privacy func-
tion
Description
1 . Privacy tone
Wit t e Privacy switc in
t e ON position, a brief
Privacy tone sounds and
any incoming call is refused.
2. T e Handset Master/Sub-
station may not be used in
t is system. If used, it is
not called by a continuous
calling tone but by a brief
Privacy tone.
1. Continuous calling tone
A station wit t e Privacy
switc may be called by t e
continuous calling tone
w en its Privacy switc is
placed in t e ON position.
One touc dialing any key
t roug
ot er t an t e
key or picking up t e
andset stops t e calling
tone and t e stations is
made ready to initiate t e
response to t e call.
2. T e Handset Master
station wit out Privacy
switc may be called by
t e continuous calling
tone. Picking up t e and-
set stops t e calling tone
and allows t e conversation.
Note.
By programming, t e continuous calling tone function
may be made available to specific stations wit t e
Privacy switc in t e OFF position.
In t is event, touc dialing any key t roug
ot er t an t e key stops t e calling tone
and permits conversation.
T is feature may be employed for t e industrial type of
station (Model HF-650M) or in t e "PV" type system
t at needs to be continuously called.
Introduct on to the "Funct ons and Operat ng Instruct ons" for stat ons for EXES-6000
– 3 –

C apter 1
Basic functions, t eir operating
procedures and all functions

1. TL-600M
2. TL-600S
3. HF-660M
4. AK-024
5. HF-600M
6. HF-600S
7. HF-610M
8. HF-610S
Desk/Wall-Mounted Handset Master
Station
Desk/Wall-Mounted Handset Sub-
station
Desk / Wall-Mounted Hands-Free /
Handset Master Station wit Auto-
Dialer (8 keys — 16 registrations)
Auto-Dialer Key Unit (24 keys)
Desk Hands-Free/Handset Master
Station
Desk Hands-Free / Handset Substa-
tion
Flus -Mounted Hands-Free/Hand-
set Master Station
Flus -Mounted Hands-Free / Hand-
set Substation
9. HF-620M
10. HF-620S
11. HF-630M
12. HF-630S
13. HF-631M
14. HF-631S
15. HF-640S
16. HF-650M
Desk/Wall-Mounted Hands-Free
Master Station
Desk/Wall-Mounted Hands-Free
Substation
Flus -Mounted Hands-Free Master
Station
Flus -Mounted Hands-Free Sub-
station
Flus -Mounted Hands-Free Master
Station (Stainless steel panel)
Flus -Mounted Hands-Free Sub-
station (Stainless steel panel)
Door Station (Hands-free)
Surface-Mounted Industrial Master
Station (Hands-free)
TL-600S TL-600M
TL-600M/S
HF-600M
HF-650M HF-630M
HF-631M
HF-630S
HF-631 S
HF-640S
HF-610M
HF-600S
HF-620M
HF-620S HF-660M
HF-610S
Stat ons
– 4 –

Eit er "PV" Type (t e system wit Privacy function) or "NP" Type (Wit out Privacy function) mode s ould be selected in
t e total intercom system.
W en Privacy Switc (SW) of station is turned ON, privacy tone is available in "PV" Type system, w ile continuous calling
tone is available in "NP" Type system.
Call ng
Vo ce
Rece v-
ng
Speech
Methods
Functions
Dialing
One-Touc Dialing
Dialing after picking
up Handset and
comfirming Dial
tone
Calling by picking
up Handset
Voice Calling
Hands-free Calling
and Conversation
Continuous Calling
Tone Response by
One-Touc Dialing
(No. 200 program-
ming)
*1
Privacy
Continuous Calling
Tone.Picking up
Response (in Privacy
Mode)
Continuous Calling
Tone-One-Touc
Response (in Privacy
Mode)
Voice Switc
Conversation
Simplex Conversa-
tion by Press-to-
Talk key
Full Duplex
Conversation
Descriptions
Calls are made by touc ing dial.
Even if t e Privacy SW is on, calling is possible.
Substations can make a call to designated Master
Stations by one-touc dialing. Calling is possible even
if t e Privacy SW is on.
Calls can be made by touc ing dial button after
picking up andset, and confirming dial tone is eard.
Substations can make a call to designated Master
Stations just by picking up t e andset.
W en called by continuous calling tone or privacy
tone, voice can be sent by pressing bar.
Wit touc -dial, after a brief calling tone Hands-free
conversation is available.
Wit touc -dial, a continuous calling tone is sent.
Hands-free Conversation is available w en called party
depresses, t e or key
W en calls are unwanted, turn ON Privacy SW. T en, a
brief privacy tone sounds w en called. By turning off
Privacy SW or touc ing any key ( key)
or picking up a andset, conversation becomes
available.
W en called by Continuous Calling Tone, conversation
is possible by picking up andset.
Calls can be made just by touc ing t e
or key.
Wit out picking up andset w en called by
Continuous Calling Tone.
Voice switc conversation is available automatically,
w en two parties speak in ands-free mode.
One-way conversation is available by a party w o
presses . Releasing t e bar will reverse
t e one-way conversation flow.
Full duplex conversation is available w en one or two
parties are speaking using a andset.
Stations *2
Wit out
Privacy SW
HF-650M
H F-640S
TL-600M
*2
TL-600S
*2
Wit
Privacy SW
HF-660M
HF-600M,
610M
HF-620M,
630M
HF-631M
HF-600S
HF-610S,
620S
HF-630S,
631 S
HF-660M
HF-600M
HF-610M
H F-600S
HF-610S
All stations except
HF-640S
HF-640S
HF-650M
HF-640S
HF-650M
—
TL-600M/S
*2
—
HF-640S
HF-650M
H F-640S
HF-650M
TL-600M/S
*2
HF-640S
HF-650M
H F-660M
HF-600M/S
HF-610M/S
620M/S
H F-630M/S
631 M/S
H F-660M
HF-600M/S
HF-610M/S
620M/S
630M/S
631 M/S
HF-660M
HF-600M/S
HF-610M/S
HF-620M/S
HF-630M/S
HF-631M/S
HF-660M
HF-600M/S
HF-610M/S
Same as
"Privacy"
HF-660M
HF-600M/S
610M/S
HF-620M/S
HF-630M/S
631 M/S
HF-660M
HF-600M/S
HF-610M/S
HF-620M/S
HF-630M/S
631 M/S
HF-660M
HF-600M/S
610M/S
HF-620M/S
630M/S
H F-631 M/S
Privacy
SW
ON/OFF
ON/OFF
ON
ON
ON/OFF
OFF
OFF
ON
ON
ON
ON/OFF
ON/OFF
ON/OFF
System
types
PV
NP
*1 T is function may be employed for t e industrial type of station (Model HF-650M) or in t e "PV" type system t at needs to be continu-
ously called.
*2 All stations ot er t an t e TL-600M/S (Intended for exclusive use in NP type system) may be used in bot t e PV and NP type system.
Speech funct ons
– 5 –

1) Handset Master Stat on
Model TL-600M
NP Type
Handset
In-use lamp
Speaker volume switc
Dial keys
key
< Making a call >
1. Pick up t e andset and touc dial t e station
number of t e party you wis to talk to after earing
dial tone.
2. Start conversation after t e calling tone stops.
3. W en you ear a busy tone t at indicates t e party
you call is on anot er line, you can camp on t e line
by simply waiting wit out anging up t e andset.
As soon as t e line becomes free, your call is auto-
matically connected.
4. W ile t e continuous calling tone is sent, you can
break in on t e calling tone by continuously depress-
ing t e key to make a voice call t roug t e
station speaker of t e called party.
5. Hang up t e andset or depress t e key to termi-
nate t e conversation.
< Responding to a call >
6. W en you are called by t e continuous calling tone or
paged t roug your station speaker, respond to t e
call by picking up t e andset.
Note.
T e sound volume of t e calling tone may be adjusted
by means of a 2-stage volume selector (SP. VOL) switc .
2) Handset Substat on
Model TL-600S
NP Type
Handset
In-use lamp
Speaker volume switc
key
< Making a call >
1. Picking up t e andset makes a call to t e designated
ot er station.
2. Start conversation after t e calling tone stops.
3. W en you ear a busy tone t at indicates t e party
you call is on anot er line, you can camp on t e line
by simply waiting wit out anging up t e andset.
As soon as t e line becomes free, your call is auto-
matically connected.
4. W ile t e continuous calling tone is sent, you can
break in on t e calling tone by continuously depress-
ing t e key to make a voice call t roug t e
station speaker of t e called party.
5. Hang up t e andset to terminate t e conversation.
<Responding to a call>
6. W en you are called by t e continuous calling tone or
paged t roug your station speaker, respond to t e
call by picking up t e andset.
Note.
T e sound volume of t e calling tone may be adjusted
by means of a 2-stage volume selector (SP. VOL) switc .
Stat on operat on
– 6 –

3) Hands-free Master Stat on
Model HF-620M/630M/631M/650M
PV Type
Speaker volume switc
Microp one
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-620M
HF-630M
HF-631M
HF-650M
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
7. Respond to t e call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
8. A brief Privacy tone sounds from your station eac
time t ere is an incoming call and all incoming calls
are refused.
To respond touc dial any key
ot er t an t e key w ile t e line is connected
between you and t e calling party.
Note.
1.T e sound volume of t e speaker may be adjusted by
means of t e 2-stage volume selector (VOL) switc .
2. Wit no speaker built inside, t e HF-650M needs to be
connected to a separate speaker. Also, t e HF-650M
is fitted wit no Privacy switc .
< Making a call >
1. Touc dial t e station number you wis to call,
regardless of w et er t e Privacy switc of your
station is in t e ON position or OFF position.
2. Start conversation after t e calling tone stops.
3. W en t e line is busy, a busy tone is eard and you
can camp on t e line by simply waiting. As soon as
t e line becomes free, your call is automatically
connected.
4. During a call attempt made by means of t e continu-
ous calling tone or t e Privacy tone, you can break
in on t e calling tone by continuously depressing t e
key to make a voice call t roug t e station
speaker of t e called party.
5. W en t e party you call is in a ig noise level area,
your continuously depressing t e key allows
one-way conversation to t at party. As long as you
depress t e key, your voice as dominance
and releasing t e key will reverse t e one-way
conversation from t at party to you.
6. To terminate t e conversation, depress t e key.
– 7 –

3) Hands-free Master Stat on Model HF-620M/630M/631M/650M
NP Type
Speaker volume switc
Microp one
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-620M
HF-630M
HF-631M
HF-650M
< Making a call >
1. Touc dial t e station number you wis to call,
regardless of w et er t e Privacy switc of your
station is in t e ON position or OFF position.
2. Start conversation after t e calling tone stops.
3. W en t e line is busy, a busy tone is eard and you
can camp on t e line by simply waiting. As soon as
t e line becomes free, your call is automatically
connected.
4. During a call attempt made by means of t e continu-
ous calling tone, you can break in on t e calling tone
by continuously depressing t e key to make a
voice call t roug t e station speaker of t e called
party.
5. W en t e party you call is in a ig noise level area,
your continuously depressing t e key allows
one-way conversation to t at party. As long as you
depress t e key, your voice as dominance
and releasing t e key will reverse t e one-way
conversation from t at party to you.
6. To terminate t e conversation, depress t e key.
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
7. Respond to t e call after t e calling tone stops .
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
8. T e continuous calling tone function is made avail-
able to any station if its Privacy switc is placed in
t e ON position. Depressing any key (
) ot er t an t e key causes t e continu-
ous calling tone to stop and puts t e station in t e
conversation mode.
Note.
1. T e sound volume of t e speaker may be adjusted by
means of t e 2-stage volume selector (VOL) switc .
2. Wit no speaker built inside, t e HF-650M needs to be
connected to a separate speaker. Also, t e HF-650M
is fitted wit no Privacy switc .
– 8 –

4) Hands-free Substat on Model (HF-620S/630S/631S/640S) PV Type
Speaker volume switc
Microp one
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-620S
HF-630S
HF-631S
HF-640S
< Making a call >
1. Touc ing t e key makes a call to t e designated
ot er station w et er t e Privacy switc on your
station is in t e ON position or OFF position.
2. Start conversation after t e calling tone stops.
3. W en t e line is busy, a busy tone is eard and you
can camp on t e line by simply waiting. As soon as
t e line becomes free, your call is automatically
connected.
4. During a call attempt made by means of t e continu-
ous calling tone or t e Privacy tone, you can break
in on t e calling tone by continuously depressing t e
key to make a voice call t roug t e station
speaker of t e called party.
5. W en t e party you call is in a ig noise level area,
your continuously depressing t e key allows
one-way conversation to t at party. As long as you
depress t e key, your voice as dominance
and releasing t e key will reverse t e one-way
conversation from t at party to you.
6. To terminate t e conversation, depress t e key.
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
7. Respond to t e call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
8. A brief Privacy tone sounds from your station eac
time t ere is an incoming call, and all incoming calls
are refused.
To respond, touc dial t e or key w ile t e
line is connected between you and t e calling party.
Note.
1. T e sound volume of t e speaker may be adjusted by
means of t e 2-stage volume selector (VOL) switc .
2. T e HF-640S is fitted wit no Privacy switc , nor
key, nor key.
– 9 –

4) Hands-free Substat on Model (HF-620S/630S/631S/640S)
NP Type
Speaker volume switc
Microp one
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-620S
HF-630S
HF-631S
HF-640S
< Making a call >
1. Touc ing t e key makes a call to t e designated
ot er station w et er t e Privacy switc on your
station is in t e ON position or OFF position.
2. Start conversation after t e calling tone stops.
3. W en t e line is busy, a busy tone is eard and you
can camp on t e line by simply waiting. As soon as
t e line becomes free, your call is automatically
connected.
4. During a call attempt made by means of t e continu-
ous calling tone, you can break in on t e calling tone
by continuously depressing t e key to make
a voice call t roug t e station speaker of t e called
party.
5. W en t e party you call is in a ig noise level area,
your continuously depressing t e key allows
one-way conversation to t at party. As long as you
depress t e key, your voice as dominance
and releasing t e key will reverse t e one-way
conversation from t at party to you.
6. To terminate t e conversation, depress t e key.
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
7. Respond to t e call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
8. T e continuous calling tone function is made avail-
able to any station w en its Privacy switc is in t e
ON position. Depressing t e or key makes t e
continuous calling tone stop and puts t e station in
t e conversation mode.
Note.
1. T e sound volume of t e speaker may be adjusted by
means of t e 2-stage volume selector (VOL) switc .
2. T e HF-640S is fitted wit no Privacy switc , nor
key, nor key.
– 10 –

5) Hands-free / Handset Master Stat on Model HF-600M/610M/660M (W th Auto-D aler) PV Type
Handset
Speaker volume switc
Microp one
Loud speaker
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-600M
HF-610M HF-660M
< Making a call >
1. Hands-free conversation may be made by simply
touc dialing t e station number you wis to call.
2. W en you wis to use t e andset, pick it up, t en
touc dial t e station number you wis to call, or
reverse t e order.
3. Start conversation after t e calling tone stops.
4. W en you ear a busy tone t at indicates t e party
you call is on anot er line, you can camp on t e line
by simply waiting. As soon as t e line becomes free,
your call is automatically connected.
5. In t e event t at t e party you are calling does not
respond and t e continuous calling tone is still eard
from your station, or w en t e station of t at party
is in t e Privacy mode and t e Privacy tone is sound-
ed, you can break in on t e calling tone by continu-
ously depressing t e key to make a voice call
t roug t e station speaker of t e called party.
6. During ands-free conversation, w en t e person you
are talking to is in a ig noise level area,
(1 ) Pick up t e andset to talk or (2) depress t e
key continuously for one-way conversation
to t at party. As long as t e key is depres-
sed, your voice as dominance, and releasing t e
key will reverse t e one-way conversation
from t at party to you.
7. To terminate t e conversation, ang up t e andset
or depress t e key.
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
8. Respond to call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
9. A brief Privacy tone will sound from your station
eac time it receives an incoming call and all incom-
ing calls are refused.
To respond, depress any key
ot er t an t e key or pick up t e andset
w ile t e line is still connected between your station
and t e calling station. T ese 2 busy stations are,
owever, automatically disconnected from t e speec
pat after approximately 10 seconds from call
establis ment if no response is made by you.
Note.
T e sound volume of t e loud speaker may be adjusted
by means of t e 2-stage volume selector (VOL) switc .
– 11 –

5) Hands-free / Handset Master Stat on Model HF-600M/610M/660M (W th Auto-D aler) NP Type
Handset
Speaker volume switc
Microp one
Loud speaker
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-600M
HF-610M
HF-660M
< Making a call > < Responding to a call >
1. Hands-free conversation may be made by simply
touc dialing t e station number you wis to call.
2. W en you wis to use t e andset, pick it up, t en
touc dial t e station number you wis to call, or
reverse t e order.
3. Start conversation after t e calling tone stops.
4. W en you ear a busy tone t at indicates t e party
you call is on anot er line, you can camp on t e line
by simply waiting. As soon as t e line becomes free,
your call is automatically connected.
5. In t e event t at t e party you are calling does not
respond and t e continuous calling tone is still eard
from your station, you can break in on t e calling
tone by continuously depressing t e key to
make a voice call t roug t e station speaker of t e
called party.
6. During ands-free conversation, w en t e person you
are talking to is in a ig noise level area,
(1) Pick up t e andset to talk or (2) depress t e
key continuously for one-way conversation
to t at party. As long as t e key is depres-
sed, your voice as dominance, and releasing t e
key will reverse t e one-way conversation
from t at party to you.
7. To terminate t e conversation, ang up t e andset
or depress t e key.
[In t e case t at t e Privacy switc is in t e OFF
position.]
8. Respond to call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
9. T e continuous calling tone function is made avail-
able to any station w en its Privacy switc is in
t e ON position. Depressing any key (
or ) ot er t an t e key or picking up
t e andset of t e station called causes t e continu-
ous calling tone to" stop and puts t e station in t e
conversation mode.
Note.
T e sound volume of t e loud speaker may be adjusted
by means of t e 2-stage volume selector (VOL) switc .
– 12 –

6) Hands-free / Handset Substat on Model HF-600S/610 PV Type
Handset
Speaker volume switc
Microp one
Loud speaker
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-600S
HF-610S
< Making a call >
1. For ands-free conversation, touc ing t e key
makes a call to t e designated ot er station w et er
t e Privacy switc on your station is in t e ON posi-
tion or OFF position.
2. W en you wis to use t e andset, pick it up, t en
touc dial t e key to make a call or reverse t e
order.
3. Start conversation after t e calling tone stops.
4. W en you ear a busy tone t at indicates t e party
you call is on anot er line, you can camp on t e line
by simply waiting. As soon as t e line becomes free,
your call is automatically connected.
5. In t e event t at t e party you are calling does not
respond and t e continuous calling tone is still eard
from your station, or w en t e station of t at party
is in t e Privacy mode and t e Privacy tone is sound-
ed, you can break in on t e calling tone by continu-
ously depressing t e key to make a voice call
t roug t e station speaker of t e called party.
6. During ands-free conversation, w en t e person you
are talking to is in a ig noise level area,
(1) Pick up t e andset to talk or (2) depress t e
key continuously for one-way conversation
to t at party. As long as t e key is de-
pressed, your voice as dominance, and releasing
t e key will reverse t e one-way conversa-
tion from t at party to you.
7. To terminate t e conversation, ang up t e andset
or depress t e key.
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
8. Respond to call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
9. A brief Privacy tone will sound from your station
eac time it receives an incoming call and all in-
coming calls are refused.
To respond, depress t e or key or pick-up t e
andset w ile t e line is still connected between your
station and t e station calling. T ese 2 busy stations
are, owever, automatically disconnected from t e
speec pat after approximately 10 seconds from call
establis ment if no response is made by you.
Note.
T e sound volume of t e loud speaker may be adjusted
by means of t e 2-stage volume selector (VOL) switc .
– 13 –

6) Hands-free / Handset substat on Model HF-600S/610S NP Type
Handset
Speaker volume switc
Microp one
Loud speaker
Speaker
In-use lamp
Privacy switc
Dial keys
key
HF-600S
HF-610S
< Making a call >
1. For ands-free conversation, touc ing t e key
makes a call to t e designated ot er station w et er
t e Privacy switc on your station is in t e ON posi-
tion or OFF position.
[In t e case t at t e Privacy switc is in t e OFF posi-
tion.]
2. W en you wis to use t e andset, pick it up, t en
touc dial t e key to make a call or reverse t e
order.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
3. Picking up t e andset makes a call to t e designated
ot er station.
4. Start conversation after t e calling tone stops.
5. W en you ear a busy tone t at indicates t e party
you call is on anot er line, you can camp on t e line
by simply waiting. As soon as t e line becomes free,
your call is automatically connected.
6. In t e event t at t e party you are calling does not
respond and t e continuous calling tone is still eard
from your station, you can break in on t e calling
tone by continuously depressing t e key to
make a voice call t roug t e station speaker of t e
called party.
7. During ands-free conversation, w en t e person you
are talking to is in a ig noise level area,
(1) Pick up t e andset to talk or (2) depress t e
key continuously for one-way conversation
to t at party. As long as t e key is de-
pressed, your voice as dominance, and releasing
t e key will reverse t e one-way conversa-
tion from t at party to you.
8. To terminate t e conversation, ang up t e andset
or depress t e key.
< Responding to a call >
[In t e case t at t e Privacy switc is in t e OFF
position.]
9. Respond to call after t e calling tone stops.
[In t e case t at t e Privacy switc is in t e ON posi-
tion.]
10. T e continuous calling tone function is made avail-
able to any station w en its Privacy switc is in t e
ON position. Depressing t e or key or picking
up t e andset of t e station called makes t e con-
tinuous calling tone stop and puts t e station in t e
conversation mode.
Note.
T e sound volume of t e loud speaker may be adjusted
by means of t e 2-stage volume selector (VOL) switc .
– 14 –

7) Hands-free / Handset Master Stat on w th Auto-D aler Model HF-660 PV Type NP Type
Handset
Registration mode switc
Privacy/In-use lamp
Privacy switc
key
Loud speaker
Auto-Dialer keys
Page selector switc
Entry key
Dial keys
Hands-free microp one
< Making a call >
1. Place t e auto-dialer registration (REGISTER)
switc in t e OFF position.
2. A maximum of 16 single digit dialing numbers includ-
ing station numbers, personal numbers and paging
zone number may be programmed into t e built-in
auto-dialer.
(16 registrations are possible wit 8 keys by c anging
over t e Page selector switc )
You can not only call any station by touc dialing
t e station selector key but also you can make a call
to up to 16 specific, pre-registered stations by depres-
sing t e station selector key or by single digit dialing
t e auto-dialer key of t is station.
Expansion of anot er 24 auto-dialer keys is possible
by connecting the AK-024 auto-dialer key unit to t e
HF-660M.
Note.
1. For programming t e auto-dialer, please refer to t e
operation manual of t e HF-660M.
2. T e sound volume of t e calling tone can be adjusted
by means of t e 3-stage selector (SP VOL) switc .
3. For instructions on ow to call and respond wit out
using t e auto-dialer, please refer to t e information
as to t e HF-600M/610M.
<How to make Registration at Auto-Dialer>
Reg strat on
mode
sw tch
Auto-Dialer
key
Dial Keys
(Max. 13 digits)
Entry
key
Reg strat on
mode sw tch
1. Place t e registration mode switc ( ) in t e
ON position.
A lamp turns to green and a confirmation tone is eard.
2. Place t e page selector switc in eit er or posi-
tion.
3. Press any one of t e auto-dialer keys (
), w ic is to be registered.
4. Register t e station or ot er numbers to be registered by
pressing t e dial keys ( ) A max-
imum of 13 digits on eac auto-dialer key may be reg-
istered
5. Press t e entry key ( ). T e confirmation tone
is again eard and registration is completed.
6. Repeat t e procedures described in (2) t roug (5) eac
time registration is made.
7. To cancel t e registration, press t e auto-dialer key
( ) and t e Entry Key ( ).
8. Place t e registration mode switc ( ) in t e
OFF position. T e lamp goes out and t e normal speec
mode will resume.
– 15 –

Funct ons: EXES-6000 CP-64
No. Classification
Automatic Line Release
Camp-On-Busy
Mic-Off
Single Digit Dialing
Automatic Access to Paging
Master/Sub Relations ip
Privacy • Camp-On-Privacy/Continuous Calling Tone * 1
at Privacy Mode
Continuous Calling Tone • One-touc Response *2
Press-To-Talk
Press-To-Talk Control
Personal Number Call
Personal Number Paging
Remote Response
Call Transfer • Paging during Normal call
Group Hunting
Secretary Transfer
Call Forwarding
Priority
Executive Priority
Hig est Executive Priority
Conference
PA Paging • Station Paging
All-Call +31 zones (Single Exc ange)/30 zones (2 Exc anges)/
45 zones (3 Exc anges) *7
Combination Paging
Emergency All-Call
Paging Priority
Selectable First Station Number of Eac Exc ange
No. 100/200/300/400/500/600/700/800/900
Output Capacity of Paging Zone
Selectable Dial Operation for Paging Response
Output Capacity of General Purpose Control
Programmable Station Numbering
Group Blocking (Restricted Dialing)
Restricted Access to All-Call Paging
Restricted Access to Conference
Restricted Access
to
General
Purpose Control
One-s ot make output
Make/break output
8 selectable one-s ot make output
8 selectable make output/Decimal output
4 decimal digits output
Calling Tone • Paging Pre-Announcement Tone Duration *11
Time out of Conversation and Paging Call
IN/OUT Annunciation
Destination Annunciation Indication
Calling Party Indication (Lamp type) (wit /wit out memory)
Calling Party Indication (Numerical type)
Pager (make output type)
General
Purpose Control
One-s ot make output
Make/break output
8 selectable one-s ot make output
8 selectable make output/Decimal output
4 decimal digits output
Single Digit
Continuous
Calling Tone
PTT
Personal
Number
Transfer
Priority
Conference
Paging and
Response
Selection of
Dial
Operation
Restricted
Access
Selection
Interface
Function Standard
Function
Selectable Function
By DIP
Switc
By No. 200
Programming
Optional
Function
Single
Exc ange
Tie-line
Own
Exc ange
Outside
Exc ange
– 16 –

Funct ons: EXES-6000 CP-64
Notes.
1. XX/YY indicates to select eit er XX (Function) or
YY (Function).
2. Not all circles ( ) in T e Switc Selection table
correspond to t e DIP switc es of t e CP unit.
*1: "PV" (system wit Privacy function) Type: wit t e
Privacy switc in t e ON position, a brief Privacy
Tone sounds.
"NP" (system wit out Privacy function) Type: A
station may be called by t e continuous calling tone
w en t e Privacy switc is placed in t e ON position.
*2: W en a ands-free station wit out andset is called
by t e continuous calling tone, conversation may
start by touc ing any key
*3: Using t e Press-to-talk control function reduces t e
maximum number of paging zone to All call + 23
zones.
*4: T is function may not be used if numbers 100
t roug 199 are used in t e Station Numbering
Sc edule. Eit er "Personal number call" or "Personal
number paging" may be selected.
*5: Additional equipment is required for paging.
*6: Eit er "Executive Priority" or "Hig est Executive
Priority" may be selected.
*7: Eac zone of paging provides Station paging and/or
PA paging.
*8: It is necessary to respond only by touc ing
(wit out zone No.).
*9: It is possible to make a paging and its response across
t e ot er exc ange. However, a response to t e zone
paging is possible only from a station connected to
t e exc ange aving t e paged zone.
*10: Station numbers of eac exc ange can be c anged
freely wit in t e range of "Selectable numbering
sc edule of eac exc ange".
*11: Calling tone: 0.3 sec (Trill note tone)/0.2 sec (Single
note tone)/none.
Paging pre-announcement tone: 2 sec/1 sec/none.
*12: Selects w et er or not t e indication of t e calling
party station continuously lig ts up, after t e calling
party as cancelled t e call to a line w ic is busy or
in t e privacy mode.
*13: A call can only be made from t e stations No. 200
~ 455 connected to t e "A" type exc ange. It is
possible to respond from any station.
– 17 –

C apter 2
Functions and operating procedures
of single exc ange system for
a maximum of 256 stations