Amroad DP100 User manual

AMROAD DP100
COMMUNITY STATION
~
Technical Manual

AMROAD DP100
Contents
Contents.......................................... i
Preface.............................................1
Front Panel ..................................... 2
Basic Operation .............................. 3
RFID Card Usage .............................4
Issue RFID Master Card ............................ 4
Issue New Card ......................................... 4
Functions Performed by the IP-PBX 5
Simultaneous Ring ................................... 5
Call Forwarding ........................................ 5
E-Mail/Voicemail Notification................. 5
Web UI............................................ 6
Search Tool............................................... 6
WEB UI login............................................. 6
Outline of WEB UI Settings ............. 7
System............................................ 8
Basic Settings ........................................... 8
Network Setting ......................................10
Login Name...............................................11
Reboot ......................................................11
Streaming Settings ........................12
Video ........................................................ 12
Audio........................................................ 14
SIP Settings....................................15
Entrance Settings...........................17
Extensions ............................................... 17
GPIO.........................................................19
RFID......................................................... 20
Upgrade .........................................21
Update ..................................................... 21
Configurations.........................................22
AR APS .....................................................23
IO Application .............................. 24
Electric Bolt ............................................ 24
Electric Strike...........................................25
Regulations and Safety Precautions26
FCC Statement ....................................... 26
FCC Radiation Exposure Statement ...... 26
EC Directive Compliance Statement..... 26
Contents
i

Preface
Welcome
Thank you for choosing this Video Door Phone.
This DP100 is designed to co-work with IP Video
Phone to compose a SIP based door entry
system.
Besides taking advantages of IP technologies,
this device links to other SIP devices. It will
work with most IP PBX systems supporting
audio and video, and it can be configured via a
web interface (WEB UI).
Certificates, Certify your safety
AMROAD full range products passed European
CE, USA FCC, BSMI/NCC Taiwan. All these
certificates promise tenants a harmless
modern living environment.
No electronic devices will be interfered with
this product.
Main Features
Talk to visitors with real time video and
voice on IP Video Phone or Video Indoor
Station.
Open electronic door by indoor IP Video
Phone or RFID card reader.
Support SIP (Session Initiation Protocol)
VoIP services, it is able to forward visitor
calls to your mobile phone or office
phone.
Build-in electronic door opener interface.
Build-in speaker and microphone.
Web user interface for configuration and
management.
NOTICE
The default of this device is DHCP. If you need
to set Static IP, please reference Reset Button in
Installation Manual.
The device will be switched to the static IP
mode and reboot itself when the user has
pressed the reset button for 3 seconds. IP is
"192.168.0.50".
Preface
Introduction

AMROAD DP100
Front Panel
Front Panel
2

AMROAD DP100
Basic Operation
Key in the extension number of the called
party.
Press “OK” button to make this call.
You will see “Calling” on the LCD display
and then bell sound (Ding-Dong)
continually ring until receiving response.
You will see “Talking” on the LCD display
when this call is answered.
When call is hang up by receiver, LCD
display will show “Hanging Up”.
If called extension number is occupied,
the bell sounds a busy announcement.
If there is no one answering this call, the
bell sounds (Ding-Dong) will continuously
ring and be discounted automatically
after 15 seconds.(The time out can be set
at Web for 15 ,30 , 45 and 60 seconds).
You will see “Disconnected” message on
LCD display if the networking is
disconnected.
Basic Operation
3

AMROAD DP100
RFID Card Usage
Residents scan RFID card over the card reader.
DP100 will verify the database to determine
whether to Open door or not.
Issue RFID Master Card
If AMROAD DP100 have not set the Master
card yet, you can use an RFID card swipe
become Master Card. We recommend that
after the installation is complete, brush on this
card to complete the opening card and produce
Master RFID cards, and you should keep it safe.
If you would like to reset a new Master Card,
please return to the factory default.
Issue New Card
Scan Master RFID Card on DP100 card
reader First.
The screen will display “Scan New Card”.
Within 10 seconds, scan new RFID card on
DP100 card reader and LCD Display will
show the card number of the RFID Card.
DP100 will store new card number into
database.
The new RFID card is authorized and can
be used to scan over DP100 card reader
and open door.
RFID Card Usage
4

AMROAD DP100
Functions Performed by the IP-PBX
Simultaneous Ring
The Distribution Policy is set to Ring All. e.g.
When a visitor calls the group call (say
extension 500), group members (say
extensions 155, 157, and 166) will all ring
simultaneously.
Call Forwarding
Enter a number to which incoming calls are
forwarded when unanswered. The number
could be an extension or a PSTN number with
appropriate outbound prefix.
E-Mail/Voicemail Notification
IP PBX has a built-in voice mail subsystem with
a sophisticated IVR menu. A call to an
extension unanswered could be configured to
enter voice mail recording procedure. After
leaving a message, a notification e-mail will be
sent to the user.
Functions Performed by the IP-PBX
(Compatible with A
MROAD IP-PBX)
5

AMROAD DP100
Web UI
Search Tool
The default connection setting type of this
product is “DHCP Client”, it is a typical network
mode.
You can use AMROAD Configurator that we
supplied. This software utility provided by your
local distributor or local dealer which is able to
help you to find your Community Station when
using dynamic IP address.
When this application starts, Search Tool will
search all the AMROAD products automatically
in the same network. Choose the device which
you want to set, click on the right, and
Login Page will show.
WEB UI login
In addition to search the device by Search Tool,
you can input IP on browser, and Login Page
(WEB UI) will show as below.
WEB UI has protected by Login ID and Password.
Input correct ID and password, click “Login”
bottom and get into WEB UI. The detail setting
information will describe next page. Default ID
and password are “a d m i n”.
NOTICE：
1. While configuring WEB UI (User Interface),
please do not operate this product so as
to prevent this product being out of order.
2. Do not input special symbols “, \, and & in
the fields on the WEB UI. Otherwise, you
may fail to save your setting normally.
3. After configuring some Web pages and
pressing “SAVE” button, you need to wait
a little longer for system to save the
configuration.
Web UI
6

AMROAD DP100
Outline of WEB UI Settings
System
Basic Setting
Network Setting
Login Name
Reboot
Streaming Settings
Video
Audio
SIP Settings
Authentication
SIP Proxy
SIP Registrar Server
Entrance Settings
Entrance
GPIO
RFID
Upgrade
Upgrade
Configurations
Number Entry Configure
Have Your Own Home Screen
AR APS
IO Application
Electric Bolt
Electric Strike
Outline of WEB UI Settings
7

AMROAD DP100
System
Basic Settings
Device ID：Device ID that assigned by
manufacturer.
Date & Time：Here shows date and time
set on this video door phone.
Set New Date & Time：These fields allow
user to set correct date and time
according to the local–standard. You may
synchronize phone time to match your PC
by pressing “Sync with PC” button.
Time Zone：This field allows you to select
your time zone to fit your location. You
can enable the Daylight-Saving feature if
needed.
Daylight Saving Time is a way of getting
more light out of the day by advancing
clocks by one hour during the summer.
Network Time Protocol：Enable NTP
Calibration service to allow the system to
calibrate the time with NTP server
through Internet.
NTP Server Address：You may use your
preferred NTP server by input new address
here.
Auxiliary Light：This item allows you to
control keypad lighting device.
System
8

AMROAD DP100
Sleep Mode：When you enable this
function, the keypad will not light during
following time period except when any
keypad is pressed.
Start Time：You may set Start Time for
each day.
End Time：You may set End Time for each
day.
Notice Ticker：Enable this feature to show
“Please Press OK to Operator!” in the LCD
screen by setting “Mapping Number” in
Web “Extension number” page in
advance.
Back Light Open：Select “On” to turn on
the Back Light of the LCD always. Select
“Off” to turn on the Back Light when any
keypad is pressed.
Language：This feature allows you to
select the display language on the LCD
screen. Select “English” or “Traditional
Chinese”.
Reboot Password：This feature allows you
to reboot the DP100. When you are
pressing “CLEAR” button for 15 seconds,
you get the “Input Password” indicator
then input the password and press OK
button. Default password is “1234”. And
further, the feature also allows you to
turn IP-Type into the Static IP
(192.168.0.50) for debug/setting purpose.
The process is same as the previous one,
only the password is different; you need
add “00” in the ending for password
checking. I.e. Default password is
“123400”.
Save：Click this button to save your
setting.
System
9

AMROAD DP100
Network Setting
MAC Address：This is a quasi-unique
identifier attached to most network
adapters.
IP Type: The default value is DHCP Client.
DHCP Client：The system will
automatically assign you an IP address.
Static IP: You have to input IP address,
Subnet Mask, Default Gateway, Primary
DNS and Secondary DNS data.
Save Click this button to save your
setting.
System
10

AMROAD DP100
Login Name
The default ID and password for system login
are admin and admin.
User may change his Login ID and Password on
the webpage by entering new Login ID and
Password.
Reboot
When user needs to reboot DP100 remotely,
just click “Reboot” button on this webpage to
start this action. After confirm rebooting, Web
User Interface will back to the home page, but
the video door phone may take 30~60 seconds
to restart its system.
NOTE: DO NOT operate the DP100 while
system is rebooted (reset).
System
11

AMROAD DP100
Streaming Settings
Video
Bandwidth：Select preferred bandwidth
for video and audio streaming. There are 4
options: 128Kbps, 256Kbps, 384Kbps, and
512Kbps. Please check which bandwidth is
suitable for you with your service provider.
Codec Priority：
First－Codec - H.263；
Second－Codec - H.263 or Disable.
Streaming Settings
12

AMROAD DP100
Power Line Frequency：You may select the
power frequency according to your local
power specifications. Wrong power
frequency may cause the video flicking
abnormally. Default setting is 60Hz.
CMOS Static Brightness：This item allows
you to adjust the brightness of CMOS
according to the lighting environment of
the installed location. Higher value makes
the video brighter. When it set 2, it means
automatic detection.
CMOS Color Balance：This item allows
you to adjust the color of video. Select
according to the lighting environment：
Fluorescent Light, Yellow Lamps and
Orange Lamps. DP100 can’t get the
correct value of the CMOS brightness in
some environment, please adjust the
brightness value via the AMROAD IP Video
Phone by pressing “2”(brighter) or
“8”(darker) in conversation state.
Save：Click this button to save your
setting.
Streaming Settings
13

AMROAD DP100
Audio
Code Priority：Select the Audio streaming
priority – G.711/G.729 and G.729/G.7111.
Scene：Choose AEC (Acoustic Echo
Control) according to the lighting
environment of the installed location.
Select Disable, Enable or User Define.
When “User Define” is selected,
recommend not to modify. The following
two items appears：
Noise Threshold (db)：Default is -40 .T he
voice intensity that is lower than the
value (-40db) will be neglected.
(Acceptable value -40~-52).
Target Level (db)：Default is -23. The voice
intensity that is around normal intensity
will be processed to be the value (-23db).
(Acceptable value -20~-32).
VAD：You may enable or disable
Voice-Active-Detection function here. The
AMROAD XL will detect background noise
and send silence packet to the other end
if this feature is enabled. This allows
called party to hear better audio quality.
CNG：You may enable or disable
Comfortable-Noise-Generate function
here. The DP100 will generate background
noise when receiving silence packet from
the other end if this feature is enabled.
This allows called parties hear better
audio quality.
Speaker Volume：This item allows you to
select volume of speaker. There are 10
levels, 0 ~ 9.
Save：Click this button to save your
setting.
Streaming Settings
14

AMROAD DP100
SIP Settings
Authentication
Display Name：Name, Recommendations
input doorphone.
NOTE: Please enter Doorphone in the field of
Display Name. When the Door Bell is pressed,
there will be “Preview” function and Doorbell
sound on AMROAD IP Video Phone/Video
Indoor Station.
Assign the following information provided by
the switch：
User Number：Extension Number. For
example, doorphone.
Account ID：You may fill in your account
name of SIP service in this field. For
example, 103.
Account Password：You may fill in the
password of your SIP service account. For
example, 103.
SIP Settings
15

AMROAD DP100
SIP Proxy Server
Service：Select “Enable” or “Disable” the
SIP Proxy Server in the dropdown menu.
IP Address：Fill in the IP address of SIP
Registrar Server here.
NOTE：To enable the Peer-to-Peer mode, the
device selects Disable (Close) SIP Proxy Server.
SIP Registrar Server
IP Address：Fill in the IP address of SIP
Registrar Server here.
Registration Expire Time：Set the time for
SIP registration authorization. Default is
3600 seconds.
Media Timer (0~180)：This setting allows
your phone to force release automatically
a conversational call when your phone
doesn't receive any media packets from
the remote side during a period of time. If
you want to disable this feature, please
fill in "0" sec.
No Answer Timer：When visitor presses
the door bell and no one answer the call,
the bell sounds (Ding-Dong) will
continuously ring for a time period. You
may select the time period- 15sec, 30sec,
45sec, or 60sec. Default is 15 seconds. The
setting should be based on your IP PBX.
ICMS：Engineering mode.
Save：Click this button to save your
setting.
SIP Settings
16

AMROAD DP100
Entrance Settings
Extensions
You may configure call services in this page.
Mapping Number：Select “Enable” to
allow you use a real house number
instead of extension number assigned
from IP PBX. For large community, it is
easier for visitors to enter the real house
numbers than extension numbers.
Save：Click this button to save your
setting.
Select Mapping File：Once you enable the
Mapping Number feature, you may
import the mapping table from this field.
You may edit the mapping table in
WordPad or Notepad, and then save as
“csv” format. The format must match
following style; otherwise the firmware
may not recognize these data.
Export Mapping File：This item allows you
to export existing mapping file (*.CSV)
from DP100. The exported mapping file
may be a good example for you. Press
“Export” button to start exporting
existing mapping file and save on your
computer.
門口機設定 Entrance Settings
Entrance Settings
17