Toa F-505 User manual

Instruction Manual
PROFESSIONAL SOUND SYSTEM
Speaker Systems
F 505W F 505G
F 605W F 605G
Features
1. The Toa F 505W and the F 505G are 2 way tuned port speaker systems consisting of a 8"
high power woofer and a CD (constant directivity) horn tweeter coupled to a high efficiency
driver.
2. The TOA F 605W and the F 605G are 2 way tuned port speaker systems consisting of a 12"
high power woofer and a CD (constant directivity) horn tweeter coupled to a high efficiency
driver.
3. These highly durable lightweight speakers have been designed with an emphasis on accurate
sound reproduction. They offer ease in both mobility and installation and can be used for a
wide variety of applications.
4. The Constant Directivity (CD) Horn assures a uniform, well controlled dispersion pattern
60° Horizontal × 40° Vertical, within specified frequency response.
5. The modern, compact speaker enclosure is made of a low foam polypropylene resin that
provides precise acoustic characteristics and is extremely durable.
6. Push in terminals and phone jacks are provided for inputs. It is also possible to change the
phone jack into an XLR connector.

Specifications
F-505W/F-505G
Enclosure:
Low foam polypropylene, tuned port bass reflex design
Speakers
High Frequency: Constant Directivity Horn coupled to a
compression driver
Low Frequency: 8" high power
Power handling capacity
ontinuous Pink Noise:
80 watts RMS of band limited pink noise
(40 Hz to 20 kHz)
ontinuous Program:
240 watts
Nominal impedance:
8 ohms
Sensitivity:
93 dB (1W/1m)
Frequency response:
70 Hz — 20 kHz
rossover frequency:
3 kHz
Input terminals:
1/4" phone jack × 2; also, Push in terminals
olor:
Ivory (F 505W)
Dark Grey (F 505G)
Dimensions:
11.1(H)×17.8(W)×9.1(D)inches
282(H)×452(W)×231(D)mm
Weight:
Approx. 16.5 Ibs (7.5 kg)
F-605W/F-605G
Enclosure:
Low foam polypropylene, tuned port bass reflex design
Speakers
High Frequency: Constant Directivity Horn coupled to a
compression driver
Low Frequency: 12" high power
Power handling capacity
ontinuous Pink Noise:
120 watts RMS of band limited pink noise
(40 Hz to 20 kHz)
ontinuous Program:
360 watts
Nominal impedance:
8 ohms
Sensitivity:
98 dB (1W/1m)
Frequency response:
65 Hz — 20 kHz
rossover frequency:
2 kHz
Input terminals:
1/4" phone jack x 2; also, Push in terminals
olor:
Ivory (F 605W)
Dark Grey (F 605G)
Dimensions:
15.4(H)×21.7(W)×10.6(D) inches
392(H)×552(W)×270(D) mm
Weight:
Approx. 37.5 Ibs (17 kg)
* Specification are subject to change without notice.
Rear Mounted Input Protection ircuitry
Push-in terminals
1/4" phone jacks
High-Frequency Level ontrol
Push in terminals and phone jacks (2 each) are all in
ternally connected in parallel with each other.
When using an XLR connector, remove the jack panel
and fit the XLR connector in the resultant opening.
Adjust the tweeter's sound pressure level with this con
trol, as necessary.
(F 605W, F 605G only)
These speaker systems have individual protection cir
cuits that will protect the woofer & tweeter from over
load. When the protection circuitry is activated, the
input power to the woofer will be automatically at
tenuated by 15 dB and the tweeter will be discon
nected.
When the output level of the woofer or tweeter sudden
ly drops because the protection circuitry has been ac
tivated, immediately turn down the amplifier volume and
wait until the circuitry automatically resets (from about
2 to 20 seconds).
Then you may resume using the speaker after adjusting
the volume to a lower level.
Frequency Response
1W/1m: Swept 1/3 octave pink noise
F-505W/F-505G
F-605W/F-605G
High frequency level control setting: "0dB"
133-01-355-50

Please see the reverse side for English manual.
F 505W F 505G
F 605W F 605G

F 505W/F 505G
F 605W/F 605G