Tokenworks IDWedgeBT User manual

IDWedgeBT® Quick Start Guide
Contents of Box:
1.) IDWedge BT Scanner
2.) USB Cable
3.) 12V Charger
IDWedge BT Interface
1. Power Button
2. Battery Level Button
3. Battery Status LEDs
4. Function/Keyboard
Button
5. BT Connection Status
LED
6. 2D Barcode Slot
7. Magnetic Stripe Slot
8. Green Power LED
9. 12V Charging Jack
10. RJ50 Jack

Quick Start Guide Page 2 of 7
Charging the IDWedge BT
Charge scanner
before first use.
Only use the supplied
power supply, other
power supplies may
damage unit.
Charging is complete
when battery meter
reads 5 solid blue
bars.
The battery should
last about 8 hours
with no scans and
about 6 hours under
constant use.
A charging cycle
should take about 4-
5 hours from empty.
Note: Scanner will power on if
connected by USB cable but this
will not charge the internal
battery

Quick Start Guide Page 3 of 7
Pairing the IDWedge BT with an iPad
To pair the IDWedge BT with
your iPad:
1. First go to Settings -> General.
2. Turn on Bluetooth.
3. IDWedge BT will show up under
“devices”as “not paired”.
4. Tap on IDWedge BT and the
connection will become “paired”.
5. Navigate to a web page (e.g.
www.idscanner.com/idwedgebt.htm)
using safari and tap the screen to put
the cursor on the first field you want
to be filled.
6. Now you can scan a card.
Pairing your IDWedge BT with an Android Device
To pair the IDWedge BT with
an Android device:
1. Go to Settings, then Wireless
and networks, then Bluetooth
settings.
2. Your phone will search for
devices.
3. You'll see an entry under
"bluetooth devices," go
ahead and click on the
IDWedge BT device.
4. You should pair
automatically.
5. You are now ready to scan a
card.

Quick Start Guide Page 4 of 7
License Data Stripe Technology
The ID Scanner reads 2D barcodes as well as magnetic stripes. This section
explains how to recognize which one is on the driver’s license.
If a license has both, we suggest you scan the 2D barcode first and then the
magnetic stripe to verify the information on the screen is the same from both.
Note: The scanner does NOT read 1D barcodes because ALL states have either
a 2D barcode or magnetic stripe.
MILITARY IDS
To Scan Military IDs, ONLY SCAN THE 2D BARCODE.
Do NOT scan the 1D barcode or magnetic stripe.

Quick Start Guide Page 5 of 7
How to Scan or Swipe A License
2D Barcode Scanning:
For states like New
York with 2D barcodes,
and Military ID’s, insert
the barcode facing the
slot as shown.
Dunk down completely
and then remove.
Scanner will beep,
indicating it has
successfully read the
information on the
card.
Magnetic Stripe Swiping:
For states like
California with a
magnetic stripe, swipe
the license with the
magnetic stripe facing
the slot as shown.
Scanner will beep,
indicating it has
successfully read the
information on the
card.

Quick Start Guide Page 6 of 7
Configuring the IDWedge BT: Changing the Formula
To change the
formula, you must
gain access to the
formula files on
the SD card inside
the IDWedge BT.
To do this:
Turn the unit off.
While the unit is
turned off, hold
the battery button
down and connect
the USB cable
from the PC to the
IDWedge BT.
Wait 5-7 seconds,
or until you hear
the triple beep,
then release the
battery button.
The device should
now appear as a
new storage
device in the My
Computer section
on your PC.
See user manual for details on configuring unit

Quick Start Guide Page 7 of 7
TokenWorks
TokenWorks provides the IDWedgeBT scanner to automate and document the ID scanning process using a wireless
Bluetooth connection to the host device. The IDWedgeBT scanner can read 2-d Barcodes, and Magnetic ID cards, as
well as credit cards and other Magnetic Cards.
3511 Silverside Rd, Suite 105
Wilmington, DE 19810
Phone: [phone]
www.IDScanner.com - Product Information
[email protected]om
www.TokenWorks.com - Company Information
Revision: 1.0 July 2012