Tommy Swiss BP204 User manual

BP204 bed frame installation guide

Join the 4 sides of the bed together as shown
• Attach the 4 sides together by hooking the sides using the golden brackets
• Tighten using the screws

Fix the middle support beam
• Attach the middle beam supporter bracket to the middle of the headboard and footboard
• Position middle beam on top of the support bracket
• Attach the support feet underneath the middle support beam

Attach all the wooden slats
• Attach all the wooden slats
• It is recommended to join the wooden slats
with the plastic clips before inserting into the
metal railings
• Push down and lock all the slats in place
• If the holes are tight, it is recommended to use
a hammer or heavy object to tap into place

Place 4 corners under the bed frame
• Use the long bolt to slide through the centre of the
corner legs
• Insert long bolt through the leg and tighten under the
corners of the bed frame
• You may need to lift the bed frame when installing the
corner legs