Courtyard Creations TMS21LE User manual

PARTS LIST
PART
NO. DESCRIPTION PART Q’TY PART NO. DESCRIPTION PART Q’TY
1 1
2
3
5
7
8
2
1
1
4
1
TABLE TOP
LEG
SUPPORT 1
BOLT M6*35
FIGURE 1
2
1
52
Step 1:
Place the table top (#1) onto a non-abrasive surface, such as a
carpet, with its underside facing upwards. Fasten the legs (#2)
to the underside of the table top (#1) rim by using bolts (#5).
Keep the bolts loose. See Figure 1.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Note:
The arrow marks on the legs (#2) should coincide with Figure 1
to ensure proper assembly.
6 4
17C40A0705001YX
17KAA0101----Y4
17KAC3101----Y3
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TMS21LE
TMS21LE-CS05-1
TMS21LE-CS04-1
TMS21LE-CS09-1
17C02A0712001YX
HEX. KEY
WRENCH 4MM
BOLT M6*15
4 1
SUPPORT 2
62TMS21LEQ101 HEX. KEY
WRENCH 10MM
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
PAGE 1 OF 2
E-2
#5 BOLT M6*35
35

E-2 PAGE 2 OF 2
FIGURE 2 FIGURE 3
FIGURE 4 Step 4:
Turn the table to its upright position. See Figure 4.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly,
and dry completely. Do not use bleach, acid, or other solvents
on the frame parts.
• Inspect and tighten all bolts and fasteners on a regular basis
to ensure the proper performance and safety of your table.
• When moving the table, lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we
recommend that it be stored in a dry and protected area
during off season periods.
2
2
6
#5 BOLT M6*35
Step 3:
Fasten the supports (#3 and #4) to the underside of the table
top (#1) rim by using bolts (#5). Make sure that all of the bolts
have been tightened completely. See Figure 3.
4
3
5
3
1
1
3
Step 2:
Fasten the supports (#3 and #4) to the legs (#2) by using
bolts (#6). Keep the bolts loose. See Figure 2.
Note:
1. The arrow marks on the supports (#3 and #4) should
coincide with Figure 2 to ensure proper assembly.
4
#6 BOLT M6*15
15 35
Warranty
• This product is covered by Courtyard Creations Inc.'s. one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’s responsibility for freight and packing charges to and from the service center.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS,MAKING SURE THAT
YOUHAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.