Tommy Swiss 3010 Series User manual

Confidential
3010 series bed frame installation guide

Confidential
Join the 4 sides of the bed frame
• Attach 2 square brackets with the screws provided in each corner
• There should be 8 square brackets joining the sides
• Make sure not to fully tighten until final position is locked in
The four corners of the bed frame are joined using 8 square brackets

Confidential
Attach middle support beam and legs
• Attach the middle horizontal beam to the headboard and footboard
• Use the screws provided to lock the bar in position
• Position support legs for the middle beam

Confidential
Fit in the slats and position plastic feet
• Attach plastic caps to the slats, and position across the bed frame
• Queen sizes will have 1 support beam, whereas king sizes will have 2 support beams
• Once completed, lift the bed to position the plastic feet in the corners of the bed
And your bed frame is now ready for use!