Tommy Swiss M211 BASE User manual

M211 BASE installation guide

BASE Parts List – 1 of 2
2 x Middle Beam Support Bar
Brackets (4 for King Size)
4 x Corner Rectangular Brackets
2 x Support Legs (4 for King Size)
4 x Corner Triangle Brackets

BASE Parts List – 2 of 2
20 x Medium Bolts
4 x Long Bolts & Nuts for Support
Legs (8x for King Size)
10 x Long Bolts for Side Bar, 2 x Long
Bolts for Middle Support Beam
16 x Short Bolts

Join the 4 corners with the 2 brackets
use shortest bolts for side panel, and medium bolts for end panels

Place the wooden leg underneath the triangle

Attach long metal bar on each side
use 5 longest bolts to join the bar to the panel

Attach long middle bar onto of bracket as shown
use 1 longest bolt on each end to secure tight

Attach support legs underneath the middle beam
use 2 longest bolts with round nuts supplied

Insert all the wooden slats via plastic clip holders
Connect the plastic clips to the wooden slat pieces
Once all the plastic clips are attached to the wooden slats,
push down onto the beams to lock in place
Place metal support legs
underneath the middle
support beam, and fix
using the long bolts and
nuts provided