Tommy Swiss 105 Series User manual

Confidential
105 series bed frame installation guide

Confidential
Join the 4 sides of the bed frame
• Attach 2 square brackets with the screws provided in each corner
• There should be 8 square brackets joining the sides
• Make sure not to fully tighten until final position is locked in
The four corners of the bed frame are joined using 8 square brackets

Confidential
Connect the side metal bar onto the bed side
• Attach the long metal bar onto the actual bed side using the screws provided
• Make sure not to fully tighten until final position is locked in
• Ensure square white brackets are secured before attaching the side metal bar
The 2 metal bars will need to be attached to the 2 bed sides as shown above

Confidential
Fix the support legs to the middle beam
• There should be 2 ‘T’ shaped support legs that support the middle beam
• Use 2 screws to lock in each ‘T’ shaped support leg
The 2 ‘T’ shaped support legs need to be attached to the middle beam

Confidential
Fix the middle beam to the head and foot board
The middle support beam needs to be attached from the middle of the head and foot board
Attach to head board Attach to foot board

Confidential
Attach plastic holders to the wooden slats / fix
the slats across the bed frame
And your bed frame is now ready for use!
Attach plastic holders Fix slats across bed