Tommy Swiss 5073 Series User manual

Confidential
5073 series bed frame installation guide

Confidential
Join the 4 sides of the bed frame
• Attach 2 square brackets with the screws provided in each corner
• There should be 8 square brackets joining the sides
• Make sure not to fully tighten until final position is locked in
The four corners of the bed frame are joined using 8 square brackets

Confidential
Connect the metal feet to the foot board
• Attach the metal feet onto the end of the foot board with screws
• 1 metal foot per footboard
• Ensure it is locked in first time round, as any subsequent movements will not make it as
strong
• Electric screw driver recommended for this

Confidential
Fix the support legs to corners of inner slat frame
• There should be 1 support feet in each corner of inner slat frame
• Unscrew the screw from the feet, and position in corner before rescrewing
These 4 support legs go in each corner

Confidential
Attach support feet and place into bed frame
And your bed frame is now ready for use!
• Attach support feet for middle beam
• King size will have 2 support beams
• Queen size will have 1 support beam
• Place inner slat frame into completed bed
frame