Topcon RC-5 User manual

Why reset the RC-5?
In the event that the Topcon RC-5 remote will not pair with a total station or Bluetooth communication
is problamatic, reseting the RC-5 initializes the Bluetooth module, returns all parameters to default and
resets pairing. The serial number and Bluetooth module power settings remain unchanged.
What you will need
RC-5 to be reset with a charged battery.
Resetting the RC-5
While holding the FAR button and the SEARCH button, press the POWER button to switch the RC-
5 on. Release the POWER button and continue holding the FAR and SEARCH buttons for about 10
seconds until the beep sounds 3 times. Then release both buttons.
Press and hold the FAR button for about 10 seconds. When the beep sounds several times release
the button. The two com LEDs will be lit and the FAR and SEARCH LEDs will blink while the RC
Keywords
PS Series, RC-5, DS Series, SX Series, bluetooth,
DX Series, Pairing, reset
RC-5 - Performing Reset
RC-5 - Performing Reset
TopconTotalCare.com ©2014

the button. The two com LEDs will be lit and the FAR and SEARCH LEDs will blink while the RC
unit performs the reset. The beep will sound several times follows by a short pause and another
single beep. This signifies the operation is complete and the RC will automatically return to normal
functioning.
Turn off the RC-5. It is now ready to be paired to a total station.
Included Images
View the full-size images at the Topcon Totalcare site.
RC-5 - Performing Reset
TopconTotalCare.com ©2014