TopflyTech TSTH1-B User manual

TOPFLYtech TSTH1-B
Wireless temperature and humidity sensor
User Manual
Revision 1.1

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 2
Thanks for your purchasing of the high-quality IOT sensor from TOPFLYtech. Please read this user
manual carefully before installation and operation. Information in this manual is the property of
TOPFLYtech. Changes to the specifications and features in this manual may be made by
TOPFLYtech without prior notice. No part of this manual could be reproduced, copied, translated,
transmitted, or published in any form or by any means without TOPFLYtech's prior written
permission.
The sensor is using Bluetooth 5.0 technology and could detect temperature, humidity, light
intensity then transfers them via the BLE network to the tracker/Phone. It provides the customer
with a cost-effective, efficient and safe environment remotely monitory method. It has been widely
used in commercial cold-chain transport/storage and other segments.
TSTH1-B

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 3
Contents
1. QUICK REFERENCE ..............................................................................................................................4
2. PRODUCT SPECIFICATIONS..............................................................................................................4
3. INITIATE UNIT GUIDE.........................................................................................................................5
3.1 HOW TO POWER IT .........................................................................................................................................5
3.2 HOW TO CONNECT IT WITH YOUR PHONE....................................................................................................5
3.3 HOW TO UPDATE THE FIRMWARE OF THE SENSOR.......................................................................................5
3.4 HOW TO CONFIGURE IT WITH YOUR PHONE.................................................................................................6
3.5 HOW TO CONNECT IT WITH TOPFLYTECH TRACKER ..................................................................................6
3.6 HOW TO CONNECT IT WITH THE THIRD-PARTY BLUETOOTH DEVICE .........................................................7
4. QUICK TROUBLE SHOOTING............................................................................................................7
4.1 THE APP SHOWS “LOADING”ALL THE TIME.................................................................................................7
5. WARRANTY AND STOCK ..................................................................................................................7
6. BASIC......................................................................................................................................................7

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 4
1. Quick Reference
2. Product Specifications
General Specifications
Model Name
TSTH1-B
Waterproof
IP65
Dimensions
69.75*52.6*19.8mm
Weight
35g (Battery Include)
Battery
Replaceable CR2477 Battery (900mAh)
Battery Life
(Depends on Period Setting)
Up to 8 Years
(60 Min Uploading Period)
Temperature Environment
(for Battery Only)
-30℃ ~ +60℃
(-22°F ~ 140°F)
Operating Temperature
-40℃ ~ +85℃ (-40°F ~ 185°F)
Temperature Measurement Accuracy
±0.2℃(Long-term drift Typ. <0.02 °C/y)
Humidity Measurement Accuracy
±2%RH (Long-term drift Typ. <0.25 %RH/y)
Power Output
+4 dBm
Transmission Range
Up to 300m (Open Field)
Others
Front Light Sensor
2.1 Temperature & humidity Sensor Performance Graphs
TSTH1-B

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 5
3. Initiate Unit Guide
3.1 How to power it
3.1.1 Open the case of sensor.
3.1.2 Remove the belt from the battery.
3.1.3 Close the case.
3.1.4 Remove the sticker from the top.
3.2 How to connect it with your phone
3.2.1 Download the application called “TFTBle” from Play Store.
3.2.2 Turn your phone the feature Bluetooth on.
3.2.3 Run the “TFTBle” and allow all the permissions it needs.
3.2.4 Find the device named “TSTH1-B”.
3.3 How to update the firmware of the sensor
3.3.1 Click “Config” button.
3.3.2 If there is available latest version, it will show you a pop notice.
3.3.3 “Confirm” it to update the firmware.
3.3.4 Waiting for some minutes. In the process of updating, please don’t leave your
phone far away from the sensor.

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 6
3.4 How to configure it with your phone
3.4.1 Run the APP and click the “Config” button
3.4.2 Input the edit password. The password is “654321” in default.
3.4.3 You will find configure box. We support Name/Password/Broadcast
cycle/Temperature alarm/Humidity alarm/Led/Reset setting by APP.
3.5 How to connect it with TOPFLYtech tracker
3.5.1 Please make sure the device you want to connect with the sensor has Bluetooth
feature.
3.5.2 Please refer to the accordingly latest command list. Hardwired series please refer
to <0x25> command list. OBDⅡ series please refer to <0x26>.
3.5.3 Add the sensor ID into the ID list of the tracker. You can get the ID by scanning

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 7
QR-code of the tag.
3.5.4 Please set the broadcast reporting period by below command.
3.5.5 Please view the sensor data from your platform.
3.6 How to connect it with the third-party Bluetooth device
3.6.1 If you want to forward the sensor data to the third-party Bluetooth device, you
need to contact TOPFLYtech about the compatibility issue.
4. Quick Trouble Shooting
4.1 The APP shows “Loading” all the time
4.1.1 End the program first.
4.1.2 Check the Bluetooth status and make sure the BLE is on.
4.1.3 Make sure all the permissions of the APP are allowed. You can enter <Settings>-
<Permissions> to manage it.
4.1.4 Close to the sensor and run APP again.
5. Warranty and Stock
The device standard warranty period is 12 months starting from the date of purchasing.
6. Basic
Below are parameter setting of sensors by the APP.
Parameter
Description
Password
Default Password Is “654321”. You Can Protect Your Sensor Setting
by Changing Password.
Broadcast Cycle
The Uploading Period Setting of Sensor.
Temperature High Alarm
Once meets this condition, it will trigger alarm.
Temperature Low Alarm
Once meets this condition, it will trigger alarm.
Humidity High Alarm
Once meets this condition, it will trigger alarm.
Temperature Low Alarm
Once meets this condition, it will trigger alarm.
LED
LED Controller Switch.
Reset Factory
It will clean All setting.