Torbal DRX-4C2 User manual

Pill Counting – Quick Reference Guide - DRX-4C2
1. To enter Pill Counting Mode, press the Function key. Select “ CouNT" by pressing the T key.
2. “Press Tare” will appear on the scale’s display, indicating
to tare a counting container.
3. Place an empty vial or counting container on the pan. The
container’s weight will be displayed. Wait for the weight to stabilize and press the T key to tare.
Pill Counting (DRX-4C2 Models)
Count
3
.
498
-------
PRESS
TARE

Pill Counting – Quick Reference Guide - DRX-4C2
4. The scale will display SAPL ON (SAPL ON). Manually count the
required piece sample and place it in the container on the pan.
5. The scale will display the weight of the sample. Press the T key
to confirm the sample weight.
6. The scale will display FILL indicating to
begin filling the remainder of the count.
Begin to pour the pills into the container.
7. Once an accurate piece count has been taken, the container
and its contents may be removed from the scale. After
removing the container, done will appear on the screen.
Note: If more pieces have been placed into the container than actually desired, you may
use tweezers, a pharmacy spoon, or a similar instrument to remove the container from the
pan, dispense out the excess pieces, and place it back on the pan to recheck the count
8. To finish the count and begin a new one, press the Clear key.
DONE
SAPL ON
10
3
.
250
g