Toro Lynx User manual

Golf Irrigation Products
International Markets

2
Irrigation Services 3
NSN
®
(National Support Network) 4
Control Systems and Field Controllers
Lynx™ Central Control System 5
SitePro
®
Central Control System 6
Turf Guard
®
Soil Monitoring System 7
PRISM™ 8
T.Weather
®
8
Hand-held Radio Interface 9
Network Radio Link and FIU with Radio 9
Network VP
®
Satellites 10
Network VP
E Satellites 11
Network LTC
®
Plus Satellites 12
Toro GDC System 13
Sprinklers/Drip
Comparison Chart 15
835S/855S Series Rotors 16
DT35/DT55 and DT34/DT54 Series Rotors 19
B Series Rotors 25
Mainless and Back Nozzle Data 29
Toro
®
Conversion Assemblies 30
R-Series Conversion Assemblies 31
690 Series Rotors 34
DL2000
®
Subsurface Drip 35
Sprinkler Tools 36
Valves
Comparison Chart 37
220G Brass Series 38
P220G Series 39
Quick Couplers 40
Resources
Technical Data 41
Wire Sizing 42
Warranty 43
Table of Contents

3
Irrigation Services
Toro Technical Support
Our technical support team is highly skilled at what they do. From helping
superintendents, program controllers, troubleshooting complex system issues with
customers, the support team provides years of irrigation experience that you can count
on. For exceptional technical support, e-mail [email protected]
Toro Controller Repair
Did you know that with Toro’s Board Exchange Program you can get the replacement
controller boards you need immediately? Through your distributor, Controller
Repair provides controller boards ready for immediate board exchange to assure that
controller downtime is minimal and your golf course and reputation stays protected.
For immediate assistance call: [phone] or e-mail [email protected]
Toro Field Service
With some of the most knowledgeable and helpful field service staff in the industry,
and our extensive training and support programs; Toro field service personnel are
always there to assist—before, during, and well after a sale.
Toro Genuine Parts
From the smallest sprinkler part to complete control systems, Toro Service Parts support
can deliver most replacement parts to our distributors within hours. In fact, Toro offers
its customers the highest parts order completion rate in the industry.
www.toro.com/golf
Log onto www.toro.com/golf for more information about our products and services.

4
NSN® Connect
Features
• Remote access so that you can control Irrigation anytime,
anywhere
• Easy access from your Apple or Windows mobile device
• Ability to easily transfer files
• Ability to print remote documents from a remote location
• Remote access activity logs and other security features
Minimum Requirements for Remote Control Devices
Desktop or Laptop
• Windows 7 or XP
• Internet Explorer 5.0 or higher
Apple Mobile Device
• iPhone, iPod Touch, or iPad
• iOS 3.0 or higher
• NSN Connect app from the iTunes App Store
Windows Mobile Device
• Windows Mobile 5.x, 6.0, or 6.1.x
• Mobile Internet Explorer
• Touch screen
An Unparalleled Range Of Support Service Solutions
At Toro, our top priority is providing you with the best golf
irrigation products and then backing them with superior
service and support. To keep you and your course on track, our
comprehensive service offerings range from installation and
training to system optimization, and everything in between.
We understand your reputation is on the line every day and we
pledge to provide a level of support that ensures your success,
with every Toro product, every day.
NSN® (National Support Network)-
We’re Always Here For You
NSN® Custom Database Management
Features
• Control system repair and refinement provides more
precise watering.
• Site code setup for micro-managed irrigation.
• Nozzle database and hydraulic system repair and
refinement provide greater operational flexibility and
reduced system wear and tear.
• TZF file compression & cleaning and multiple database
creation provide specialized programming to meet specific
site requirements.

5
Lynx™ Central Control System
Features
• Supports 16 languages: Bulgarian, Simplified Chinese,
Czech, Danish, Dutch, English, French, German, Italian,
Japanese, Korean, Norwegian, Portuguese, Russian, Spanish
and Swedish
• Intuitive Area and Hole orientation allows you to control
your irrigation system the same way you think about the
course
• Instant Program has simple check-box selection and
Dynamic Drilldown so you can instantly create and
personalize new irrigation programs*
• Dynamic Drilldown enables area, hole or station views in
Watering Plan and Course Report screens
• Course Report provides both real time and daily summaries
of both scheduled and manual watering events. Take the
guesswork out of knowing how your system performed
• Control your irrigation by setting runtime minutes or
amount (mm or in) and let the system calculate the other.
See exactly how much water you will apply and how long
you will irrigate each area
Features (continued)
• Turf Guard integration helps you determine when to
irrigate and how much
• Create and edit your own interactive digital map
• Fully supports CAD-generated maps Integrated run time
display shows past and planned irrigation activity so you
can easily determine what action to take
• With Quick Start, you create station, hardware and area
associations, and control the definition of greens, tees,
fairways and sprinklers based on their locations
• A basic hydraulic tree is auto-generated for you during
Quick Start
• Projected Flow view shows you areas that will be watered
and how much will be applied
• Pump station monitoring helps ensure sprinkler
performance and prevent wasted water or energy
• Runtime synchronization with Network VP® satellites
prevents irrigation outages if the central goes offline
• Current-sensing capabilities notify you of wire cuts and
sprinklers unintentionally turned off**
• Runtimes are executed to the second rather than rounding
to the whole minute, resulting in more precise irrigation
and water savings**
• Constant communication with Network VP satellites lets
you take action if a power outage threatens irrigation**
• GDC communication and solenoid diagnostics help identify
shorts, low voltage and other issues
• Weather station integration and Hand-held Remote
Interface support are included as standard features
Warranty
• 1, 3 and 5 year renewable NSN support
Specifying Information—Lynx
LX-0X-1-XX
Type Computer Hardware Service Level Field Hardware
LX 0X1X X
LX—Lynx 0—Budget Computer
1—Standard Computer
1—1-year NSN (Standard) 2—SE
3—PE
4—CE
1—OSMAC/E-Series OSMAC
3—Network VPE
7—Network VP
8—Network GDC
Example: When ordering a Lynx PE Central with a standard computer and one year of NSN using Network VPEfield hardware, you would order: LX-01-1-33
* Available only in PE and CE levels
** Network VP and VPEmodels only
Specification Lynx SE Lynx PE Lynx CE
Maximum Satellites 500 500 500
Maximum Sat. Sations 512 1,344 32,000
Maximum GDC Stations 500 1,000 6,400
Map Interface Standard Standard Standard
Hand Held Radio Interface Software Standard Standard Standard
Maximum Weather Stations 10 10 10
Maximum Pump Stations 2 3 6
Turf Guard Soil Sensor Integration Standard Standard Standard
Communication Modes Wireless digital paging, 2-way wired, 2-way wireless, hybrid
Platforms Supported Network VP, Network VPE, GDC, OSMAC
Number of Courses 1 2 3
Quick Start Standard Standard Standard
Operating System Windows 7 Windows 7 Windows 7
NEW

6
SitePro® Central Control System
SitePro 3.0 Network VP Support
• Station base flow management
• Station current sensing
• Download times reduced by up to 80%
• Individual station cancel
Optional Features
• T.Weather® WeatherLogic® software module which allows:
• Calculated ET-driven runtimes
• User-defined alarm thresholds
• Interactive, automatic response to the central
• NWHH hand-held radio software for on-course irrigation
control
• PRISM graphical on-course irrigation control
Warranty
• 1 Year or 5 Year renewable warranty with NSN® support
agreement
Features
• Remote access to your system anytime, anywhere with
NSN® Connect.
• Run your system directly from T.Map® to view, edit and
create irrigation programs. Compatible with GPS, CAD and
aerial photography.
• Multiple communication modes:
• Wireless digital paging
• 2-way wireline
• 2-way wireless
• Hybrid (combination of wireline and wireless) for
Network LTC® Plus and Network VP®
• Available Alarm/Response capabilities:
• Reads sensors from the field
• Logs status of sensors based on multiple "if/then" logic to
generate alarms
• Automated adjustment factors allow scheduling refinement
from 0-999% by station, satellite, program, group and
global
• Selectable program upload information
• Microsoft® Windows XP Professional™ compatible
• User-definable names vs. system defaults
• Toro Repeat & Soak assigned by program or station:
• Up to 3 repeats per program
• Up to 24 starts per program
• Advanced multi-manual operations for overseeding,
hot spots or fertilizer wash-in for all hardware platforms
• Extensive reporting capabilities
• Multi-lingual display (English, Spanish, French, German,
Italian, Japanese and Chinese)
• Pump station integration
• Connect to multiple pump stations
• Maximize system efficiency and save energy
• Three levels to fit your needs
• SitePro SE
• Up to 480 Satellite Stations
• Up to 400 Decoder Stations
• Manage up to 2 Pump Stations
• Program via map
• SitePro PE
• Up to 1,344 Satellite Stations
• Up to 800 Decoder Stations
• Manage up to 3 Pump Stations
• ET Based Runtimes
• T.Weather software
• SitePro CE
• Up to 19,200 Satellite Stations
• Up to 3,200 Decoder Stations
• Unlimited Pump Stations
• Auto Rainfall Adjustment
• Map Watering Preview
• Advanced Multi-manual Operations
Specifying Information—SitePro
SP-0X-X-XX-NB
Type Computer Hardware Service Level Field Hardware Paging
SP 0X X X X NB
SP—SitePro 0—Budget Computer
1—Standard Computer
4—Premium Computer
1—1-year NSN
5—5-years NSN
2—SE
3—PE
4—CE
1—OSMAC/E-Series OSMAC
3—Network LTC Plus
7—Network VP
8—Network GDC
NB—Narrow- band Digital
Wireless Paging
Example: When ordering a SitePro PE Central with a standard computer and one year of NSN using Network LTC Plus field hardware, you would order: SP-01-1-33

7
Turf Guard®
Wireless Soil Monitoring System
Operational Features
• Sensing
• Monitor moisture levels
• Track salt build-up and schedule flushing.
• Monitor daily soil temperatures
• Wireless Network - install sensors in greens, fairways, tees
and other areas without having to trench or pull wires
• Base station connects to internet in the office
• Immediately ready for play after installation
• Even remote canyon courses have complete coverage due
to advanced MESH routing technology
• Repeater mounts in most Toro irrigation satellite pedestals
• External repeater available for other models including non
Toro pedestals
• Supports up to 500 sensors per course
• Expected sensor battery life of 3 years
• Sensor reading sent every 5 minutes
• Measures two distinct depths in the soil profile
• Critical root zone level and a second 125mm (5”) lower
• Automatic network configuration and failure recovery
• Graphical course overview displays sensor data at-a-glance
• Plots trends and compares historical and current readings
• Move quickly from course-wide averages to individual
sensor readings
Sensor
Pedestal
Repeater
Base Station
Electrical Specifications
• Input Power:
• Repeater: <0,02A @ 6 VDC
• Base Station: <0,1A @ 120 VAC, 50/60 Hz
• Sensor dimensions:
• Body: 5,0 X 7,6 x 12,7cm (2" x 3" x 5")
• Spikes: 6,4 x 0,48 cm (2.5" x 3/16")
• Installation Hole Diameter: 10,8 cm (4.25 in.)
• Sensor temperature:
• Operating: 0°C to 60°C (32°F to 140°F)
• Storage: -30°C to 82°C (-22°F to 180°F)
• Sensing:
• 0,1°F Temperature resolution
• 0,1 % Volumetric soil moisture content resolution
• 0,1 dS/m Soil conductivity resolution (Salinity)
• Communication:
• Repeater Range: 1524m (5,000’) line-of-sight
• Buried Sensor Range: 152m (500’) line-of-sight
• Additional licensing not required
Warranty
• 1 Year (NSN plans available)
Specifying Information—Turf Guard
TG-XX-XXX-XX
Model Description Communication
TG XX-XXX XX
TG-Turf Guard S2-R-Sensor, Replaceable Battery
B-Base Station
R-EXT-Repeater, External
R-INT-Repeater, Internal
PS-Power Supply
AU-915.5 to 927.5 MHz Band
EX-900 MHz ISM Band
EU-869 MHz ISM Band
Note: Not available in all locations, please check with your Toro representative for availability.

8
T.Weather® with WeatherLogic®
Specifying Information—
T.Weather w/WeatherLogic
Model No. Description
997-04 T.Weather w/WeatherLogic Software
Close
SitePro Data
Radio
Commands
Percent
Adjust/Hold
Utilities
Cancel Current
Selection
Soft Keyboard
Select
QuickView
Multiple
Sprinkler Select
Accept Current
Selection
PRISM™ Mobile Control
Specifying Information—PRISM Software
Order No. Description
676-17
676-18
676-19
676-26*
676-27*
676-28*
Bundles with iPAQ PDA
PRISM Software, iPAQ Unit, 1 Year NSN Support (1st Unit)
PRISM Software, iPAQ Unit, 1 Year NSN Support (2nd Unit)
PRISM Software, iPAQ Unit, 1 Year NSN Support (Units 3–5)
Software Only* (with NSN) for iPAQ 3800
PRISM Software, 1 Year NSN Support (1st Unit)
PRISM Software, 1 Year NSN Support (2nd Unit)
PRISM Software, 1 Year NSN Support (Units 3–5)
*Only available to customers who have purchased an iPAQ through Toro NSN
Features
• Manually start stations, change station percent
adjustments or put selected sprinklers on hold
• Review and adjust system settings
• PRISM desktop software allows you to download all
changes to update your SitePro system
• View greens, tees, fairways, etc.
• Select holes and sprinklers
• With the QuickView™ feature, use Prism before you have
a map—it converts SitePro® data into a grid view with a
station summary display
• Send radio commands (with repeat functions)
• Save and recall up to 20 user-defined commands
• Modify hold times by utilizing a pop-up calendar
• One-year NSN® toll-free telephone support
• Voice recorder, mobile address book and calendar
capability
• Works exclusively with Toro SitePro®, Network CDS,
Network LTC® Plus, Network DR2™, Network 8000®,
Network VP® and GDC in conjunction with the Hand-
Held remote system, and SitePro for E-OSMAC®
Features
• Works with SitePro to control of on-site or off-site weather
stations:
• Phone
• Radio
• Wireline
• User-defined polling interval
• Color-coded alerts indicate when environmental conditions
are not within the normal range
• Interactive, automatic response to the SitePro central
control system
• Weather station data (temperature, relative humidity, dew
point, wind speed and direction) displays in real time or
24-hour periods:
• 24-hour periods show high, low and average data
• Solar radiation displays daily total
• Data totals for ET, rain and the difference between them
shown for the last hour, 24 hours, 7 days and 365 days
• Stores weather station data for up to one year
• System displays time in 12-hour (a.m./p.m.) or 24-hour
format
• Defines specific conditions for alarms using multiple inputs
• Pause irrigation cycles according to the user-defined alarm
thresholds
• Transmits the changes in alarm conditions to SitePro so
it can resume irrigation again
• Weather tracking allows viewing of current data retrieved
from the weather stations, or creating reports based on the
past hour, day, week or year

9
Features
• Optional for the following Lynx™ central control systems:
• Network VP®
• Network VPE®
• OSMAC
• GDC
• Optional for the following SitePro® Network central control
systems:
• Network VP
• Network 8000®
• Network LTC® Plus
• Network CDS
• Network DR2
• GDC
• Access central and satellite features from the field.
• Clear audio verification of system commands.
• Simple command set
• Extensive start and syringe capabilities
• Comprehensive multi-manual functionality
• System and program pause and resume
• System On and Off command activation
• Built-in programmable radio available
• UL listed
Hand-held Radio Interface
Network Radio-Link and FIU with Radio
Specifying Information—
Network Hand-held Software
Model Number Description
997-05 Network Hand-held Software
Specifying Information—Hand-held Radio Interface
NB-HHRI-0X
Communication Hardware Optional
NB HHRI 0X
NB—Narrow Band HHRI—Hand-held Radio Interface 01—With Radio
02—Less Radio
Example: When specifying a Network Hand-held radio with narrow-band frequency and a 110 V ac transformer, you would specify: NB-HHRI-01
Note: Not available in all locations, please check with your Toro representative for availability.
Specifying Information—Field Interface Unit (FIU)
Model No. Description
FIU-2010
FIU-2011
FIU-2011R
FIU-2020
FIU-2021
FIU-2021R
Field Interface Unit with 1 Wire Line
Field Interface Unit with 1 Wire Line and 1 Radio Line, Radio Not Included
Field Interface Unit with 1 Wire Line and 1 Radio Line, Radio Included
Field Interface Unit with 2 Wire Lines
Field Interface Unit with 2 Wire Lines and 1 Radio Line, Radio Not Included
Field Interface Unit with 2 Wire Lines and 1 Radio Line, Radio Included
Note: FCC license required. R-models not available in all locations, please check with your Toro representative for availability.
Features
•Wireless communication to Network satellites
•Network Radio-Link kits for upgrades
•True 2-way communication
•Multi-portfieldinterfaceallowsoneradiotobeshared
among many satellites
•Easysatelliteinstallation
•CompatiblewithNetworkLTCPlus,NetworkVPEand
Network VP

10
Features
• Station based flow management reduces nighttime water
window and optimizes pump capacity.
• Variable Length (VL) communication reduces download
time by up to 80%.
• Current sensing monitors each station output for proper
amperage draw with user defined thresholds.
• Intuitive user interface with backlit display for better low-
light viewing.
• Optional output switches and surge protection
• Multi-Manual, Program Start and Syringe manual
operations
• Group Multi-Manual operation
• Sturdy plastic or painted stainless steel pedestals
• Operates as a stand-alone controller, or under the
management of a central computer
• Supports wireline or radio communications
• Supports hybrid communication (wireline and radio) for
increased flexibility and cost effectiveness.
• 64 irrigation programs: independent stand-alone and
central operation
• Basic, Advanced and Grow-in programs
• Pause, Resume and Stop functions
• Supports run times from 1 second to 23:59:59
• Percent adjust from 1% to 900% (Station, Program,
Satellite)
Features (continued)
• Each output can be defined as an irrigation station or
general application switch
• Non-volatile memory retains program information and
satellite settings during power-off conditions. Battery back-
up retains the satellite date and time
• 16-64 stations in 8-station increments – 64 programs
• Individual station control and the ability to run up to 32
stations simultaneously
• Backwards compatible with Network 8000 satellites.
Electrical Specifications
Input Power:
• 108 V ac to 132 V ac, 60 Hz
• 0,20 amps (no load) 115 V ac
• 1,20 amps (max load) 115 V ac
• 216 V ac to 264 V ac, 50 Hz
• 0,10 amps (no load) 230 V ac
• 0,60 amps (max load) 230 V ac
Output Power:
• 24 V ac
• 3,0 amps (max total load)
• UL Listed
Additional Specifications
• Operating temperature: -10°C to 60°C (15°F to 140°F)
• Storage temperature: -30°C to 65°C (-22°F to 149°F)
• Humidity: 0% to 95% RH (non-condensing)
Dimensions
• Plastic Cabinet: 41cm W x 99cm H x 41cm D
(17” W x 40” H x 16” D)
• Metal Cabinet: 33cm W x 91cm H x 33cm D
(13” W x 36” H x 13” D)
Warranty
• 1 Year
Specifying Information—Network VP Satellites
201-XXX6XX
Description Configuration Cabinet Output Comm. Options
201 XX X6XX
201—Network
VP Satellite
16—16 Stations 24—24 Stations
32—32 Stations 40—40 Stations
48—48 Stations 56—56 Stations
64—64 Stations
P—Plastic, Green
S—Stainless Steel (Painted)
T—Desert Sand
B—Tree Bark
6—24 VAC Electric A—Stand-alone
M—2-Way Wire Modem
R—UHF Radio
0—No Options
1—Large-capacity Terminal Block w/Standard Surge
2—Large-capacity Terminal Block w/Add’l Surge
3—Large-capacity Terminal Block & Switches
4—Large-capacity Terminal Block w/Add’l Surge & Switches
Example: When ordering a 24-station, Stand-alone VP Satellite in a plastic cabinet with large-capacity terminal block, additional surge and switches,
you would specify: 201-24P6A4
Radio option not available in all locations, please check with your Toro representative for availability.
Network VP® Satellites
Pedestal available in standard
Green, Desert Sand and Tree Bark
Upgrade kits include a new timing
mechanism and power distribution
board and a full installation can
be completed in minutes per
controller. Network LTC Plus
Upgrade Kit consists of Network VP
faceplate, power distribution board,
and interface cable.
Upgrade Kit -
Network LTC® Plus to Network VP
Specifying Information—Network LTC Plus Upgrade Kit
118-0038
Kit Contains
Network VP Faceplate, Network LTC Plus To Network VP Power Distribution Board, Cable And Hardware

11
Features
• Display supports 7 languages: Chinese, English, French,
Italian, Japanese, Korean and Spanish
• Station based flow management reduces nighttime water
window and optimizes pump capacity.
• Variable Length (VL) communication reduces download
time by up to 80%.
• Intuitive user interface with backlit display for better low-
light viewing.
• Optional output switches and surge protection
• Sturdy plastic pedestal
• Supports wireline or radio communications
• Supports hybrid communication (wireline and radio) for
increased flexibility and cost effectiveness.
• 16 irrigation programs
• Pause, Resume and Stop functions
• Supports run times from 1 second to 23:59:59
• Percent adjust from 1% to 900% (Station, Program,
Satellite)
• Each output can be defined as an irrigation station or
general application switch
• Non-volatile memory retains program information and
satellite settings during power-off conditions. Battery back-
up retains the satellite date and time
• 16-64 stations in 8-station increments
• Individual station control and the ability to run up to 16
stations simultaneously
• Backwards compatible with Network 8000 satellites.
Central Control Compatibility
• The Toro® Lynx® Central Control System
Electrical Specifications
Input Power:
• 108 V ac to 132 V ac, 60 Hz
• 0,20 amps (no load) 115 V ac
• 1,20 amps (max load) 115 V ac
• 216 V ac to 264 V ac, 50 Hz
• 0,10 amps (no load) 230 V ac
• 0,60 amps (max load) 230 V ac
Output Power:
• 24 V ac
• 3,0 amps (max total load)
• UL Listed
Additional Specifications
• Operating temperature: -10°C to 60°C (15°F to 140°F)
• Storage temperature: -30°C to 65°C (-22°F to 149°F)
• Humidity: 0% to 95% RH (non-condensing)
Dimensions
• Plastic Cabinet: 41cm W x 99cm H x 41cm D
(17” W x 40” H x 16” D)
• Metal Cabinet: 33cm W x 91cm H x 33cm D
(13” W x 36” H x 13” D)
Warranty
• 1 Year
Network VPE Satellites
Pedestal available in standard
Green, Desert Sand and Tree Bark
NEW
Specifying Information—Network VPESatellites
10X-XXX6XX
Description Configuration Cabinet Output Comm. Options
10XXX X6X X
100—Network VPESatellite
(115/230 VAC Input)
109—Network VPESatellite
(100/200 VAC Input)
16—16 Stations 24—24 Stations
32—32 Stations 40—40 Stations
48—48 Stations 56—56 Stations
64—64 Stations
P—Plastic, Green
T—Desert Sand
B—Tree Bark
6—24 VAC M—2-Way Wire Modem
R—UHF Radio
0—No Options
3—Large-capacity Terminal Block & Switches
4—Large-capacity Terminal Block w/Add’l Surge &
Switches
Example: When ordering a 24-station, 2-way wire VPE Satellite in a plastic cabinet with large-capacity terminal block, additional surge and switches,
you would specify: 100-24P6M4
Radio option not available in all locations, please check with your Toro representative for availability.

12
Specifying Information—Network LTC Plus Satellites
LTCPXXX6XX
Configuration Stations Cabinet Output Communication Options
LTCP XX X6X X
LTCP—Network LTC Plus 16—16 Stations
24—24 Stations
32—32 Stations
40—40 Stations
48—48 Stations
56—56 Stations
64—64 Stations
P—Plastic, Green
S—Stainless Steel
(Painted)
T—Desert Sand
B—Tree Bark)
6—24 VAC
Electric
A—Stand-alone
M—2-Way Wire Modem
R—UHF Radio
0—No Options
1—Large-capacity Terminal Block w/Standard Surge
2—Large-capacity Terminal Block w/Additional Surge
3—Large-capacity Terminal Block & Switches
4—Large-capacity Terminal Block w/Additional Surge & Switches
Example: When specifying a 64-station Network LTC Plus Satellite with a plastic cabinet, electric output with a 2-way wire modem
and optional large-capacity terminal block, you would specify: LTCP64P6M1
Note: FIUs must be ordered separately.
Features
• Exclusive Toro Flowsafe™ protects flow-managed programs
in the event of a central or wireline interruption
• Transition from stand-alone to central control after
construction is complete
• 16 independent programs with up to eight running
simultaneously (The Network LTC with Electric-hydraulic
converters has 8 independent programs with up to 4
running simultaneously)
• Wireless, wireline and hybrid configurations allow you to
customize the communication network to meet site specific
needs.
• 16-64 stations in eight-station increments on the Network
• LTC Plus. The Electric-hydraulic converter models offer 12
to 24 stations in four-station increments
• Standard or large-capacity terminal connections (accepts
two 14-gauge wires)
• Standard or additional surge protection
• Manual On/Off station switches (optional)
• 14-day calendar or 1- to 29- day Interval scheduling by
program
• 0 to 3 repeats per program
• 0- to 59-minute soak time between repeats
• Up to 12 starts per program, per day
• Station run times from 1-minute to 8 hours and 59 minutes
• Global or independent program adjust at the satellite
• Percent adjust by program (10 to 250%)
• Syringe %, allows 10 to 99% operating adjustment.
• Up to 2 non-irrigation (switch) programs available with
central software
• Non-volatile memory saves program data for up to 10 years
without power
• Pump and Common control module with standard surge
protection
• Manual operation by program (normal or syringe),
independent station or multiple stations (up to 6)
• Patented Toro Hot Post for easy valve activation and
identification
• Maximum lightning protection with EHC’s
Central Control Compatibility
• The Toro® SitePro® Central Control System
Electrical Specifications
• Input power (Network LTC Plus):
• 115/230 V ac, 50/60 Hz
• 0,150 amps @ 115 V ac, 60 Hz (no load)
• 0,872 amps @ 115 V ac, 60 Hz (max load)
• 0,140 amps @ 230 V ac, 50 Hz (no load)
• 0,480 amps @ 230 V ac, 50 Hz (max load)
• Input power (Network LTC with Electric-hydraulic
Converters):
• 115/230 V ac, 50/60 Hz
• 0,15 amps @ 115 V ac, 60 Hz (no load)
• 1,09 amps @ 115 V ac, 60 Hz (max load)
• 0,15 amps @ 230 V ac, 50 Hz (no load)
• 0,59 amps @ 230 V ac, 50 Hz (max load)
• Output power:
• 24 V ac
• 3,15 amps (76 VA) total
Dimensions
• LTC Plus Plastic Cabinet:
43cm W x 101cm H x 38cm D (17” W x 40” H x 16” D)
• LTC Plus Stainless Steel (painted):
33cm W x 91cm H x 33cm D (13” W x 35.75” H x 13” D)
• LTC with Electric-hydraulic Converters:
41cm W x 99cm H x 38cm D (16” W x 39”H x 16” D)
Warranty
• 1 Year
Network LTC® Plus Satellites
Pedestal available in
standard Green, Desert
Sand and Tree Bark

13
Toro® GDC System
1, 2 and 4-station Decoders
GDC 200
Specifying Information—Stand-alone Gateway
DEC-SA-200
Type Communication Sta. Count
DEC SA 200
DEC—Decoder SA—Stand-alone 200—200 Stations
Specifying Information—Decoder
DEC-ISP-X
Type Configuration
DEC XX
DEC-ISP—Decoder* 1—1-station
2—2-station
4—4-station
Example: A 2-station GDC Decoder would be specified as: DEC-ISP-2
*Refer to sprinkler pages for specifying information on Sprinkler Decoders
Specifications
• Maximum number of wire paths:
• 16 per gateway
• Maximum stations per gateway:
• 200 on stand-alone
• 1600 on Central Control System
• Maximum stations per system:
• 200 on stand-alone
• 6400 on Central Control System
• Simultaneous stations per output:
• 20 on stand-alone
• 100 on Central Control System
• Maximum distance from central to decoder (using 14
gauge wire): 4,18km (2.6 miles)
• Maximum distance from decoder to sprinkler (using 14
gauge wire): 121,9m (400 ft.)
• Solenoids per output: 2 DCLS-P
• Stations per decoder: 1, 2 or 4
• Operating temperature: 0°C to 60°C (32°F to 140°F)
• Storage temperature: -30°C to 100°C (-22°F to 212°F)
Electrical Specifications
• ISP decoders are rated at 20 KV surge protection—the
highest in the industry.
• Input Power:
• 100-240 V ac, 50/60 Hz
• Gateway output voltage: 42,5 V ac max
• Gateway output power: 98 VA max
• Decoder wiring: 14 gauge or 2.5mm2
Warranty
• 1 Year
Features
• Operate with Lynx or SitePro® Central Control System or
use it as a stand-alone system with the GDC 200
• Station-based flow management
• Central Control System
• Mapping capabilities
• Remote hand-held operation
• Weather station integration
• Pump station integration
• Enhanced diagnostics
• Communication
• Electrical shorts/opens
• Solenoid check
• No holding power required to operate stations
• Decoder identification is a unique 5-character address
• Non-corrosive lockable wall mount cabinet, indoor/outdoor
installation
In addition to our
standard GDC
decoders, Toro®
offers most valve-in-
head sprinkler models
with an integrated
decoder.
Specifying Information—GDC System
XX-0X-X-X8
Type Computer Hardware Service Level Field Hardware
XX 0X X X 8
LX—Lynx
SP—SitePro
0—Budget Computer
1—Standard Computer
4—Premium Computer (Site Pro only)
1—1-year NSN
5—5-years NSN(Site Pro only)
2—SE
3—PE
4—CE
8—Network GDC
Example: A Lynx PE standard computer with 1-year of NSN and GDC System field hardware would be specified as: LX-01-1-38

14
Looped Lateral – reduces overall field wire. Direct connect option with integrated sprinkler-
decoder reduces system splices.
Looped Lateral with Multi-Station Decoder – reduces overall field wire and
communication wire splices. Provides lower system cost.
Herringbone Lateral – minimizes the quantity of communication wire and critical splices.
Allows decoders to be accessed without digging.
System configuration options: One size does not fit all. And one type of control system design is not
the best for all applications. Whether it’s lowering system costs, reducing field wire or splices, or providing
easy access to system components, the GDC system offers a variety of configuration options to best fit
your objectives.
Looped Lateral Piping Style – reduces overall field wire. Direct connect option with
integrated sprinkler-decoder reduces system splices.

15
Sprinkler
Comparison Chart
Model 835S/855S DT35/DT55 DT34/DT54 B Series 690
Page Number 16 20 21 26 37
Radius 13-30m
(42’-100’)
13-28m
(43’-92’)
16-30m
(52’-99’)
13-29m
(42’-95’)
27m-33m
(87’-108’)
Short Radius (mainless) 14-16m
(46’-51’)
10,4-15m
(34’-50’)
Radius Reduction Screw Optional Optional
Back nozzle Capable XXXX
Inlet size 1” and 1.5” NPT,
BSP, ACME
1” and 1.5” NPT,
BSP, ACME
1” and 1.5” NPT,
BSP, ACME
1” NPT,
BSP, ACME 1.5” NPT
Flow Range 27-231 LPM
(7.1-61.1 GPM)
31-232 LPM
(8.2-61.3 GPM)
49-234 LPM
(13.0-61.8 GPM)
27-213 LPM
(7.1-56.3 GPM)
193-311 LPM
(51.0-82.2 GPM)
Recommended Operating
Pressure
4,5/5,5 Bar
(65/80 PSI)
4,5/5,5 Bar
(65/80 PSI)
4,5/5,5 Bar
(65/80 PSI)
3,5/6,9 Bar
(50/100 PSI)
5,5/6,9 bar
(80/100 PSI)
Turf XXXXX
High Wind XXXX
Decoder Systems XXX
Normally Open Hydraulic
System X X X X
Spike Guard™ Solenoid X
Full Circle X X X X 1 and 2 Speed
Part-circle Adjustable X X X
Part-circle Fixed 90˚ and 180˚
Part/Full Circle In One 40˚-330˚ and 360˚ 40˚-330˚ and 360˚ 40˚-330˚ and 360˚
Ratcheting Riser X
Check Valve XXXXX
Effluent Water Option XXXX
Smart-Arc Memory
Below Grade
Trajectory Adjustment 7˚-30˚ 25˚ & 15˚ 25˚ & 15˚ 7˚-30˚ / 25˚ & 15˚
Warranty 2 Years 2 Years 2 Years 2 Years 2 Years

16
835S Conversion Assemblies
Models Description
835S-3134
835S-3537
835S-3134E
835S-3537E
835S w/31–34 Nozzles
(33 Nozzle Installed)
835S w/35–37 Nozzles
(35 Nozzle Installed)
835S w/31–34 Nozzles
(33 Nozzle Installed), Effluent
835S w/35–37 Nozzles
(35 Nozzle Installed), Effluent
855S Conversion Assemblies—(Ribbed Body)
Models Description
855S-5154
855S-5558
855S-59
855S-5154E
855S-5558E
855S-59E
102-5011
855S w/51–54 Nozzles
(53 Nozzle Installed)
855S w/55–58 Nozzles
(55 Nozzle Installed)
(59 Nozzle installed)
855S w/51–54 Nozzles
(53 Nozzle Installed), Effluent
855S w/55–58 Nozzles
(55 Nozzle Installed),
Effluent
(59 Nozzle installed),
Effluent
690 Adapter allows you to upgrade any
690 with 855S conversions
855S Conversion Assemblies—(Ribless Body)
Models Description
855S-5154R
855S-5558R
855S-59R
855S-5154RE
855S-5558RE
855S-59RE
855S w/51–54 Nozzles
(53 Nozzle Installed)
855S w/55–58 Nozzles
(55 Nozzle Installed)
(59 Nozzle Installed)
855S w/51–54 Nozzles
(53 Nozzle Installed), Effluent
855S w/55–58 Nozzles
(55 Nozzle Installed), Effluent
(59 Nozzle installed, Effluent)
835S 855S
835S/855S Series
Features
• Trajectory 24 positions from 7 to 30 degrees in 1 degree
increments.
• Spike-guard solenoid with 20,000 volt lightning rating.
• Arc adjustment - 40 - 330 degrees and true full-circle in
one.
• Ratcheting riser allows adjustment with no disassembly.
Operating Specifications
• Inlet:
• 835S: 25mm (1”) NPT, BSP or ACME
• 855S: 38mm (1.5”) NPT, BSP or ACME
• Radius:
• 835S: 12,8 – 28,0m (42’ – 92’)
• 855S: 15,9 – 30,5m (52’ – 100’)
• Flow Rate:
• 835S: 26,9-171,5 LPM (7.1 – 45.3 GPM)
• 855S: 52,6-231,3 LPM (13.9 - 61.1 GPM)
• Precipitation Rates:
• 835S: Minimum: 9mm/hr (.37”/hr);
Maximum: 13,5mm/hr (.53”/hr)
• 855S: Minimum: 11mm/hr (.43”/hr);
Maximum: 15mm/hr (.60”/hr)
• Pilot Valve: Selectable at 50, 65, 80 and 100 psi
• Recommended Operating Pressure Range:
4,5-6,9 Bar (65-100 psi)
Maximum: 10,3 Bar (150 psi)
Minimum: 2,8 Bar (40 psi)
• Electric Valve-in-Head Solenoid: 24V ac, 50/60 Hz
• Inrush: 50 Hz, 0,17 Amps; 60 Hz, 0.12 Amps
• Holding: 50 Hz, 0,15 Amps; 60 Hz, 0.10 Amps
• Trajectory: 24 positions from 7° - 30° in 1° increments
• Check-O-Matic maintains up to 11,2m (37’) elevation
Nozzle Selection
• 835S has eight nozzle variations (30, 31, 32, 33, 34, 35, 36
and 37)
• 855S has nine nozzle variations (51, 52, 53, 54, 55, 56, 57,
58 and 59)
• Four in-line nozzles, rotating stream pattern
• One back nozzle position
• Stator variations: 835S – 3 and 855S – 3
Dimensions
• Body diameter:
• 835S: 16,5cm (6.5”)
• 855S: 19cm (7.5”)
• Body height:
• 835S: 25cm (10”)
• 855S: 29cm (11.38”)
• Weight:
• 835S: 1,35kg (2.98 lbs.)
• 855S: 1,68kg (3.70 lbs.)
• Pop-up height to nozzle: 8,25cm (3.25”)
Warranty
• Two years
Note: Mainless and Back Nozzle Data Located on Page 29.
Apex Data Located on Page 18.

17
835S Series Performance Chart—(U.S.)
Base
Pressure
Nozzle Set 30
(White)
Nozzle Set 31
(Yellow)
Nozzle Set 32
(Blue)
Nozzle Set 33
(Brown)
Nozzle Set 34
(Orange)
Nozzle Set 35
(Green)
Nozzle Set 36
(Gray)
Nozzle Set 37
(Black)
102-2208 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261
Blue Gray Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray
102-2925 102-2910 102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910
psi Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 42 7.1 52 13.7 61 17.1 64 20.2 69 27.4 ———— ——
65 45 8.7 54 15.5 63 20.5 66 22.9 74 30.0 76 32.4 80 34.0 — —
80 46 9.6 57 17.0 67 22.6 70 25.3 77 33.2 79 35.8 84 37.5 86 40.8
100 48 11.2 59 18.9 72 25.2 74 28.2 80 37.0 84 39.9 88 42.5 92 45.3
Stator 102-6929 Blue 102-1939 Yellow 102-1940 White
Conversions 835S-3134 835S-3537
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 11⁄4" swing joint at flows over 25-GPM (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
855S Series Performance Chart—(U.S.)
Base
Pressure
Nozzle Set 51
(Yellow)
Nozzle Set 52
(Blue)
Nozzle Set 53
(Brown)
Nozzle Set 54
(Orange)
Nozzle Set 55
(Green)
Nozzle Set 56
(Gray)
Nozzle Set 57
(Black)
Nozzle Set 58
(Red)
Nozzle Set 59
(Beige)
102-4587 102-4588 102-4589
102-0728 102-0729 102-0730 102-4261 102-4260 102-4259
Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray Blue Gray Blue Gray
102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910
psi Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 52 13.9 62 17.4 66 20.7 69 28.6 ——————————
65 54 15.7 64 20.8 68 23.4 74 31.2 76 33.8 81 35.7 ——————
80 57 17.2 68 22.9 72 25.8 77 34.4 79 37.2 85 39.4 89 43.6 92 47.5 96 57.0
100 59 19.1 73 25.5 76 28.7 80 38.2 84 41.3 89 43.7 94 48.5 95 51.1 100 61.1
Stator 102-1939 Yellow 102-1940 White
102-1941
Conver. 855S-5154 855S-5558 855S-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 11⁄4" swing joint at flows over 25-GPM (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Specifying Information—835S & 855S
8X5S-XX-XXXXX
Body
Inlet Arc Body Threads Valve Type Nozzle Pressure Regulation* Optional
8X5S X X X X X X X
3—1"
5—11⁄2"
5—Part-circle and
Full-circle
in one
0—NPT
4—ACME
5—BSP
1—Normally
Open Hydraulic
2—Check-O-Matic
6—Electric
835S:
30 31 32 33 34 35 36 37
855S:
51 52 53 54 55 56 57 58 59
6—65 psi
8—80 psi
E—Effluent model
DL—Decoder model
N—Nickel plated model
Example: When specifying an 835S Series Sprinkler with NPT threads, #34 nozzle, an electric valve and pressure regulation at 65 psi you would specify: 835S–06–346
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available. Nickel-plated, corrosion-resistant models are available upon request.
835S Series Performance Chart—(Metric)
Base Pressure
Nozzle Set 30
(White)
Nozzle Set 31
(Yellow)
Nozzle Set 32
(Blue)
Nozzle Set 33
(Brown)
Nozzle Set 34
(Orange)
Nozzle Set 35
(Green)
Nozzle Set 36
(Gray)
Nozzle Set 37
(Black)
102-2208 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261
Blue Gray Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray
102-2925 102-2910 102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910
Bar kPa kg/cm2Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM
3,4 340 3,47 12,8 26,9 15,9 51,9 18,6 64,7 19,5 76,5 21,0 103,7 — — — — — —
4,5 450 4,59 13,7 32,9 16,5 58,7 19,2 77,6 20,1 86,7 22,6 113,6 23,2 122,6 24,4 128,7 — —
5,5 550 5,61 14,0 36,3 17,4 64,3 20,4 85,5 21,4 95,8 23,5 125,7 24,1 135,5 25,6 141,9 26,2 154,4
6,9 690 7,04 14,6 42,4 18,0 71,5 22,0 95,4 22,6 106,7 24,4 140,0 25,6 151,0 26,8 160,9 28,1 171,5
Stator 102-6929 Blue 102-1939 Yellow 102-1940 White
Conversions 835S-3134 835S-3537
■ Not recommended at these pressures, Radius shown in meters, Toro recommends the use of a 11⁄4" (30mm) swing joint at flows over 25-GPM (95-LPM),
Sprinkler radius of throw per ASAE standard S398,1,
855S Series Performance Chart—(Metric)
Base
Pressure
Nozzle Set 51
(Yellow)
Nozzle Set 52
(Blue)
Nozzle Set 53
(Brown)
Nozzle Set 54
(Orange)
Nozzle Set 55
(Green)
Nozzle Set 56
(Gray)
Nozzle Set 57
(Black)
Nozzle Set 58
(Red)
Nozzle Set 59
(Beige)
102-4587 102-4588 102-4589
102-0728 102-0729 102-0730 102-4261 102-4260 102-4259
Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray Blue Gray Blue Gray
102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910
Bar kPa kg/cm2Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM Radius LPM
3,4 340 3,47 15,9 52,6 18,9 65,9 20,1 78,3 21,0 108,3 ——————————
4,5 450 4,59 16,5 59,4 19,5 78,3 20,7 88,6 22,6 113,1 23,2 127,9 24,7 135,1 ——————
5,5 550 5,61 17,4 65,1 20,7 86,7 22,0 97,7 23,5 130,2 24,1 140,8 25,9 149,1 27,1 165,0 28,1 179,8 29,3 215,7
6,9 690 7,04 18,0 72,3 22,3 96,5 23,2 108,6 24,4 144,6 25,6 156,3 27,1 165,4 28,7 183,6 29,0 194,9 30,5 231,3
Stator 102-1939 Yellow 102-1940 White 102-1941
Conversions 855S-5154 855S-5558 855S-59
■Not recommended at these pressures, Radius shown in meters, Toro recommends the use of a 11⁄4" (30mm) swing joint at flows over 25‑GPM (95‑LPM), Sprinkler radius of throw per ASAE standard S398,1,

18
A
C
B
Nozzle/Bar/LPM #33/53 Nozzle @ 4,5 Bar #34/54 Nozzle @ 4,5 Bar
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius
16,5 17,1 18,0 18,9 20,1 20,7 18,6 17,7 18,3 19,2 20,4 22,6 21,3
"B" Spray Height 1,2 1,5 1,5 1,8 2,1 2,7 4,0 4,6 1,2 1,5 1,2 1,8 1,8 2,4 3,4 3,0 4,3 5,2
"C" Distance from Head 7,0 9,1 8,5 10,1 9,8 10,4 10,7 10,7 11,3 10,7 11,3 7,3 9,4 7,9 10,4 10,7 12,2 11,9 12,5 11,9 11,9 12,8
Nozzle/Bar/LPM #37/57 Nozzle @ 5,5 Bar #58 Nozzle @ 5,5 Bar
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius
19,8 21,9 21,0 22,6 23,8 23,5 25,0 25,3 26,2 27,1 25,6 25,9 22,9 23,5 25,3 26,5 28,0 26,8
"B" Spray Height 1,5 2,1 2,7 4,3 5,5 6,7 1,8 2,1 3,0 4,6 5,5 6,7
"C" Distance from Head 9,1 11,9 12,5 14,0 15,2 14,0 11,6 12,2 13,1 14,3 15,8 14,6
835S/855S Trajectory Performance—(Metric)
Nozzle/Bar/LPM #31/51 Nozzle @ 4,5 Bar #32/52 Nozzle @ 4,5 Bar
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius
14,0 14,0 15,2 15,5 16,2 16,5 15,2 14,0 14,9 14,9 15,2 15,5 16,8 19,2 19,5 16,5 19,8
"B" Spray Height 1,2 1,2 1,5 1,8 2,4 3,0 3,4 4,0 4,0 4,6 0,9 1,2 1,2 1,8 2,7 3,7 3,4 4,6 4,0
"C" Distance from Head 7,6 7,9 7,6 8,2 7,9 9,8 10,1 11,6 10,1 12,2 10,1 12,4 6,1 6,7 7,3 7,9 8,5 9,4 10,4 10,7 10,4 10,4 9,1
Nozzle/Bar/LPM #59 Nozzle @ 5,5 Bar
Trajectory 7° 10° 15° 20° 25° 30°
"A" Radius
23,5 23,8 25,6 27,1 29,3 28,0
"B" Spray Height 2,1 2,4 3,4 4,9 6,4 7,6
"C" Distance from Head 12,8 13,4 13,7 14,3 16,2 14,9
Information is for reference only, Actual results may vary,
Nozzle/Bar/LPM #35/55 Nozzle @ 4,5 Bar #36/56 Nozzle @ 5,5 Bar
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius
18,0 18,6 18,9 19,5 20,1 21,3 23,2 22,6 23,5 19,5 21,9 20,7 22,2 23,2 22,9 24,4 25,0 25,6 25,9 25,0
"B" Spray Height 1,2 1,8 1,5 1,8 2,1 2,7 3,4 4,6 5,2 1,5 2,1 2,7 4,3 5,2 6,7
"C" Distance from Head 9,1 10,4 9,8 11,0 11,0 13,1 13,1 13,7 13,1 13,7 13,1 13,7 7,6 11,6 12,2 13,7 14,9 13,7
Nozzle/PSI/GPM #33/53 Nozzle @ 65 psi #34/54 Nozzle @ 65 psi
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius 54' 56' 59' 62' 66'/68' 61' 58' 60' 63' 67' 74' 70'
"B" Spray Height 4'/5' 5'/6' 7' 9' 13' 15' 4'/5' 4'/6' 6'/8' 11'/10' 14' 17'
"C" Distance from Head 23'/30' 28'/33' 32' 34'/35' 35'/37' 35'/37' 24'/31' 26'/34' 35'/40' 39'/41' 39' 39'/42'
Nozzle/PSI/GPM #59 Nozzle @ 80 psi
Trajectory 7° 10° 15° 20° 25° 30°
"A" Radius 77' 78' 84' 89' 96' 92'
"B" Spray Height 7' 8' 11' 16' 21' 25'
"C" Distance from Head 42' 44' 45' 47' 53' 49'
Information is for reference only. Actual results may vary.
835S/855S Trajectory Performance—(U.S.)
Nozzle/PSI/GPM #31/51 Nozzle @ 65 psi #32/52 Nozzle @ 65 psi
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius 46' 46' 50'/51' 53' 54' 50' 46'/49' 49'/50' 51' 55' 63'/64' 54'/65'
"B" Spray Height 4' 4' 5'/6' 8'/10' 11'/13' 13'/15' 3'/4' 4' 6' 9' 12'/11' 15'/13'
"C" Distance from Head 25'/26' 25'/27' 26'/32' 33'/38' 33'/40' 33'/41' 20'/22' 24'/26' 28'/31' 34'/35' 34' 34'/30'
Nozzle/PSI/GPM #35/55 Nozzle @ 65 psi #36/56 Nozzle @ 80 psi
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius 59' 61'/62' 64'/66' 70' 76' 74'/77' 64'/72' 68'/73' 76'/75' 80'/82' 84'/85' 82'
"B" Spray Height 4'/6' 5'/6' 7'/9' 11' 15' 17' 5' 7' 9' 14' 17' 22'
"C" Distance from Head 30'/34' 32'/36' 36'/43' 43'/45' 43'/45' 43'/45' 25' 38' 40' 45' 49' 45'
Nozzle/PSI/GPM #37/57 Nozzle @ 80 psi #58 Nozzle @ 80 psi
Trajectory 7° 10° 15° 20° 25° 30° 7° 10° 15° 20° 25° 30°
"A" Radius 65'/72' 69'/74' 78'/77' 82'/83' 86'/89' 84'/85' 75' 77' 83' 87' 92' 88'
"B" Spray Height 5' 7' 9' 14' 18' 22' 6' 7' 10' 15' 18' 22'
"C" Distance from Head 30' 39' 41' 46' 50' 46' 38' 40' 43' 47' 52' 48'

19
Features
• Dual trajectory adjustment of the main nozzle—25° or 15°
• Part and full circle in one – 40° – 330° and true uni-
directional full circle
• Stainless steel valve seat is molded to the body and has
virtually eliminated body replacements due to seat damage
Operating Specifications
• Inlet:
• DT35: 25mm (1”) NPT, BSP or ACME
• DT55: 38mm (1.5”) NPT, BSP or ACME
• Radius:
• DT35: 13,1 – 25,3m (43’ – 83’)
• DT55: 16,7 – 28,0m (55’ – 92’)
• Flow Rate:
• DT35: 31,0 – 179,0 LPM (8.2 – 47.8 GPM)
• DT55: 53,0 – 232,0 LPM (14.1 – 61.3 GPM)
• Precipitation Rates:
• DT35: Minimum: 10,4 mm/hr (.41”/hr);
Maximum: 11,4 mm/hr (.45”/hr)
• DT55: Minimum: 11,7 mm/hr (.46”/hr);
Maximum: 14,7 mm/hr (.58”/hr)
• Pilot Valve: Selectable at 3,5; 4,5; 5,5; and 6,9 Bar
(50, 65, 80 and 100 psi)
• Recommended Operating Pressure Range:
• 4,5-6,9 Bar (65-100 psi)
• Maximum: 10,3 Bar (150 psi)
• Minimum: 2,8 Bar (40 psi)
• Electric Valve-in-Head Solenoid: 24V ac, 50/60 Hz
• Inrush: 50 Hz, 0.33 Amps; 60 Hz, 0.30 Amps
• Holding: 50 Hz, 0.28 Amps; 60 Hz, 0.20 Amps
• Trajectory: 25° or 15°
• Check-O-Matic maintains up to 11,2m (37’) elevation
Nozzle Selection
• DT35 has eight nozzle variations (30, 31, 32, 33, 34, 35,
36 and 37)
• DT55 has nine nozzle variations (51, 52, 53, 54, 55, 56, 57,
58 and 59)
• Three in-line nozzles, rotating stream pattern
• Two back nozzle positions
• Stator variations: DT35-3; DT55-3
• Optional radius reduction screw 363-4839 for fine tuning
Dimensions
• Body diameter:
• DT35: 16,5cm (6.5”)
• DT55: 19cm (7.5”)
• Body height:
• DT35: 25cm (10”)
• DT55: 29cm (11.38”)
• Weight:
• DT35: 1,35kg (2.98 lbs.)
• DT55: 1,68kg (3.70 lbs.)
• Pop-up height to nozzle: 8,25cm (3.25”)
Warranty
• Two years
DT35/DT55 Series
DT35
DT55
DT35 Conversion Assemblies
Models Description
DT35-3134
DT35-3537
DT35-3134E
DT35-3537E
DT35 w/31–34 Nozzles
(33 Nozzle Installed)
DT35 w/35–37 Nozzles
(35 Nozzle Installed)
DT35 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
DT35 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
DT55 Conversion Assemblies—(Ribbed Body)
Models Description
DT55-5154
DT55-5558
DT55-59
DT55-5154E
DT55-5558E
DT55-59E
102-5011
DT55 w/51–54 Nozzles
(53 Nozzle Installed)
DT55 w/55–58 Nozzles
(55 Nozzle Installed)
DT55 w/59 Nozzle
DT55 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
DT55 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
DT55 w/59 Nozzle, Effluent
690 Adapter allows you
to upgrade any 690 with
DT55 conversions
DT55 Conversion Assemblies (Ribless Body)
Models Description
DT55-5154R
DT55-5558R
DT55-59R
DT55-5154RE
DT55-5558RE
DT55-59RE
DT55 w/51–54 Nozzles
(53 Nozzle Installed)
DT55 w/55–58 Nozzles
(55 Nozzle Installed)
DT55 w/9 Nozzle
DT55 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
DT55 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
DT55 w/59 Nozzle, Effluent
Specifying Information—DT35 & DT55
DTX5-XX-XXX-XX
Body
Inlet Arc Body Threads Valve Type Nozzle Pressure Regulation* Optional
DTX5X X X X X X X
3—1"
5—11⁄2"
5—Part-circle and
Full-circle In One
0—NPT
4—ACME
5—BSP
1—Normally Open
Hydraulic
2—Check- O-Matic
6—Electric
DT35
30 31 32 33 34 35 36 37
DT55
51 52 53 54 55 56 57 58 59
6—65 psi (4,5 Bar)
8—80 psi (5,5 Bar)
E—Effluent Model
DL—Decoder Model
N—Nickel-plated Model
Example: When specifying a DT35 Series Sprinkler with NPT threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar),
you would specify: DT35–06–346
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.

20
Specifying Information—DT34 & DT54
DTX4-XXXXX
Body
Inlet Arc Body Threads Valve Type Nozzle Pressure Regulation* Optional
DTX4X X X X X X X
3—1"
5—11⁄2"
4—Full Circle 0—NPT
4—ACME
5—BSP
1—Normally Open Hydraulic
2—Check-O-Matic
6—Electric
DT34
31 32 33 34 35 36 37
DT54
51 52 53 54 55 56 57 58 59
6—65 psi (4,5 Bar)
8—80 psi (5,5 Bar)
E—Effluent Model
DL—Decoder Model
N—Nickel- plated Model
Example: When specifying a DT34 Series Sprinkler with NPT threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar),
you would specify: DT34–06–346
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
DT34/DT54 Series
DT34 DT54
Features
• Dual trajectory adjustment of the main nozzle—25° or 15°
• Constant velocity full circle drive
• Stainless steel valve seat is molded to the body and has
virtually eliminated body replacements due to seat damage
Operating Specifications
• Inlet:
• DT34: 25mm (1”) NPT, BSP or ACME
• DT54: 38mm (1.5”) NPT, BSP or ACME
• Radius:
• DT34: 15,9 – 27,8m (52’ – 91’)
• DT54: 15,9 – 30,2m (52’ – 99’)
• Flow Rate:
• DT34: 49,2-177,5 LPM (13.0 – 46.9 GPM)
• DT54: 50,0-233,9 LPM (13.2 - 61.8 GPM)
• Precipitation Rates:
• DT34: Minimum: 8,4 mm/hr (.33”/hr);
Maximum: 13,9 mm/hr (.55”/hr)
• DT54: Minimum: 8,4 mm/hr (.33”/hr);
Maximum: 15,5 mm/hr (.61”/hr)
• Pilot Valve: Selectable at 3,5; 4,5; 5,5; and 6,9 Bar (50, 65,
80 and 100 psi)
• Recommended Operating Pressure Range:
• 4,5-6,9 Bar (65-100 psi)
• Maximum: 10,3 Bar (150 psi)
• Minimum: 2,8 Bar (40 psi)
• Electric Valve-in-Head Solenoid: 24V ac, 50/60 Hz
• Inrush: 50 Hz, 0,33 Amps; 60 Hz, 0.30 Amps
• Holding: 50 Hz, 0,28 Amps; 60 Hz, 0.20 Amps
• Trajectory: 25° or 15°
• Check-O-Matic maintains up to 11,2m (37’) elevation
Nozzle Selection
• DT34 has seven nozzle variations (31, 32, 33, 34, 35, 36
and 37)
• DT54 has nine nozzle variations (51, 52, 53, 54, 55, 56, 57,
58 and 59)
• Three opposing nozzles, rotating stream pattern
• Two additional front nozzle positions provide maximum
flexibility
• Stator variations: DT34–2 and DT54–3
• Optional radius reduction screw 363-4839 for fine tuning
the radius
Dimensions
• Body diameter:
• DT34: 16,5cm (6 .5”)
• DT54: 19cm (7.5”)
• Body height:
• DT34: 25cm (10”)
• DT54: 29cm (11.38”)
• Weight:
• DT34: 1,35kg (2.98 lbs.)
• DT54: 1,68kg (3.70 lbs.)
• Pop-up height to nozzle: 8,25cm (3.25”)
Warranty
• Two years
DT34 Conversion Assemblies
Models Description
DT34-3134
DT34-3537
DT34-3134E
DT34-3537E
DT34 w/31–34 Nozzles
(33 Nozzle Installed)
DT34 w/35–37 Nozzles
(35 Nozzle Installed)
DT34 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
DT34 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
DT54 Conversion Assemblies
Models Description
DT54-5154
DT54-5558
DT54-59
DT54-5154E
DT54-5558E
DT54-59E
102-5011
DT54 w/51–54 Nozzles
(53 Nozzle Installed)
DT54 w/55–58 Nozzles
(55 Nozzle Installed)
DT54 w/59 Nozzle
DT54 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
DT54 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
DT55 w/59 Nozzle, Effluent
690 Adapter allows you
to upgrade any 690 with
DT54 conversions