ToSee SENTINEL User manual
DETECT PROTECTCONNECT
User Guide
www.www.toseesecurity.com.au www.www.toseesecurity.com.au www.www.toseesecurity.com.au
Application Download Please Note
Search “Smart Life” in your mobile app store, (Google
Play for Android or App Store for IOS)
Remove all (3) green battery terminal protectors from
the base of each battery.
Fully charge SENTINEL doorbell prior to installing -
use USB charging port located at the top of the
doorbell. Slide back plate to expose port and SD card.
Follow the app instructions to set up device or refer
to enclosed Smart Life App User Manual included
within your doorbell packaging.
Device Requirements
iOS 8.0 or higherAndroid 4.1 or higher
2C-20B
WHAT’S INCLUDED
1 x Wi Security Video Doorbell
1 x Door Chime
1 x USB Charging Cord
1 x 16gb Micro SD Card (Built In)
3 x Rechargeable Batteries
1 x Adapter Mounting Plate
Device and APP user manuals
Mounting Fixings for Installation
1 x Installation Tool
USB Charging Port
TF Card
Reset Button
AC Input
Battery
Compartment
Fixed Hole
www.www.toseesecurity.com.au www.www.toseesecurity.com.au www.www.toseesecurity.com.au
Installation Pairing of Chime Pairing of Chime
Place mounting plate in position and mark xing
holes with a marker, drill holes using a 6mm masonry
drill bit and insert wall plugs.
Place mounting plate in place using xings enclosed
to attach to wall. Insert doorbell onto mounting plate
and slide down to x in place.
Plug the chime into a conventional power socket.
Pairing - Press the WiFi Chime volume button for 5
seconds, the LED light will ash, then press the
button of wi- SENTINEL doorbell within 5 seconds.
When the chime LED ashes, the pairing will be
completed.
Press the up or down key to cycle through the range of
available melodies. There are 52 to choose from.
Once you nd a melody that you like, hold the volume
button for 5 seconds till the music indicator light turns
on. It is now in the learning state.
When this is done press the button of the SENTINEL wi
doorbell. When the chime ashes the new melody is set
and set up is completed.
Use the enclosed security screw and installation tool to lock
in doorbell to prevent theft.
Notice
1 32 Overview of the Wireless Chime
Choosing Melody
Speaker
Speaker
Forward Button
Back Button
Volume ControlAC Plug
LED
Step 1
Remove the back bracket
Step 2
Use 4 mounting screws to x the back bracket
onto your door or wall. You can also use
double-sided tape to x the back bracket
Step 3
Fit the doorbell into the back bracket. Use the
provided security screw to secure the doorbell
so the doorbell cannot be removed easily.
