SOMFY Soliris io User manual

1
Soliris io
DEFU Detailed Functionalities
DEFU_DOC158584_000 SOLIRIS io.ppt

Révision
Indice
Description Date Modified by
000
Creation
20/11/2019
S.NICOLAFRANCESCO

SUMMARY
1. PRODUCT PRESENTATION
2. SYSTEM INTEGRATION
2.1 Mode 1
2.2 Mode 2
2.3 Mode 3
3. INSTALLATION
3.1 Installation situation
3.2 Wiring
3.3 Pairing 1W & 2W
4. BEHAVIOUR
4.1Wind & sun in mode 1
4.2 Rain in security and comfort mode
4.3 Wind, sun & rain combined
5. APPENDIX
3

PRODUCT PRESENTATION
1. PRODUCT PRESENTATION
4

SOLIRIS io
✓Designed from 28 to 88km/h
✓Local setting in 1W mode
✓Compatible with rain sensor for security or
comfort benefits (wired Ondeis)
✓Always 230V Powered, no battery matter
✓Io protocol 1W &2W
Lpm 250ms compatibility postponed

Soliris io
Application perimeter
6
Awnings Pergola
EVB
Awnings Pergola
Wind &
Sun
Rain
Swinging
shutter
Screen &
Zip screen
EVB
Screen &
Zip screen
Awnings Pergola EVB
Screen &
Zip screen Roller
Shutters
Not compatible with Autonomous actuators
Not compatible in mode 2 for 2020
TaHoma will be implemented in 2020
Security &
Comfort
Comfort
Roller Shutters
(Sun only)

PRODUCT PRESENTATION
2. SYSTEM INTEGRATION
7

Soliris io
3 modes in io ecosystem depending of your installation and receivers paired
⚫Mode 1:
▪actuators are paired directely at the soliris io sensor
▪Only 1W remote control is used & paired
▪Wind and sun settings should be done localy
▪Sensor behaviour is directed by SOMFY recommendations (see appendix)
⚫Mode 2 (available in 2021):
▪Intelligents motors are paired at the soliris io sensor (as pergola box unit)
▪Only one way remote control is used & paired
▪The intelligents motors used the raw datas from the sensor to react: the behaviour is directed by
intelligents motors
⚫Mode 3 (available in 2021):
▪2 way remote control like TaHoma is used & paired
▪Sensor behaviour, only sun and rain in comfort is directed by scenarios in TaHoma by end user
▪Wind behaviour is directed by SOMFY directly to actuators paired.
8

Offer
Soliris io
Typical installation using sun, wind & rain in 1W
Wind 1W order
=> go to secured
position
Soliris io
Rain sensor (opt)
Rain: 1W order:
Soliris set on Security => go to secured position.
Soliris set on Comfort => go to down end limit (DEL)
230V
2.1 SYSTEM INTEGRATION mode 1
Sun: 1W order:
Sun Appearance: Goto DEL or my
Sun disappearance: GoTo UEL
EVB
Awnings Pergola Swinging
shutter
Screen &
Zip screen Roller Shutters
(Sun only)
Wind &
Sun
Rain
Security
& Comfort

Offer
Soliris io
Typical installation using sun, wind & rain in 1W with intelligence in receiver
Wind 1W order
=> Wind level
Soliris io
Rain sensor (opt)
Rain: 1W order:
Send rain or no rain
230V
2.2 SYSTEM INTEGRATION mode 2
Sun: 1W order:
Sun threshold in Lux
Pergola box for
bioclimatic
Wind &
Sun
Rain
Security
& Comfort
Intelligent Actuators as

Offer
Soliris io
Typical installation using sun, wind & rain in 2W with TaHoma
Wind 1W order
=> => go to secured
Position & possibility
for the future to send
in 2W wind level
Soliris io
Rain sensor (opt)
Rain: 2W order:
Only in comfort mode: Send rain or no rain
230V
2.3 SYSTEM INTEGRATION mode 3
Sun: 2W order:
Sun value in Lux
Rain
Security
& Comfort
EVB
Awnings Pergola Swinging
shutter
Screen &
Zip screen Roller Shutters
(Sun only)
2W => play SUN/No sun &Rain/no Rain scenarios

PRODUCT PRESENTATION
3. INSTALLATION
12

Soliris/Eolis io
3.1 Installation situations
Cover assembling
1 direction only
(not possible to
reverse the cover
position on the
sensor)

Soliris/Eolis io
14
3.2 Wiring (as Eolis io)
Plug for power supply
(230V) Plug for Ondeis sensor (dry contact)
C
S
Selector
to choose Security or
Comfort mode (rain Ondeis)
3 Positions:
C=comfort
S=secutity
Neutral=no rain sensor
RainSensor

Soliris io
Soliris io Ondeis
3.3 pairing with 1W ecosytem
Usual « Prog prog »
procedure
Soliris io and Ondeis paired to actuator

Soliris io
Soliris io Ondeis Pair Soliris+Ondeis by
Tahoma discovering
process
•Soliris must be set on Comfort
•1W pairing for rain (security) & Sun
will be cancelled
1. Soliris wind io paired to actuator
2. Soliris sun & Ondeis paired to Tahoma
Wind
1W
3.3 pairing with 2W ecosytem

PRODUCT PRESENTATION
4. BEHAVIOUR
17

Not recommended
Roller Shutter External Screen Awning
Roller Shutter with
tilting slates Ext Venitian Blind
Go to secured position (ex: pergola bio = Slates open)=>commandACTIVATE_FUNC_D80A
With Fast speed (if implemented by actuator)
+ blocking manual order 30s
+ blocking automatism order 11min 30s (after blocking manual order 30s)
No Action
No
wind
Pergola bio
Pergola Swinging Shutter
4.1 Wind in mode 1

Roller Shutter External Screen Awning
Roller Shutter with
tilting slates Internal Screen Ext Venitian Blind
Sun
Appearance
Sun
Desappearance
Mode 1
The sensor will send 1 frame containing:
= EVB go to « MY » & RS go to « MY » & All go to « Down End Limit » (pergola = Slates Closed) & All with « Low speed » (for actuators who manage low speed)
= EVB go to « Flat slates » & All go to Up End Limit (pergola = Slates open) & All with « Low speed » (for actuators who manage low speed)
My
UP END LIMIT Flat
Slates
My DOWN END LIMIT
Moves to the sun protection position after 5 min.
It is then possible to control the motorised product in manual mode.
Moves to the safety position automatically after a waiting time of 20 to 35 min* (except for a roller
shutter at its lower end limit: it remains in this position).
It is then possible to control the motorised product in manual mode.
4.1 Sun in mode 1

4.2 Rain in security mode
Not recommended
Roller Shutter External Screen Awning
Roller Shutter with
tilting slates Ext Venitian Blind
Pergola bio
Pergola Swinging Shutter Window Opener
Go to secured position (pergola bio = Slates open)
With Fast speed (if implemented by actuator) IVB = orientation
Moves to the safety position automatically and remains blocked as long as the
sensor detects rain.
No Action
No
rain