Toshiba RB-N105S-G User manual

- EN -
INSTALLATION MANUAL
Wireless adapter Accessory part.
No. Part Name RB-N105S-G RB-N106S-G
1Wireless adapter TYPEB 11
2Connection cable -1
3SCREW : M4X25 *2 *2
4SCREW : M4X12 *1 *1
*The number of parts may differ by model.
TYPE B
SETUP button
Initial connection
to Wi-Fi router
WIRELESS LED
Show during A/C add
step and sending
signal to A/C
LINK LED
Show during
connecting process
POWER LED
Show for
Power On
RESET button
For system reset
TYPE B
“The Wireless adapter must be installed, maintained, repaired and removed by a qualified
installer or qualified service person.”
1120490206
Installation position (Inside AC unit)
High - Wall type A High - Wall type B
Installation position (Outside AC unit)
Console chassis High - Wall type C
TYPEB
TYPEB
Caution : Turn off power supply before installation
1. Open air inlet grille and cover for controller.
2. Open Wireless adapter for connect terminal.
2. Open Wireless adapter for connect terminal.
3. Open cover place the controller and connect communication cable from AC and
close cover.
3. Place Wireless adapter to fixing position and connect communication cable from
AC and close cover.
1. Open air inlet grille and terminal cover.
Cover for controller
Cover of adapter no need
fix screw
Fix by screw
Wire out position
TYPE B
Connect terminal
Cover of adapter
no need fix screw
Communication cable
Communication
cable
Fix by screw
Wire out position
Connect terminal
High - Wall type B (Inside AC unit)
How to install Wireless adapter.
High - Wall type A (Inside AC unit)
Remove screw
remove cover
Remove screw
remove cover
TYPE B
Front panel
Cord clamp
Screws
Terminal cover
Air inlet grille Screw

- EN -
TYPE B
Installation note
1. Do not install in a location where high
humidity, high temperature and location
that directly to sunlight and outside air.
2. Do not install nearly device that can
produce electrical noise such as elevators,
automatic door and industrial sawing
machines.
3.
Do not modify for any electrical part, it can
cause for malfunction, electric shock or fire.
4. Install area should be covered by Wi-Fi
signal from Router.
5. Wireless adapter compatible with router
2.4GHz band.
Communication cable from A/C
Cutting position for install
connecting cable
Console chassis (Outside AC unit)
1. Remove the air inlet grille. Open the air inlet grille and remove the strap.
2. Remove the front panel (Remove 4 screws).
Front panel
Air inlet grille
Hook
3. Open Wireless adapter for install on the wall and connect with Connection cable
(accessory part)
Screw fix on wall
TYPE B
TYPE B
4. Insert lead wire in to unit and connect Wi-Fi terminal.
Connection cable
Remove screw
remove cover
High - Wall type C (Outside AC unit)
1. Open air inlet grille and terminal cover.
Cover of Wireless adapter
need to fix by screw
Connection cable from
Wireless adapter
2. Open Wireless adapter for install on the wall and connect with Connection cable
(accessory part)
3. Insert lead wire in to unit and connect Communication cable.
Screw fix on wall
TYPE B
TYPE B
Front panel
Cord clamp
Screws
Screw
Terminal cover
Air inlet grille
Communication cable from A/C
TYPE B
Connection cable
Remove screw
remove cover
Connection cable from
Wireless adapter
Cover of Wireless adapter
need to fix by screw