Toshiba 1600EP Series User manual

UNINTERRUPTIBLE POWER SYSTEM (UPS)
SINGLE PHASE - 3.6-RoHS/3.6/6/8/10/14/18/22
March 2008
Part # 55288-002
Manufactured in the USA
© Copyright 2008 TOSHIBA International Corporation
All rights reserved.
1600EP SERIES
INSTRUCTION MANUAL

1600EP Series Instruction Manual
Product Use and Warranty Restrictions
The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, ofce equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment
that requires extraordinarily high quality and/or reliability or where a malfunction or failure may cause
loss of human life or bodily injury (Unintended Usage). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, trafc signal instruments,
combustion control instruments, surgical operating room or life-support equipment, all types of safety
devices, etc.. Unintended Usage of Toshiba products listed in this document shall be made at the
customer’s own risk.
NOTICE
PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED
REPRESENTATIVE IN CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
The instructions contained in this manual are not intended to cover all of the details or variations in
equipment, or to provide for every possible contingency concerning installation, operation, or maintenance.
Should further information be required or if problems arise which are not covered sufciently, contact your
Toshiba sales ofce.
The contents of this instruction manual shall not become a part of or modify any prior or existing
agreement, commitment, or relationship. The sales contract contains the entire obligation of Toshiba
International Corporation UPS Division. The warranty contained in the contract between the parties is the
sole warranty of Toshiba International Corporation UPS Division and any statements contained herein DO
NOT create new warranties or modify the existing warranty.
Any electrical or mechanical modications to this equipment without prior written consent of Toshiba
International Corporation will void all warranties and may void the UL/CUL listing. Unauthorized
modications can also result in personal injury, loss of life, or destruction of the equipment.
QUALIFIED PERSONNEL ONLY
Qualied Personnel are those that have the skills and knowledge relating to the construction,
installation, operation, and maintenance of the electrical equipment and has received safety
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety
requirements).

1600EP Series Instruction Manual
UNINTERRUPTIBLE POWER SYSTEM (UPS)
Please complete the following information and retain for your records.
Unless otherwise specied, the warranty period for the UPS or UPS part is 36 months from the shipment
date (see Toshiba International Corporation bill of lading).
Unless otherwise specied, the warranty period for a UPS battery is 24 months from the shipment date
(see Toshiba International Corporation bill of lading).
JOB NUMBER
MODEL NUMBER
SERIAL NUMBER
APPLICATION
SHIPMENT DATE
INSTALLATION DATE
INSPECTED BY

1600EP Series Instruction Manual
Purpose
This manual provides information on how to safely install your Toshiba International Corporation power
electronics product. This manual includes a section of general safety instructions that describes the
warning labels and symbols that are used throughout the manual. Read the manual completely before
installing, operating, or performing maintenance on this equipment.
This manual and the accompanying drawings should be considered a permanent part of the equipment
and should be readily available for reference and review. Dimensions shown in the manual are in metric
and/or the English customary equivalent.
Toshiba International Corporation reserves the right, without prior notice, to update information, make
product changes, or discontinue any product or service identied in this publication.
Toshiba is a registered trademark of the Toshiba Corporation. All other product or trade references
appearing in this manual are registered trademarks of their respective owners.
Toshiba International Corporation shall not be liable for direct, indirect, special, or consequential damages
resulting from the use of the information contained within this manual.
This manual is copyrighted. No part of this manual may be photocopied or reproduced in any form without
the prior written consent of Toshiba International Corporation.
© Copyright 2008 Toshiba International Corporation
All rights reserved.
Printed in the U.S.A.
Toshiba Customer Support Center
Contact the Toshiba Customer Support Center for assistance with application information or for any
problems that you may experience with your Uninterruptible Power System (UPS).
Toshiba Customer Support Center
8 a.m. to 5 p.m. (CST) - Monday through Friday
USA Toll Free [phone]
Tel [phone]
Fax [phone]
You may also contact Toshiba by writing to:
Toshiba International Corporation
13131 West Little York Road
Houston, Texas 77041-9990
Attn: UPS Product Manager
For further information on Toshiba products and services, please visit our website at:
www.toshiba.com/ind

1600EP Series Instruction Manual
This page intentionally left blank.

i
1600EP Series Instruction Manual
Table of Contents
General Safety Instructions.............................................................................1
Symbols...................................................................................................1
Signal Words ...........................................................................................2
IMPORTANT SAFETY INSTRUCTIONS ...........................................................3
QUALIFIED PERSONNEL ONLY ............................................................3
INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ ..................4
Product Description .........................................................................................5
Application and Use.................................................................................5
Output Rating...........................................................................................5
Power Backup..........................................................................................5
Power Conditioning..................................................................................5
Inspection/Storage/Disposal ...........................................................................6
Inspection ................................................................................................6
Storage ....................................................................................................6
Disposal...................................................................................................6
Installation Precautions...................................................................................7
Conductor Routing and Grounding................................................................7
Operating Precautions.....................................................................................8
Equipment Warning Labels .............................................................................9
UPS Connections .............................................................................................11
Communication Interfaces ..............................................................................12
UPS Stop Signal Operation ....................................................................13
RS-232C..................................................................................................14
RemotEye II Network Card......................................................................14
...........................................................................................15
Operating the UPS............................................................................................21
Battery Backup Time and Discharge Process .......................................21
Starting the UPS......................................................................................22
Battery Recharging..................................................................................23
Online Mode......................................................................................................24
Online Mode (Run operation) ..............................................................................24
Static-Bypass Mode (Stop operation)......................................................24
Battery Backup Mode (On batteries) .......................................................25
EPO (Emergency Power Off) Function....................................................25
Audible Alarm Functions..........................................................................26
Display and Keys..............................................................................................27
Front Panel Layout ..................................................................................27
Liquid Crystal Display (LCD) Functions...................................................27

ii 1600EP Series Instruction Manual
Operating Keys........................................................................................28
Light Emitting Diodes (LED) ....................................................................28
Display Screens................................................................................................29
Screen Arrangement................................................................................29
System Overview Screens.......................................................................29
UPS Start-Up Screens Sequence............................................................29
Data Display Screens ..............................................................................31
Special Display Screens..........................................................................32
Data Setting Screens...............................................................................33
System Warning Messages .....................................................................39
System Fault Messages ..........................................................................40
Status Change Indications.......................................................................41
UPS Protection System....................................................................................42
System Protection Features ....................................................................42
System Protection Functions ..................................................................42
Preventive Maintenance/Parts Replacement .................................................44
Preventive Maintenance ..........................................................................44
Parts Replacement ..................................................................................44
Optional Receptacle Panel Installation Instructions.....................................45
Optional MB (Maintenance Bypass) Units .....................................................46
External Layouts/Dimensions/Shipping Weights..........................................48
Dimensional Data ...................................................................................48
Electrical Conduit Knock-out Data...........................................................48
Unit and Shipping Weights ......................................................................48
Index ..................................................................................................................51

1
1600EP Series Instruction Manual
General Safety Instructions
DO NOT attempt to transport, install, operate, maintain or dispose of this equipment until you have read
and understood all of the product safety information provided in this manual.
Symbols
The symbols listed below are used throughout this manual. When symbols are used in this manual they
will include important safety information that must be carefully followed.
Safety Alert Symbol indicates that a potential
personal injury hazard exists.
Prohibited Symbol indicates DO NOT take action.
Mandatory Symbol indicates that the following
instruction is required.
Ground Symbol indicates the location of the
equipment grounding conductor.
Electrical - Voltage & Shock Hazard Symbol
indicates parts inside may cause electric shock.
Explosion Hazard Symbol indicates parts may
explode.

21600EP Series Instruction Manual
Signal Words
The signal words listed below are used throughout this manual. When the words DANGER, WARNING,
CAUTION and ATTENTION are used in this manual they will include important safety information that
must be carefully followed.
DANGER The word DANGER in capital letters preceded by
the safety alert symbol indicates that an imminently
hazardous situation exists, if not avoided, will result
in loss of life or serious injury to personnel.
WARNING The word WARNING in capital letters preceded by
the safety alert symbol indicates that a potentially
hazardous situation exists, if not avoided,
may result in loss of life or serious injury to
personnel.
CAUTION The word CAUTION in capital letters preceded by
the safety alert symbol indicates that a potentially
hazardous situation exists, if not avoided, may
result in minor or moderate injury.
CAUTION The word CAUTION in capital letters without
the safety alert symbol indicates a potentially
hazardous situation exists, if not avoided, may
result in equipment and property damage.
ATTENTION The word ATTENTION in capital letters without
the safety alert symbol indicates a potentially
hazardous situation exists, if not avoided, may
result in equipment and property damage.