Toshiba TWP-N1861UUFKW User manual

Instruction Manual
Water Puri er
TWP-N1861UUFK(W)
Please read the manual carefully before operating the water purifier.
Retain it for future reference.

1. Safety Instruction---------------------------------------------------------------------------------------------1
1-1 Safety Instructions---------------------------------------------------------------------------------------1
1-2 Packing List-----------------------------------------------------------------------------------------------4
2. Product Introduction--------------------------------------------------------------------------------------- 4
2-1 Name of parts--------------------------------------------------------------------------------------------4
2-2 Water treatment process diagram------------------------------------------------------------------4
2-3 How to use------------------------------------------------------------------------------------------------5
3. Cleaning and maintenance-------------------------------------------------------------------------------6
3-1 Trouble shooting ----------------------------------------------------------------------------------------6
3-2 Maintenance steps--------------------------------------------------------------------------------------7
4.Filter introduction-------------------------------------------------------------------------------------------- 8
4-1 Filter introduction---------------------------------------------------------------------------------------8
4-2 Filter change---------------------------------------------------------------------------------------------9
5. Technical Parameters----------------------------------------------------------------------------------------9
5-1 Basic parameter------------------------------------------------------------------------------------------9

.
1
1-1 Safety Instructions
parts
It may cause damage to the purier.

2
damage.
The

3
℃
The
lter

2-1 Name of parts
1-2 Packing List
Faucet(1PC)
2. Product Introduction
Water Purier
(1set)
Packing box
Instruction
Manual(1 copy)
1/4 PE pipe
(3m)
Instr uct ion Manual
Snap ring(8PC) Inlet ball
valve(1PC)
Faucet adapter
(optional) (1PC)
2-2 Water treatment process diagram
Integral composite lter
Tap water connection
Drinking water outlet
Main engine
Filter
Top cover
4

5
2-3 How to use
Notes:
The installation shall be conducted by professional in local sell on commission and service site.
Installation
1. Take out the product from packaging box and
put it under water groove in the kitchen.
2. Take the three-way ball valve out
and install it on tap pipe.
3. Connect the pipeline and install the faucet
according to the diagrammatic drawing of water
installation
Diagrammatic drawing of water installation
PE Pipe Towel Tissue Cup Tube Cutter Price List Electric
Drill
Screw
driver
Monkey
Wrench
Wrench
Materials needed in installation:
Water source Tap water
Pure water
1. Main engine
2. Ball valve of water inlet
3. Water faucet
Notes:
There are some dierences between drawings in manual and real object. The practice is subjected
to real object, Main materials and equipment to be installed. If you need to use faucet adapter, please
check the manual of Water purier faucet adapter.
1. Main engine 2. Ball valve of water inlet 3. Water faucet

3-1 Trouble shooting
Notes:
The following is the judgment and inspection of common abnormalities. If simple treatment cannot
be eliminated, please send it to the maintenance oce for consultation. Please do not disassemble
and repair yourself to avoid danger or damage to the water purier.
There is any problem in using, please solve as the following methods. For the fault that can not be
solved, please contact the local sell service center.

6
First use instruction
Cautions
Installation shall be carried out by professionals from local sell on commission and service site.
The installation master shall install, ush and debug the whole machine according to the
maintenance procedures.
Starting up
1.Open the three-way ball valve. 2. It is a normal phenomenon that a spot of black
water arise at rst when opening water faucet. The
suggestion is ushing for 10 mins until the water is
clear and non-tainted.
3. Cleaning and maintenance
3-1 Trouble shooting

Issues Reason Trouble shooing
Water yeild decreases
abnormally
The quality of water
is poor
The maching is leaking
Not discharging water after
exchanging lter
Making water running after
shutdown, but water faucet
does not work
 Air blocking
 Air blocking
 One compont fails
 The quality of water and source is
poor
 Not using in a long time (More than
3 days)
 The lter element failure
 please contect with the local sell service center
and exchange in time
 Make the water run rst then make power on,and
use water to wash 3-5minutes
 Identify water source as municipal tap water
 Please cut o the water source and call the national
service hotline to report the trouble.
 Please cut o the water when exchanging the lter
 Make the water run rst and use water to ush 3-5
minutes. If it did not work, please contact with the local
sell service center
 The lter is blocked.
 The lter need washing or exchanging
 The lter need exchanging
 Check the inlet ball value is opened or not
 The lter is not be exchanged in time,
then out of services
 Not opening the ball valve completely
Notes:
To ensure your water purier operating in the best operational condition and the security of drink
water, after-sales service site will make a reservation and remind you (or you can contact with local
after-sales service site) at xed period to have a maintenance for equipment and change of lter .
To ensure the service quality, you can supervise our maintenance service (“maintenance” means check,
maintain, cleaning and change).
1. Check whether the functions of machine are
normal or the water valve is closed.
2. Check whether overall appearance of
machine is out of shape.
Close ball valve of water inlet
3. Check the connection of product’s key parts,
and push the PE pipes at the joint strongly to
ensure PE pipes are inserted in place.
4. Scrub inner parts and shell of product until
there is no dust or foreign matter.
3-2 Maintenance steps
7