TOTALINE Deluxe 1H/1C User manual

Operating
Manual
Totaline®Deluxe 1H/1C and 3H/2C
Touchscreen Programmable P340 Series Thermostats
570-213
®
69-2267EFS-03

ENGLISH
Read and save these instructions.
Need Help?
Visit www.Totaline.com
® U.S. Registered Trademark.
All rights reserved.
BE CAREFUL! Never use sharp instruments, such as a pencil
or pen, to press touchscreen keys. To prevent damage to the
thermostat, always press keys with your fingertip.
This thermostat contains a Lithium battery which may contain Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
This manual covers the following models
P340 -1110: For 1 Heat/1 Cool systems
P340-1320: For up to 3 Heat/2 Cool systems
(Pull thermostat from wallplate and turn over to find model number)
M29095

P340 Series
570-213 1 69-2267EFS—03
ENGLISH
About your new thermostat
Quick reference to controls...............................2
Quick reference to status display......................3
Programming & Operation
Clock setting......................................................4
Fan setting.........................................................5
System setting...................................................6
Program schedule overrides..............................9
Vacation hold...................................................11
Special features...............................................12
Screen lock......................................................13
Screen cleaning...............................................14
Appendices
Battery installation ..........................................15
Advanced functions .........................................16
In case of difficulty..........................................21
Optional remote sensors .................................23
This thermostat is ready to go!
Your new thermostat is pre-
programmed and ready to go.
Table of contents
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not oper-
ate cooling system when outdoor
temperature is below 50˚F (10˚C).

Operating Manual
69-2267EFS—03 2 570-213
ENGLISH
Quick reference to controls
PRESS DAY(S) TO SET
PROGRAM SCHEDULE
PRESS TO SELECT
FAN OPERATION
PRESS TO SELECT
SYSTEM TYPE
PRESS TO SET
PROGRAM
SCHEDULE
PRESS TO OVERRIDE
PROGRAM SCHEDULE
PRESS TO
SET CLOCK
M29096
PRESS TO LOCK KEYPAD FOR
30 SECONDS TO CLEAN SCREEN
PRESS FOR
MORE OPTIONS
(SELECT MODELS
ONLY)
PRESS TO ADJUST
TEMPERATURE
SETTINGS

P340 Series
570-213 3 69-2267EFS—03
ENGLISH
Other display messages:
• Cool : Cooling system is activated
• Heat : Heating system is activated
• Stg2 Heat : Auxiliary heating system is activated
Quick reference to status display
M29097
CURRENT DAY
OF WEEK
FAN SETTING
SYSTEM
SETTING
CURRENT TIME TEMPERATURE
SETTING
EARLY
RECOVERY
CURRENT
INSIDE
TEMPERATURE

Operating Manual
69-2267EFS—03 4 570-213
ENGLISH
To set the current time display, press TIME, then
press s or tto adjust the time. Press and hold or to
advance the time more quickly.
Press DONE to save & exit (or press CANCEL to exit
without changing the time).
Note: The real-time clock should never require
adjustment since it automatically updates for
daylight saving time, and stores all date/time
information.
Note: To change the current week day display, see
page 17.
Clock setting
M29098
PRESS TIME
PRESS
DONE
ADJUST TIME

P340 Series
570-213 5 69-2267EFS—03
ENGLISH
Press FAN to select fan operation, then press DONE.
• On: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is on.
• Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press FAN to override the fan settings you’ve
programmed for different time periods (see page 8).
If you select On or Circ, the setting you select will
remain active until you press FAN again to select Auto
(see page 22 for more information).
Fan setting
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.
M29099
PRESS FAN

Operating Manual
69-2267EFS—03 6 570-213
ENGLISH
Press the SYSTEM button to select, then press DONE.
• Heat: Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Off: Heating and cooling systems are off.
• Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.**
• Em Heat (only for heat pumps with
auxiliary heat): Thermostat controls
Emergency and Auxiliary Heat.
Compressor is locked out.**
** Select models only
System setting
M29100
PRESS SYSTEM

P340 Series
570-213 7 69-2267EFS—03
ENGLISH
This thermostat is pre-set to use energy saving program settings.
Period 1
(6:00 am)
Period 2
(8:00 am)
Period 3
(6:00 pm)
Period 4
(10:00 pm)
Cool (Mo-Fr)Heat (Mo-Fr) Heat (Sa-Su) Cool (Sa-Su)
70 °78 °70 °78 °
62 °85 °62 °
[Or cancel period]
85 °
[Or cancel period]
70 °78 °70 °
[Or cancel period]
78 °
[Or cancel period]
62 °82 °62 °82 °
Energy saving settings for maximum cost savings

Operating Manual
69-2267EFS—03 8 570-213
ENGLISH
To adjust program schedules
1. Press PROG,then EDIT.
2. Press day buttons (MO-SU) to select day(s).
3. Press s or t to set Period 1 time for
selected day(s).
4. Press s or t to set Heat and Cool
temperature for this time period.
5. Press other time periods (Period 2, Period 3, Period
4) to set time and temperatures for each.
6. Press DONE to save & exit (or press CANCEL to exit
without saving changes).
Note: You can press CANCEL PERIOD to eliminate any unwanted
time period.
Note: Press FAN to customize fan settings for any time period
(see page 5).
M29102
SET HEAT/COOL
LEVELS
SELECT DAY(S)
SET TIME FOR PROGRAM
PERIOD TO START
PRESS EDIT
PRESS PROG

P340 Series
570-213 9 69-2267EFS—03
ENGLISH
Program schedule override (temporary)
Press s or t to immediately adjust the
temperature. This will temporarily override
the temperature setting for the current time
period.
The new temperature will be maintained only
until the time you set. When the timer expires,
the program schedule will resume and set the
temperature to the level you’ve programmed
for the current time period.
To cancel the temporary setting at any time, press
CANCEL (or PROG). The program schedule will resume.
ADJUST
TEMPERATURE
PRESS TO
SET TIMER
M29103
PRESS CANCEL OR
PROG TO RESUME
PROGRAM SCHEDULE

Operating Manual
69-2267EFS—03 10 570-213
ENGLISH
Program schedule override (permanent)
Press HOLD to permanently adjust the temperature. This
will turn off the program schedule.
Whatever temperature you set will be maintained 24
hours a day until you manually change it or press
CANCEL (or PROG) to cancel “Hold” and resume the
program schedule.
ADJUST
TEMPERATURE
PRESS
HOLD
M29104
PRESS CANCEL OR
PROG TO RESUME
PROGRAM SCHEDULE

P340 Series
570-213 11 69-2267EFS—03
ENGLISH
Vacation hold
This feature can suspend the program sched-
ule for extended periods of time.
Press s or tto set the temperature you want, then
press s or tto set the time of day you want the
schedule to resume when you return. Press HOLD
twice, then press s or tto select the number of
days.
Whatever temperature you set will be main-
tained 24 hours a day for the number of days
you select. After this number of days have
elapsed, the previously programmed schedule
will resume at the time you set.
If you return earlier than expected, press CANCEL
(or PROG) to cancel “Hold” and resume the program
schedule.
M29105
SET TEMPERATURE
PRESS TO SET TIME FOR SCHEDULE TO RESUME
PRESS HOLD TWICE
PRESS TO SELECT NUMBER OF DAYS

Operating Manual
69-2267EFS—03 12 570-213
ENGLISH
Special features
Auto Changeover: When set to Auto, the thermostat automatically selects heating
or cooling depending on the indoor temperature.
Early Recovery: This feature allows the thermostat to “learn” how long the furnace
and air conditioner take to reach programmed temperature settings, so the tem-
perature is reached at the time you set. For example: Set Period 1 time to 6 am, and
the temperature to 70°. The heat will come on before 6 am, so the temperature is 70°
by the time you wake at 6. The message “Recovering” is displayed when the system
is activated before a scheduled time period.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.

P340 Series
570-213 13 69-2267EFS—03
ENGLISH
Screen lock
To prevent tampering, the screen can be par-
tially or fully locked.
When partially locked, the screen displays for sev-
eral seconds if a locked key is pressed. Press any
unlocked key while appears on the screen.
When the screen is fully locked, no keys
function. To lock or unlock the screen, see
advanced function 0670 on page 20.
M29106
SEE ADVANCED FUNCTION
0670 (PAGE 20) FOR
SCREEN
LOCK OPTIONS

Operating Manual
69-2267EFS—03 14 570-213
ENGLISH
Screen cleaning
Press CLEAN to lock the screen for cleaning. The screen
will remain locked for 30 seconds so you can clean the
screen without changing any settings.
After 30 seconds, press DONE to resume normal opera-
tion, or press CLEAN again if you require more time for
cleaning.
Note: Do not spray any liquid directly on the
thermostat. Spray liquids onto a cloth, then use
the damp cloth to clean the screen. Use water or
household glass cleaner. Avoid abrasive cleansers.
M29107
PRESS CLEAN
SCREEN LOCK TIMER (30 SECONDS)

P340 Series
570-213 15 69-2267EFS—03
ENGLISH
Battery replacement
Batteries are optional (to provide backup
power) if your thermostat was wired to run on
AC power when installed.
Install fresh batteries immediately when the BATT LO
warning begins flashing. The warning flashes about 30
days before batteries are depleted.
Even if the warning does not appear, you
should replace batteries once a year, or
before leaving home for more than a month.
Grasp thermostat and pull
to remove fom wallplate
Insert 3 fresh AAA alkaline batteries
M29108

Operating Manual
69-2267EFS—03 16 570-213
ENGLISH
Advanced functions
1. Press SYSTEM.
2. Press and hold blank
center key until the
display changes.
3. Change settings as
required (see pages
17-20).
4. Press DONE to exit &
save changes.
M29110
FUNCTION SETTING
PRESS / TO
SELECT FUNCTION
PRESS / TO
CHANGE SETTING

P340 Series
570-213 17 69-2267EFS—03
ENGLISH
Advanced functions
Year setting (first two digits)
Function
0120 Press s/t to change the first two digits of the year:
Options: 20 = Year 20xx
21 = Year 21xx
Year setting (second two digits)
Function
0130 Press s/t to change the last two digits of the year:
Options: 01 - 99 (i.e., 2001 - 2099)
Month setting
Function
0140 Press s/t to change the current month:
Options: 01 - 12 (i.e., January - December)
Date setting
Function
0150 Press s/t to change the current date:
Options: 01 - 31

Operating Manual
69-2267EFS—03 18 570-213
ENGLISH
Advanced functions
Program schedule on/off
Function
0160 Press s/t to turn the program schedule on or off:
Options: 0 Program schedule is off. Thermostat is non-programmable.
4 Program schedule is on (7-day programmable).
Temperature format (°F/°C)
Function
0320 Press s/t to set the temperature display format:
Options: 0 Fahrenheit
1 Celsius
Daylight savings time on/off
Function
0330 The thermostat is pre-programmed to automatically adjust to daylight savings time.
Press s/t to select an option:
Options: 0 Off: No adjustment for daylight savings time
1 On: Auto-change to daylight savings time (through 2006, and for areas that
do not use the new 2007 DST calendar)
2 On: Auto-change to daylight savings time (2007 and beyond, for areas that
use the new 2007 DST calendar)