TOTALINE Easy 1H/1C User manual

Totaline®Basic 1H/1C & 2H/1C
Programmable Thermostats
Thermostats programmables
Termostatos programables
Operating Manual
Mode d’emploi
Manual de Uso
Set
Hold
Run
On
Auto
Fan
Off Cool
Heat
570-208
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 1 Tuesday, October 21, 2008 2:42 PM

400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 2 Tuesday, October 21, 2008 2:42 PM

ENGLISH
Totaline Basic 1H/1C & 2H/1C
This manual covers the following models:
P310-1110: For 1-Heat / 1-Cool systems
P310-1
210 : For 2-Heat / 1-Cool heat pump systems
(Remove thermostat from wallplate and find model number on the wallplate.)
Need Help?
For assistance with this product please visit www.totaline.com.
Read and save these instructions.
® U.S. Registered Trademark. Patents pending.
CAUTION: EQUIPMENT DAMAGE HAZARD.
To prevent possible compressor damage, do not use Cooling mode when the
outdoor temperature is below 50 °F (10 °C).
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page -1 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
ENGLISH
Overview
Thermostat features ............................. 1
Quick start............................................ 2
Quick reference to controls .................. 3
Quick reference to display.................... 4
Programming & Operation
Setting the clock................................... 5
System switch (Heat/Cool)................... 6
Fan switch (Auto/On)............................ 7
Using the schedule..........................8-10
Temporary schedule override..............11
Permanent schedule override ............ 12
Early Recovery................................... 13
Compressor protection....................... 13
Appendices
Battery replacement ........................... 14
In case of difficulty.............................. 15
Customer assistance.......................... 16
Limited two-year warranty .................. 17
Table of contents
Your new thermostat is pre-programmed
and ready to go!
See page 2 for quick start.
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 0 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
1
ENGLISH
Your new Totaline thermostat has been designed to give you many years of reliable service
and easy-to-use, push-button climate control.
Features
• Backlit display is easy to read
• Displays ambient (measured) temperature at all times
• One-touch access to setpoint temperature
• Energy Star®compliant to greatly reduce your heating/cooling expenses
• Separate programmable weekday/weekend schedules (5+2 day programming)
• Temporary and permanent override of schedule
• Early Recovery ensures right temperature at the right time
• Built-in compressor protection
About your new thermostat
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 1 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
2
ENGLISH
Simply perform the three steps below and the thermostat is in operation:
nSet the clock..................................................................................................See page 5
oSelect whether to heat or cool.......................................................................See page 6
pSelect whether to run the fan continuously or only when needed.................See page 7
Your thermostat is pre-programmed with Energy Star®settings. If you do not wish to use
these settings, you can:
Modify the schedule ....................................................................................See page 10
Temporarily override the schedule .............................................................. See page 11
Permanently override the schedule.............................................................See page 12
This thermostat is ready to go
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 2 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
3
ENGLISH
Quick reference to controls
System switch (see page 6)
•Cool: System is in Cooling mode.
•Off: System is off.
•Heat: System is in Heating mode.
•Em Heat: System is in
Emergency Heat mode.
Fan switch (see page 7)
•On: Fan runs continuously.
•Auto: Fan runs only when
heating or cooling is taking place.
Up/Down buttons
Press to adjust temperature.
Screen
Lit for 12 seconds when
you press any button.
Press to set clock,
day or schedule
(see pages 5 & 10).
Press to override
schedule and hold
temperature (see
page 12).
Press to run
(follow) schedule
(see page 8).
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 3 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
4
ENGLISH
Quick reference to display
* When Heat or Cool is flashing, compressor protection is
engaged (see page 13).
** Applies to P310-1210 model only.
Temperature
The ambient (measured)
temperature is normally
displayed. To view the setpoint
temperature, press either
temperature adjustment button
once.Thesetpointtemperature
will appear for five seconds.
System status
• Cool :
Cooling is activated. *
• Heat :
Heating is activated. *
• Stg2:
Auxiliary heat is activated. **
Low-battery warning (see page 14)
Setpoint indicator
Appearswhenthe setpoint
temperature is displayed.
Clock Schedule period
Permanent schedule
override (see page 12)
Temporary schedule
override (see page 11)
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 4 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
5
ENGLISH
nPress the Set button. Set Time will appear on the screen
and the time display will flash.
oPress the Up or Down button to set the time.
pPress the Set button again. Set Day will flash on the screen.
qPress the Up or Down button to select the day of the week.
rPress the Run button to save the changes & exit. (The
changes are also saved if you do not press any button for 60
seconds.)
NOTE: The clock has lost its settings when the time display flashes. If the thermostat is
following the schedule, it will use the temperature settings programmed for Period 1 of the
weekdays until you readjust the clock.
Set the clock
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 5 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
6
ENGLISH
System switch
Use the System switch to place the system in one of the
following modes:
•Cool: System is in Cooling mode.
•Off: System is off.
•Heat: System is in Heating mode.
•Em Heat: System is in Emergency Heat mode. Only
auxiliary heating can be activated. The compressor is
disabled. (This mode is available on the P310-1210 model
only.)
CAUTION: EQUIPMENT DAMAGE HAZARD.
Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 6 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
7
ENGLISH
Fan switch
Use the Fan switch to select the fan operation.
•Auto: The fan runs only when heating or
cooling is activated (commonly used
setting).
•On: The fan runs continuously. Use this
setting for improved air circulation or for
more efficient air cleaning.
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 7 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
8
ENGLISH
Press the Run button to follow the programmed schedule. For maximum energy savings
while maintaining comfort, you can program the schedule such that the temperature is at an
economical level when you sleep or leave for work and at a comfortable level when you are
awake and at home. You can program up to four periods per day:
To program a period, you need to set its start time and its two temperature settings (one
when the thermostat is in cooling mode and another one when it is in heating mode). The
same settings are used every day from Monday to Friday and another set of settings are
used for Saturday and Sunday. For example, you could program all four periods for the
weekdays but only two periods (Period 1 and Period 4) for the weekends.
Using the schedule
Period 1 Starts when you wake up
Period 2 Starts when you leave for work
Period 3 Starts when you return home
Period 4 Starts when you go to sleep
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 8 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
9
ENGLISH
The thermostat has been programmed with Energy Star®settings. These settings can
reduce your energy bills by 33%. See the next page if you wish to modify the settings.
Energy Star®settings
Period Weekdays Weekends
Start time Heat Cool Start time Heat Cool
16:00 am 70 °F (21 °C) 75 °F (24 °C) 6:00 am 70 °F (21 °C) 75 °F (24 °C)
28:00 am 62 °F (16.5 °C) 83 °F (28.5 °C) - - - - - -
36:00 pm 70 °F (21 °C) 75 °F (24 °C) - - - - - -
410:00 pm 62 °F (16.5 °C) 78 °F (25.5 °C) 10:00 pm 60 °F (15.5 °C) 78 °F (25.5 °C)
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 9 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
10
ENGLISH
n Press the Set button 3 times until Set Program appears. The start time of Period 1 of
the week days (Mon-Fri) will flash.
oPress the Up or Down button to set the time.
pPress the Set button. The temperature setting for that period will flash.
qTo program the temperature settings for the cooling mode, place the System
switch in Cool. To program the temperature settings for the heating mode, place
the switch in Heat.
rPress the Up or Down button to set the temperature.
sPress the Set button. The start time of the next period will flash.
tRepeat steps 2 through 6 for each of the remaining periods.
uOnce all changes are made, press the Run button to save them and exit.
(The changes will automatically be saved if you do not press any button for 60
seconds.)
Modifying the schedule
Period 1 for the
weekdays is set to 6
a.m. and 70 °F.
To skip a period
(except period 1),
press the Hold button
for 4 sec. while that
period is displayed.
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 10 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
11
ENGLISH
To temporarily ignore the schedule, press the Up or
Down button until the desired temperature is
displayed. The word Temporary will appear on the
screen and the period display will flash to indicate
that the current period has been overridden. The
new temperature will be used until the next period
begins.
NOTE: Pressing the Up or Down button once will display the setpoint temperature. To
change the setpoint temperature, press either button more than once.
Press the Run button if you wish to cancel the temporary setting before the beginning of the
next period.
Temporary override of schedule
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 11 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
12
ENGLISH
To permanently ignore the schedule, press the Up
or Down button until the desired temperature is
displayed. Then, press the Hold button to maintain
the new temperature indefinitely. The word HOLD
will appear on the screen.
Press the Run button if you wish to cancel the
override and resume the schedule. The word
HOLD will disappear and the thermostat will be set
to the temperature programmed for the current
period.
Permanent override of schedule
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 12 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
13
ENGLISH
Early Recovery allows the thermostat to “learn” how long your furnace or air conditioner takes to
reach the set temperature. Simply program the desired times and desired temperatures into the
schedule. The thermostat will determine when to activate heating or cooling so that the desired
temperature is attained at the desired time.
Example: If you set the Period 1 to 6 a.m. and the temperature to 70 °F (21 °C), the heat will come
on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.
Your thermostat has a feature that helps prevent damage to the compressor of your air
conditioning or heat pump system. Because damage can occur if the compressor is restarted too
soon after shutdown, this feature forces the compressor to wait 5 minutes before restarting. During
the wait time, the message Cool or Heat flashes on the screen. When the safe wait time has
elapsed, the message stops flashing and the compressor turns on.
Early Recovery
Built-in compressor protection
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 13 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
14
ENGLISH
NOTE: Batteries are optional (serving as backup power) only if your thermostat is connected to 24 VAC.
Install two fresh AAA batteries when the low-battery icon flashes
on the screen. The icon appears for 60 days before the batteries
are depleted.
Replace batteries once a year, or when you will be away for more
than a month.
Most settings are stored in non-volatile (permanent) memory. Only
the clock and the day must be set if the thermostat was without AC
power or batteries.
NOTE: The low-battery icon will not appear when the batteries are
depleted if the thermostat is connected to 24 VAC.
Battery replacement
Set the System switch to Off before removing the batteries. Otherwise, the
heating/cooling system could remain activated even when batteries are
removed.
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 14 Tuesday, October 21, 2008 2:42 PM

Totaline Basic 1H/1C & 2H/1C
15
ENGLISH
In case of difficulty
Screen is blank. • Check circuit breaker and reset if necessary.
• Ensure the heating/cooling system is powered up.
• Ensure the furnace door is properly closed.
• Ensure two fresh AAA alkaline batteries are correctly installed.
Temperature settings cannot be
changed. •TheSystem switch is off. • You are setting the temperature outside its allowable range:
• Heat: 40 °F to 90 °F (4.5 °C to 32 °C).
• Cool: 50 °F to 99 °F (10 °C to 37 °C).
Cool or Heat is flashing. • The compressor protection delay is underway. Wait for the delay
to end (maximum of 5 minutes).
HI appears on the screen. • The ambient (measured) temperature is above 122 °F (50 °C).
LO appears on the screen. • The ambient (measured) temperature is below 32 °F (0 °C).
E1 appears on the screen. • The temperature sensor circuit is opened. Replace the thermostat.
E2 appears on the screen. • The temperature sensor circuit is shorted. Replace the thermostat.
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 15 Tuesday, October 21, 2008 2:42 PM

Operating Manual 570-208
16
ENGLISH
Customer assistance
For assistance with this product, visit our website at www.totaline.com.
400-636-001-A (69-2277EFS prog OEM636 user manual).book Page 16 Tuesday, October 21, 2008 2:42 PM