Tower Hobbies TXP30PET Operator's manual

T108000PETS
TXP30PET Bagless
Pet Upright
Vacuum Cleaner
SAFETY AND INSTRUCTION MANUAL
PLEASE READ CAREFULLY
*Subject to registering your Extended Guarantee online at www.towerhousewares.co.uk.

2
GREAT BRITISH DESIGN, INNOVATION
AND EXCELLENCE SINCE 1912
Since the turn of the 20th century, Tower has been
designing, developing and manufacturing housewares and
small appliances used by millions of households throughout
the UK and beyond. During the 1960s, the rise in popularity
of pressure cooking saw Tower become the UK’s largest
producer of pressure cookers, right through into the late
1980s. In recent years the Tower brand has been reborn with
an exciting and varied range of housewares and electrical
appliances that have quickly reinstated the brand’s richly
deserved status as a household name.
Visit
www.towerhousewares.co.uk
for more fantastic products.

3
Contents:
Thank you for purchasing this appliance from the
Tower range.
Please read this manual carefully BEFORE using the
appliance for your own safety.
It has been designed to provide many years of
trouble-free use.
There are many benets to using a Tower Upright
Vacuum Cleaner:
• Powerful 750W cyclonic performance.
• 12Kpa 100W Suction power.
• 2.5 Litre dust capacity minimises the need for
emptying.
• 2 in 1 crevice tool and oor brush allows for more
versatile cleaning.
• Extra-long 6 metre power cord offers added
mobility when cleaning.
• Includes pet brush, ideal for picking up animal
hair.
1. Specications
Components and
structure
2. Technical Data
3. Important Safety
Information
4. Before First Use
5. Using your Appliance
6. Troubleshooting
7. Recycling
8. Cleaning & Care
9. Wiring Safety
10. Warranty Information
See back page for Customer
Service Information.

4
This box contains:
Instruction Manual
Vacuum Cleaner
Crevice/brush multi-tool
Rectangular lter
Sponge lter
Cylinder lter
Pet Brush
1. Handle
2. Hose
3. Dust tank release button
4. Suction release valve
5. Dust tank lid
6. Dust Tank
7. Filter assembly
8. 2-in-1 brush/crevice tool
9. Floor head
10. Floor level selector dial
11. Brush roll
12. Cable clip
13. Handle pole
14. Hose hook
15. Upper cable storage hook
16. Lower cable storage hook
17. Hose connector (back of unit)
18. Power On/Off button
1 - Specications:
Structure of
your appliance:
2
13
12
15
16
17
18
14
3
4
5
1
7
8
9
10
11
6

5
Description: TXP30PET Bagless Pet Upright Vacuum Cleaner
Model: T108000PETS
Voltage: 220-240V ~ 50/60Hz
Wattage: 750W
Documentation
We declare that this product conforms to the following product legislation in
accordance with the following directive(s):
2014/30/EU Electromagnetic Compatibility Directive.
2014/35/EU Low Voltage Directive.
2011/65/EU Restriction of Hazardous Substances Directive.
RK Wholesale LTD Quality Assurance, United Kingdom.
2 - Technical Data:
Should you encounter problems or require a replacement part, contact the Tower
Customer Support Team: [phone].
Some spare parts may be ordered from the Tower website.
Your warranty becomes void should you decide to use non Tower spare parts.
Spare parts can be purchased from www.towerhousewares.co.uk
Guarantee for spare parts:
The spares and accessories are guaranteed for 1 year from date of purchase.
The main body and housing are guaranteed for the extended free warranty subject
to registration.
If any defect arises due to faulty materials of workmanship, the faulty products must
be returned to the place of purchase within 12 months from the date of purchase.
Refund or replacement is at the discretion of the retailer.

6
Please read these notes carefully BEFORE using your
Tower appliance
3 - Important Safety Information:
• Check that the voltage
of the main circuit
corresponds with the
rating of the appliance
before operating.
• If the supply cord or
appliance is damaged,
stop using the appliance
immediately and
seek advice from the
manufacturer, its service
agent or a similarly
qualied person.
• DO NOT let the cord
hang over the edge of a
table or counter or let it
come into contact with
any hot surfaces.
• DO NOT carry the
appliance by the power
cord.
• The use of accessory
attachments is not
recommended by the
appliance manufacturer
apart from those
supplied with this
product. DO NOT use
extension cords with the
appliance.
• DO NOT pull the plug
out by the cord as this
may damage the plug
and/or the cable.
• Switch off at the wall
socket then remove the
plug from the socket
when not in use or
before cleaning.
• Switch off and
unplug before tting
or removing tools/
attachments, after use
and before cleaning.
• Close supervision is
necessary when any
appliance is used by or
near children.
• Children should not play
with the appliance.
• This appliance can
be used by children
aged from 8 years and
above and persons
with reduced physical,
sensory or mental
capabilities or lack
of experience and
knowledge if they have
been given supervision
or instruction
concerning use of the
appliance in a safe way
and understand the
hazards involved.
• Cleaning and user
maintenance should
not be undertaken
by children without
supervision.

7
• Take care when any
appliance is used near
pets.
• Not suitable for carpets
with long bres as the
bristles will damage the
bres.
• Keep the vacuum
cleaner moving over
the carpet surface
at all times to avoid
damaging the carpet
bres.
• DO NOT use this
product for anything
other than its intended
use.
• DO NOT immerse cords,
plugs or any part of the
appliance in water or
any other liquid.
• This appliance is for
household use only.
• DO NOT use the
appliance outdoors.
• Keep hair, loose
clothing, ngers and all
body parts away from
moving parts.
• DO NOT use to pick up
ammable liquids such
as gasoline or use in an
area where they might
be present.
• DO NOT use the
appliance without the
dust container lter in
place.
• DO NOT pick up
anything that is burning
or smoking such as
cigarettes, matches or
hot ashes.
• Use extra care when
cleaning on stairs.
• Use only manufacturer’s
recommended
accessories.
• DO NOT pull cord, use
cord as a handle, close
a door on cord, or pull
cord around sharp
edges or corners.
• DO NOT run vacuum
cleaner over the cord.
Keep cord away from
heated surfaces.
• This product is tted
with a thermal cut-out,
which will activate if the
motor overheats due
to blocked air inlets. If
the appliance cuts out,
allow it to cool for 1 hour,
then empty the dust
container and clean all
of the lters.
• In the unlikely event
the appliance develops
a fault, stop using
it immediately and
seek advice from the
Customer Support
Team:
[phone]

8
Read all instructions and safety information carefully before rst use. Please retain
this information for future reference.
1. Remove the product from the box.
2. Remove any packaging from the product.
3. Please retain all packaging until you have checked and counted all the parts
and the contents against the parts list.
4. Dispose of the packaging in a responsible manner.
Note: Ensure the vacuum cleaner is fully assembled before attempting to use it.
4 - Before First Use
Connecting the Pole:
1. To connect the pole to the main body of the vacuum, begin by aligning the
handle pole with the top of the vacuum.
2. Once the two parts are properly aligned, push the handle down until the screw
hole in the pole matches the hole in the body of the vacuum.
3. Once the two holes are aligned, slot the screw provided through them, and
tighten it using a crosshead screw driver.
4. Your vacuum cleaner is now ready for use.
Connecting the Accessories:
1. This vacuum cleaner comes complete with a 2-in-1 dusting brush and crevice
tool, ideal for light dusting or vacuuming in corners or narrow gaps, as well as a
pet brush, ideal for picking up animal hair.
2. To use the included tools, begin by removing the end of the hose by twisting
it anti-clockwise and pulling it upwards, towards you and away from the main
part of the hose.
3. Once you have removed the hose end, attach the required tool to the main
part of the hose. Ensure it is rmly connected to the tube before turning on
the vacuum cleaner, to prevent it from falling off whilst in use.
4. To remove the an attached tool, grip it rmly, then pull it towards you and away
from the hose.
Note: The 2-in-1 accessory is set to the crevice tool function by default. To use the
dusting brush function, simply slide the brush towards the front of the tool until
it clicks into place. To retract the brush, press the button on the side of the tool to
loosen it, then push it backwards until it slots into place.
Note: Always ensure the vacuum cleaner is upright when using an attachment
tool, to prevent the brush roller from damaging oors and surfaces. DO NOT tilt the
vacuum cleaner or position it at an angle when using the attachment tool.
5 - Using Your Appliance

9
Releasing the Power Cable:
1. To use your vacuum cleaner, start by unhooking the power cable from the
on-board storage hook, located at the back of the vacuum cleaner. To do this,
unlock the storage hook by rotating it 180 degrees, then carefully unravel the
cable to your desired length.
Note: The power cord can be secured into the clip at the top of the handle while
vacuuming, to reduce the risk of tripping.
2. Once the power cable is at a sufcient length, plug the vacuum cleaner into a
mains socket, making sure the switch is turned to the ‘On’ position.
Adjusting the Floorhead:
1. Before turning the vacuum cleaner on, unlock the oor head by pushing down
on it while pulling the main body of the vacuum cleaner diagonally towards
you.
2. Once the oorhead has been released, use the dial at the centre to adjust it as
necessary to t each type of oor. Turn this dial clockwise to raise the oorhead,
or anti-clockwise to lower it.
3. Once the vacuum is unlocked and ready for use, press the Power On/Off
button at the back of the unit to turn it on.
Note: When cleaning stairs, always position the vacuum cleaner at the bottom of
the staircase, so that it rests against the bottom step. Use the 2-in-1 tool attached to
the vacuum hose to clean stairs and steps.

10
Problem Possible Solution
The vacuum will not
work
Ensure the vacuum cleaner is plugged into a mains socket and that
the socket switch is turned on.
Check if any fuses on your main board have tripped.
The vacuum will
not pick-up or the
suction power is
weak
The dust container may be full, or the lters may require cleaning.
Empty the dust container and clean the lters.
There may be blockages in the lters, hose or brush roller. Check
for blockages and clean the hose, lters and roller as detailed in the
‘Cleaning and Care’ section.
The oorhead may be set to the incorrect height. Ensure the
oorhead is at a suitable height for the type of oor being cleaned,
and adjust as necessary.
The belt may be worn. Ensure the belt is in working order, and
replace as necessary, as detailed in the ‘Replacing the Belt’ section.
Dust is escaping
from the vacuum
The lter may not be installed correctly, or the dust container may
be full. Empty the dust container and reassemble the lter system.
The vacuum is
making an unusual
sound or hissing.
The airow may be restricted or blocked. Check for blockages and
clean the lters and hose as detailed in the ‘Cleaning and Care’
section.
The vacuum is
difcult to push.
The oorhead may be set to the incorrect height. Ensure the
oorhead is at a suitable height for the type of oor being cleaned,
and adjust as necessary.
6 - Troubleshooting
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown here may not be disposed of in domestic
rubbish. You are required to dispose of old electrical and electronic appliances like
this separately.
Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to
information about the recycling of electrical items.
Please visit www.weeeireland.ie for access to information about the recycling of
electrical items purchased in Ireland.
The WEEE directive, introduced in August 2006, states that all electrical items must
be recycled, rather than taken to landll.
Please arrange to take this appliance to your local Civic Amenity site
for recycling, once it has reached the end of its life.
7 - Recycling

11
Cleaning:
1. Always remove the plug from the wall socket before you clean the unit.
2. Release the locking block to open up the top half of the unit housing.
3. Shake the contents into a dustbin until fully empty.
4. Replace the upper portion of the housing and fasten the locking block to
secure it into place.
Emptying the Dust Tank:
Note: Ensure the vacuum cleaner is turned off and unplugged from the mains
before emptying the dust tank.
1. To remove the dust tank from the vacuum cleaner, press the release button
at the top of the tank, then pull it rmly towards you and away from the main
body of the vacuum.
2. Once you have removed the dust tank, hold it over a rubbish bin and pull the
latch at the bottom of the tank to open it and tip the contents into the bin.
3. When the tank has been emptied, check the cylinder lter and tap it over the
bin to remove any dust or debris contained within.
Cleaning the Bin and Cylinder Filter:
1. To access and clean the cylinder lter, twist the dust tank lid counter-clockwise
to unlock it, then pull it up and away from the tank container.
2. Once the lid has been taken out of the tank, grip the bottom part of the lter
rmly and twist it counter-clockwise to detach the lter housing from the lid.
3. Pull the lter housing away from the lid and retrieve the cylinder lter located
inside.
4. Tap both parts of the cylinder lter over a rubbish bin to dispose of any dirt or
debris located inside.
5. When the lter is clean of debris, rinse it, the tank and the lter housing under
warm running water.
6. Leave the lter to dry for at least 24 hours before placing it back into the lter
housing. Ensure the lter housing and dust tank are thoroughly dry before
attempting to use the vacuum again.
7. Re-assemble the dust tank. Use the symbols on the lid and body of the tank as
guidelines when connecting the parts together; align the white arrow on the
lid with the open padlock symbol on the body of the tank, then twist the lid
towards the locked padlock symbol until it clicks into place.
Cleaning the Rectangular Filter:
1. To clean the rectangular lter, rst remove the dust tank from the vacuum
cleaner. To remove the tank, push down the button at the top of the tank
housing to release it, then pull it away from the main body of the vacuum.
2. The rectangular lter will now be visible on the rear wall of the vacuum cleaner.
3. To remove the lter, push down the tab at the top of the lter casing and pull it
towards you.
4. Once the lter has been removed from the body of the vacuum, tap it against
a rubbish bin to dispose of any debris, then wash it under running water until
clean.
8 - Cleaning & Care

12
5. Leave the lter to dry thoroughly for at least 24 hours before attempting to use
it again.
6. Once the lter is dry, put it back into the vacuum cleaner, ensuring it locks into
place, and reattach the dust tank to the body of the vacuum.
7. The vacuum cleaner is now ready for normal use.
Cleaning the Sponge Filter:
1. To clean the sponge lter, rst remove the dust tank from the vacuum cleaner.
To remove the tank, push down the button at the top of the tank housing to
release it, then pull it away from the main body of the vacuum.
2. The round sponge lter will now be visible at the base of the vacuum.
3. To remove the sponge lter, simply pull it out and away from the base of the
vacuum.
4. Once the lter has been removed from the body of the vacuum, tap it against
a rubbish bin to dispose of any debris. Alternatively, you can also wash the lter
under running water until clean.
5. Once the lter is clean, put it back into the vacuum cleaner and reattach the
dust tank to the body of the vacuum.
Note: If the lter has been washed, ensure it is thoroughly dry before placing it back
into the vacuum cleaner.
6. The vacuum cleaner is now ready for normal use.
Changing the Vacuum Belt:
1. To change the vacuum cleaner’s belt when it is worn out or damaged, begin by
laying it face down on a at surface, so that you can access the base.
2. Once the inside of the vacuum is accessible, reach in and unhook the motor
belt by sliding it out of and away from the motor spindle.
3. Once the worn or damaged belt has been taken out of the motor, remove the
brush roll from the vacuum.
4. Hook the replacement belt over the brush roll and motor spindle, ensuring the
belt rests on the section in-between the two grooves on the brush roll.
5. Pull the brush assembly back down into the casing. Ensure the at edge of the
brush roll is facing outwards.
6. Before attempting to use the vacuum cleaner again, use your hand to rotate
the brush assembly and ensure it moves freely. If it does not , disassemble the
relevant section and repeat the steps above until the brush roll rotates freely.
7. Your vacuum cleaner is now ready for use.
Storing the Appliance:
Note: Before storing the vacuum, unplug it from the mains.
1. When storing the vacuum cleaner, rst remove the 2-in-1 multi-tool from the
hose and place it on the-board storage holder. Then, wrap the cord around the
two storage hooks at the back of the hoover
2. Store the appliance in an upright position, a cool, dry place, preferably inside its
original packaging.

13
WARNING:
This appliance is double insulated.
Do not connect any wire to the earth terminal.
9 - Wiring Safety for UK Use Only
IMPORTANT
As the colours in the mains lead of this
appliance may not correspond with
the coloured markings identifying the
terminals in your plug, please proceed
as follows:
The wires in the mains lead are
coloured in accordance with the
following code:
Blue neutral [N] Brown
live [L]
Plug Fitting Details (Where Applicable).
The wire coloured blue is the neutral
and must be connected to the
terminal marked [N] or coloured black.
The wire coloured brown is the live
wire and must be connected to the
terminal marked [L] or coloured red.
On no account must either the brown
or the blue wire be connected to the
[EARTH] terminal .
Always ensure that the cord grip is
fastened correctly.
The plug must be fitted with a fuse
of the same rating already fitted and
conforming to BS 1362 and be ASTA
approved.
If in doubt consult a qualified
electrician who will be pleased to do
this for you.
Non-Rewireable Mains Plug.
If your appliance is supplied with a
non-rewireable plug fitted to the
mains lead and should the fuse need
replacing, you must use an ASTA
approved one (conforming to BS 1362
of the same rating).
If in doubt, consult a qualified
electrician who will be pleased to do
this for you.
If you need to remove the plug –
disconnect it from the mains – and
then cut it off of the mains lead and
immediately dispose of it in a safe
manner. Never attempt to reuse the
plug or insert it into a socket outlet as
there is a danger of an electric shock.
Fuse
Neutral
(Blue)
Live
(Brown)

14
This product is guaranteed for 12 months
from the date of original purchase.
If any defect arises due to faulty materials
of workmanship, the faulty products must
be returned to the place of purchase.
Refund or replacement is at the discretion
of the retailer.
The Following Conditions Apply:
• The product must be returned to the
retailer with proof of purchase or a
receipt.
• The product must be installed and
used in accordance with the
instructions contained in this
instruction guide.
• It must be used only for domestic
purposes.
• It does not cover wear and tear,
damage, misuse or consumable parts.
• Tower has limited liability for incidental
or consequential loss or damage.
This guarantee is valid in the UK and Eire
only.
The standard one year guarantee is only
extended to the maximum available for
each particular product upon registration
of the product within 28 days of purchase.
If you do not register the product with us
within the 28 day period, your product is
guaranteed for 1 year only.
To validate your extended warranty, please
visit www.towerhousewares.co.uk and
register with us online.
Please note that length of extended
warranty offered is dependent on product
type and that each qualifying product
needs to be registered individually in order
to extend its warranty past the standard
1 year.
Extended warranty is only valid with proof
of purchase or receipt.
As a thank you for purchasing
one of our fantastic products,
we are offering you an extra
2 years peace of mind in
addition to your 1 year
guarantee.
To receive your extra 2 year
guarantee, register your
appliance online within 28
days of purchase by visiting
www.towerhousewares.co.uk
10 - Warranty

15
Notes:

thank you!
We hope you enjoy your appliance for many years. As a thank you for
purchasing one of our fantastic products, we are offering you an extra
2 years peace of mind.
*To receive your extra 2 years guarantee, register your appliance online
within 28 days of purchase by visiting:
www.towerhousewares.co.uk
Should you have a problem with your appliance, or need any spare parts,
please call our Customer Support Team on:
[phone]
0120.V2
Your warranty becomes void should you
decide to use non Tower spare parts.
Spare parts can be purchased from
www.towerhousewares.co.uk