TP-Link kasa smart KL400L5 User manual

User Guide
Kasa Smart Light Strip
KL400L5 / KL400L10
1910013038 REV1.0.0
© 2021 TP-Link

Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Set Up Your Smart Light Strip·························· 3
Install Your Smart Light Strip···························· 6
Main Device Control·············································· 8
Congure Your Smart Light Strip··················· 9
Create Scenes························································15
Schedule A Scene················································17
Auto-O Timer·······················································18
Reset Your Smart Light Strip··························19
Works with Kasa····················································20
Authentication························································21

1
About This Guide
This guide provides a brief introduction to Kasa Smart Light Strip and the Kasa Smart app, as well as regulatory information.
Features available in Kasa may vary by model and software version. Kasa availability may also vary by region. All images, steps, and descriptions in this
guide are only examples and may not reect your actual Kasa experience.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
Support
• Specic product information can be found on the product page at https://www.tp-link.com/.
• A Technical Community is provided for you to discuss our products at https://community.tp-link.com/.
• Our Technical Support contact information can be found at the Help center of the Kasa Smart app and the Contact Technical Support page
at https://www.tp-link.com/support/.
• Videos about how to congure the Smart Light Strip features can be found on the Setup Videos page at
https://www.tp-link.com/support/setup-video/#smart-bulbs.

2
Introduction
The Light Strip is part of the Kasa smart home family of products, including plugs, switches, cameras and more. You can simply download the Kasa
Smart app, connect to Wi-Fi and enjoy. No special hardware is needed. 16 color zones and millions of colors are available for you to pick from and
create your own scenes.
You can also control multiple smart home devices with the Kasa Smart app or use your voice for added convenience. With Kasa, your home is never
more than a few taps away.
• Multicolor - Oers endless lighting possibilities with 16 million colors and dimming capabilities.
• Voice Control - Turn on or o, and change colors with simple voice commands.
• Set Schedules - Run your Light Strip automatically to t any event with the Kasa Smart app.
• Flexible and Easy Install - The exibility to bend and cut* allows you to stick it or place it in the exact spot you desire.
*Once cut, it cannot be reattached. Prevent accidental shocks by removing its power and then cutting along the strip’s indicator lines.
• Group and Scenes - Combine your strip with other Kasa devices for seamless control with a single tap.

3
Set Up Your Smart Light Strip
Follow the steps below to set up your Light Strip via the Kasa Smart app.
Step 1. Download Kasa Smart App
Go to Google Play or the App Store or scan
the QR code below to download and install the
Kasa Smart app.
Step 2. Log In to Kasa Smart App
Open the app and use your TP-Link ID to log in. If
you don’t have a TP-Link ID, tap Create Account
and the app will guide you through the rest.
Step 3. Add Your Devices
Tap the button in the app and select
Device to add your new Light Strip. Follow app
instructions to complete the setup.

4
Step 4. Connect All the Parts
Connect the Power Adapter, Controller and
the Light Strip before powering it up.
Step 5. Power Up Light Strip
Plug in the power adapter and wait until the
Light Strip animates orange and green.
Note: Do not roll up when using. Spread out the Light
Strip before connect the power supply.
Step 6. Join Your Light Strip's Wi-Fi
Join your Light Strip's Wi-Fi to continue the
setup.

5
Step 7. Join Your Home's Wi-Fi
Select your home Wi-Fi to connect.
Step 8. Setup Complete
Now you can start using your Light Strip.

6
Cut Only On Specic Areas of Light Strip
You can custom tailor the length of your Light Strip with scissors.
Unplug the Light Strip and cut only on these specic areas or your
Light Strip will no longer function.
Avoid Bending on LED Beads
The bend should be avoided just in the position of the LED components,
so as not to damage the product and aect the life of the product.
Avoid Sharp Corners
Use gentle weeps when bending Light Strip around corners and
avoid creases as they may cause damage.
Avoid Sharp Turns
Carefully roll the Light Strip into a clover or use a gentle hill when
making 90° turns like those need behind a TV. Sharp bends can
damage your Light Strip.
≥90° LED
INSTALLATION
TIPS
Install Your Smart Light Strip
After you have set up the Light Strip via the Kasa Smart app, you can cut it to length-t and attach it to any surface with the 3M adhesive.
To avoid damaging your Light Strip, please note the following Installation Tips before installing the Light Strip.

7
Step 1. Choose Location
Choose a dry, clean, and smooth surface. Wipe o the dust.
Otherwise, the Light Strip will be easily fall o.
Note: Choose a location that avoids static and stays away from water splashing.
Step 2. Remove Adhesive Tape
Unplug the Light Strip rst. Peel away the 3M adhesive backing
bit by bit and stick your Light Strip to the surface.
Note: Do not peel o the tape under the 3M adhesive backing.
Step 3. Stick Light Strip
Stick the Light Strip and press over it about 10-15 seconds.
Secure the controller with the adhesive pads. Do not move
it to other place after it is attached.
Step 4. Power Up Light Strip
Plug in the power adapter to power on your Light Strip.
INSTALL
LIGHT
STRIP

8
Main Device Control
After you successfully set up your Light Strip, you will see the Devices page on the Kasa Smart app. You can add new devices, control multiple devices
simultaneously in a group, congure account settings, and more.
Add a Group
Ta p +and select Group to add a group for controlling multiple devices
simultaneously.
Congure Kasa Settings
Swipe right and you can congure
settings for your Kasa account or
get more information about Kasa.
Devices Page
On the Devices page, you can instantly
turn on/o the Light Strip, adjust
brightness or change colors.
ON
OFF

9
Congure Your Smart Light Strip
On the Devices page, tap a Light Strip and you can adjust the light brightness or color, set schedules, save a shortcut for a light eect, track energy
consumption and congure the Light Strip settings.
Power On/O At One Tap
Quickly power on or o your Light Strip with a
single button.
Adjust Brightness
Dim your Light Strip with a range from 1% to
100%.
Adjust Color
Choose a preferred color for your Light Strip.

10
Add One-Tap Presets
To save a shortcut for a color eect, choose a color and brightness you
want, then tap + and the current eect will be saved for quick access.
Delete Presets
To delete a preset, just select one and tap ×, and then tap Delete.

11
Add Eects
Tap and tap any color eect, then your Light Strip will go to the certain light eect instantly. You can also customize the color eect and apply it to
your Light Strip in Customized Eects.

12
• Customized Eects
Your Light Strip provides you with multiple default lighting eects. You can select any of them and customize it as you want. Follow the steps below to
customize a lighting eect.
1. Tap Create New.
2. Select an eect to customize, then tap Next.
3. Customize the eect name, color eect and the animation speed as you want, then tap Save.
Select the color as you like.
Tap to let Kasa select random colors for
this light eect.
Slide to adjust the animation speed for
this light eect.

13
Track Energy Usage
Tap to view and track energy consumption of your Light Strip.
Add Schedules
Tap to add schedules to simplify your daily routine by creating
automatic On/O actions.

14
Congure Device Settings
Tap to congure device settings and check device information.
Customize the device name and icon.
Set the default state when your Light Strip is turned on from the app. For
example, if you select Last "ON" State and then turn it on from the app, your
Light Strip will go to the state when it was last turned on.
Set the default state when your Light Strip is turned on from the power
source. For example, if you select Last "ON" State and then turn it on from
power source, your Light Strip will go to the state when it was last turned on.
Check what's new with your Light Strip.
Check device and network information.
Check how to install your Light Strip.

15
Create Scenes
A scene is a preset group of smart devices that can be customized and activated simultaneously at the touch of a button from your smartphone or
tablet, allowing you to easily set your mood, activity or t any special occasion. This page allows you to preset how your smart home devices should act
automatically at special occasions.
1. On the Scenes page, tap +. 2. Choose a default one or customize
a new scene.
3. Tap the Light Strip and set what would you like it to do when the scene
is run.

16
4. Pick an icon for your Light Strip. 5. Set a name for the scene. 6. After created the new scene, tap
the scene to apply it.

17
Schedule A Scene
After you created a scene, you can schedule it to be applied automatically at the time specied. For example, if you want to automatically apply your
scene "TV Time" at 7:33 PM every weekday, follow the steps below.
1. Go to Smart Actions page and
tap Add an Action.
2. Select Schedule a Scene. 3. Select a scene and set a time
schedule for the scene.
4. Give this schedule a name to
help you remember.

18
Auto-O Timer
Whenever your smart bulb is turned on, you can turn it o after the designated amount of time by setting an auto-o timer for the device. For example,
if you want your Light Strip to turn o automatically after being turned on for 21 minutes, follow the steps below:
1. Go to Smart Actions page and
tap Add an Action.
2. Select Auto-O Timer.3. Select a device and set the auto-
o timer for the device.
4. Give this timer a name to help
you remember.